Showing 1–50 of 125 results for author: Qi, J

Transformer-based Neural Operators for 3D Wind Field Prediction over Complex Mountainous Terrain

Authors: Yujia Zhang, Jiaxi Qi, Ruiyan Chen, Yong Liu, Yuzhou Zhang, Lyulin Kuang, Rita Zhang, Shengze Cai

Abstract: Accurate prediction of three-dimensional (3D) wind fields over complex mountainous terrain is essential for renewable energy deployment and regional weather modeling. Traditional computational fluid dynamics (CFD) simulations face two fundamental bottlenecks: expert-intensive mesh generation around irregular topography, and iterative solvers that require hours to days even on high-performance clus… ▽ More Accurate prediction of three-dimensional (3D) wind fields over complex mountainous terrain is essential for renewable energy deployment and regional weather modeling. Traditional computational fluid dynamics (CFD) simulations face two fundamental bottlenecks: expert-intensive mesh generation around irregular topography, and iterative solvers that require hours to days even on high-performance clusters. Recent neural operator approaches accelerate inference, but typically fail to resolve the sharp, localized velocity gradients induced by complex terrain features. Here, we present a transformer-based dual-attention neural-operator framework for 3D wind field prediction over complex mountainous terrain, and validate its effectiveness through two instantiations on representative point-based (mesh-free) and graph-based neural-operator architectures, namely Patch-solver and Patch-GTO. Trained on a large CFD-generated dataset spanning diverse terrain geometries and inflow conditions, the framework enables rapid prediction of steady-state wind field while maintaining competitive accuracy. It also demonstrates robust zero-shot transfer to real-world mountainous sites across several diverse locations, outperforming existing neural operator baselines by 10% in relative error. We further verify that incorporating sparse observational data (1% spatial coverage) reduces prediction error by 16.89% relative to the corresponding model without sparse data input and by 32.75% relative to advanced neural operator baselines on unseen terrains. This framework establishes a generalizable computational paradigm across domains, promising to be a real-time tool for wind resource assessment over complex mountainous terrain and related atmosphere-surface interaction studies. △ Less

Submitted 25 May, 2026; originally announced May 2026.

Comments: 50 pages, 10 figures. Accepted for publication in Communications Physics-Nature

Hybrid-Integrated DFB-Laser-Coupled 1 * 8 Thin-Film Lithium Niobate Modulator Array for High-Speed Parallel Optical Transmitters

Authors: Qiyue Hu, Junxia Zhou, Zhe Wang, Botao Fu, Jinming Chen, Yunpeng Song, Dewei Zhang, Yuheng Chen, Jinxin Huang, Min Wang, Jia Qi, Ya Cheng

Abstract: Thin-film lithium niobate (TFLN) electro-optic modulators are attractive for high-speed optical interconnects, but scalable transmitter architectures require not only high modulation bandwidth but also multi-channel optical power distribution and practical laser-to-chip integration. Here, we demonstrate a hybrid-integrated 1 * 8 TFLN electro-optic modulator array passively butt-coupled to a 1550 n… ▽ More Thin-film lithium niobate (TFLN) electro-optic modulators are attractive for high-speed optical interconnects, but scalable transmitter architectures require not only high modulation bandwidth but also multi-channel optical power distribution and practical laser-to-chip integration. Here, we demonstrate a hybrid-integrated 1 * 8 TFLN electro-optic modulator array passively butt-coupled to a 1550 nm distributed-feedback laser. The chip integrates a three-stage cascaded 1 * 2 multimode-interference splitter, spot-size converters, eight traveling-wave Mach-Zehnder modulators, thermal tuning electrodes, and on-chip 50 Ω terminations. The cascaded splitter provides uniform optical power distribution with a maximum normalized power deviation of 9.7%, while the optimized electrodes enable electro-optic 3 dB bandwidths exceeding 40 GHz for all channels. The measured half-wave voltages are 3.60-3.83 V, corresponding to VπL products of 2.52-2.68 V cm for a 7 mm modulation length, and the extinction ratio reaches approximately 25 dB. The bare-chip insertion loss is 15.19-16.55 dB, and DFB laser bonding introduces an additional coupling loss of approximately 5 dB while preserving channel uniformity. These results establish a practical TFLN-based multi-channel modulator platform and represent a step toward compact hybrid-integrated optical transmitters for high-speed parallel interconnects. △ Less

Submitted 20 May, 2026; originally announced May 2026.

GeoNDC: A Queryable Neural Data Cube for Planetary-Scale Earth Observation

Authors: Jianbo Qi, Mengyao Li, Baogui Jiang, Yidan Chen, Xihan Mu, Qiao Wang

Abstract: Satellite Earth observation has accumulated massive spatiotemporal archives essential for monitoring environmental change, yet these remain organized as discrete raster files, making them costly to store, transmit, and query. We present GeoNDC, a queryable neural data cube that encodes planetary-scale Earth observation data as a continuous spatiotemporal implicit neural field, enabling on-demand q… ▽ More Satellite Earth observation has accumulated massive spatiotemporal archives essential for monitoring environmental change, yet these remain organized as discrete raster files, making them costly to store, transmit, and query. We present GeoNDC, a queryable neural data cube that encodes planetary-scale Earth observation data as a continuous spatiotemporal implicit neural field, enabling on-demand queries and continuous-time reconstruction without full decompression. Experiments on a 20-year global MODIS MCD43A4 reflectance record ($8016 \times 4008$ pixels, 7 bands, 915 temporal frames) show that the learned representation supports direct spatiotemporal queries on consumer hardware. On Sentinel-2 imagery (10 m), continuous temporal parameterization recovers cloud-free dynamics with high fidelity ($R^2 > 0.85$) under simulated 2-km cloud occlusion. On HiGLASS biophysical products (LAI and FPAR), GeoNDC attains near-perfect accuracy ($R^2 > 0.98$). The representation compresses the 20-year MODIS archive to 0.44\,GB -- approximately 95:1 relative to an optimized Int16 baseline -- with high spectral fidelity (mean $R^2 > 0.98$, mean RMSE $= 0.021$). These results suggest GeoNDC offers a unified AI-native representation for planetary-scale Earth observation, complementing raw archives with a compact, analysis-ready data layer integrating query, reconstruction, and compression in a single framework. △ Less

Submitted 26 March, 2026; v1 submitted 26 March, 2026; originally announced March 2026.

Comments: 22 pages, 8 figures

Quantitative Dynamic Phase Mapping via Single-Arm Field-Correlation Ghost Imaging

Authors: Chaoran Wang, Jinquan Qi, Shuang Liu, Xingzhao Jiang, Shensheng Han

Abstract: We demonstrate a single-arm optical platform for phase-retrieval-free, quantitative dynamic phase mapping of continuous transparent media via field-correlation ghost imaging. By modeling the medium as a dynamic pure-phase object, we spatially encode and compress its two-dimensional (2D) complex transmittance into a single bucket detector. Balanced heterodyne detection downconverts the optical freq… ▽ More We demonstrate a single-arm optical platform for phase-retrieval-free, quantitative dynamic phase mapping of continuous transparent media via field-correlation ghost imaging. By modeling the medium as a dynamic pure-phase object, we spatially encode and compress its two-dimensional (2D) complex transmittance into a single bucket detector. Balanced heterodyne detection downconverts the optical frequencies for direct digitization. Crucially, by mapping spatial information into the temporal domain, this single-pixel architecture exploits high-speed digitization to continuously resolve 2D phase dynamics, effectively bypassing the frame-rate bottlenecks of traditional array sensors. Coupled with intermediate-frequency spectral analysis, this establishes a direct linear mapping from the recorded signal to the physical phase. The complex amplitude is thus deterministically extracted via field-correlation, enabling the spatial reconstruction of 2D acoustic pressure distributions using a pseudo-inverse algorithm. Experimental validations in an acoustic levitator confirm that the optically extracted acoustic wavelengths strictly match theoretical dispersion models, exhibiting a robust linear correlation between the retrieved phase shift and local sound pressure levels. This deterministic methodology provides a real-time-capable metrological tool for characterizing rapidly evolving phenomena, including transient aeroacoustic flows, shockwaves, and microfluidic biological dynamics. △ Less

Submitted 2 July, 2026; v1 submitted 23 March, 2026; originally announced March 2026.

Comments: 9 pages, 4 figures

Decoupling Spatio-Temporal Dynamics: Microvibration Imaging Using Coherent Detection Ghost Imaging Lidar

Authors: Shuang Liu, Jinquan Qi, Chaoran Wang, Chenjin Deng, Shensheng Han

Abstract: Imaging the full-field microvibration of extended targets remains a formidable challenge for conventional remote sensing. Traditional array-based sensors are often severely constrained by data throughput and sensitivity limits when scaling to high spatial resolutions, while point-scanning interferometric systems lack the instantaneous full-field capability required to capture transient, spatially… ▽ More Imaging the full-field microvibration of extended targets remains a formidable challenge for conventional remote sensing. Traditional array-based sensors are often severely constrained by data throughput and sensitivity limits when scaling to high spatial resolutions, while point-scanning interferometric systems lack the instantaneous full-field capability required to capture transient, spatially coupled vibration modes. To overcome these limitations, we propose a Coherent Detection-Ghost Imaging (CD-GI) framework that synergizes the spatial multiplexing capability of single-pixel imaging with the high-dimensional sensitivity of coherent detection. We establish a comprehensive mathematical model that describes the coupling mechanism of the target's spatial distribution and temporal micro-dynamics within a 1D bucket detector signal. To resolve the resulting inverse problem, we develop a frequency-channel self-calibration scheme. This approach effectively decouples the micro-Doppler signatures from spatial speckle patterns without requiring prior knowledge of the vibration frequency. Experimental results demonstrate that our system successfully reconstructs the spatially resolved microvibration patterns of adjacent targets with a frequency difference as small as 1 Hz, achieving sub-wavelength vibration sensitivity. This work bridges the gap between computational imaging and coherent metrology, offering a robust solution for non-invasive, high-precision structural health monitoring. △ Less

Submitted 27 February, 2026; originally announced February 2026.

Multi-mode Coherent Detection Ghost Imaging Lidar and Vibration-Mode Imaging

Authors: Jinquan Qi, Shuang Liu, Chenjin Deng, Chaoran Wang, Zunwang Bo, Youzhen Gui, Shensheng Han

Abstract: Coherent detection ghost imaging lidar (CD-GI lidar) integrates ghost imaging with coherent detection, thereby achieving enhanced anti-interference and phase-resolved imaging capability. Here, we propose a bucket-detector-based multi-mode coherent detection scheme for CD-GI lidar, where the reflected multi-mode light fields are coherently mixed with a single-mode local oscillator (LO) at the bucke… ▽ More Coherent detection ghost imaging lidar (CD-GI lidar) integrates ghost imaging with coherent detection, thereby achieving enhanced anti-interference and phase-resolved imaging capability. Here, we propose a bucket-detector-based multi-mode coherent detection scheme for CD-GI lidar, where the reflected multi-mode light fields are coherently mixed with a single-mode local oscillator (LO) at the bucket detector photosensitive plane. The bucket-detector-based multi-mode CD-GI lidar system breaks the constraints of Siegman antenna theorem by utilizing field correlation to decouple the reflected multi-mode light fields and reconstructs the spatial distribution of targets' vibration modes. Theoretical analysis of the bucket-detector-based multi-mode CD-GI lidar system is presented in this work, and its feasibility is verified through a series of experiments. △ Less

Submitted 1 February, 2026; v1 submitted 20 January, 2026; originally announced January 2026.

Comments: 16 pages, 7 figures

Light Propagation through Space-Time Non-Markovian Random Media

Authors: Chaoran Wang, Jinquan Qi, Shuang Liu, Chenjin Deng, Shensheng Han

Abstract: Here, we introduce a stochastic partial differential equation (SPDE) formulation driven by temporally correlated noise to describe light propagation beyond the standard Markov approximation. By representing the squared refractive index fluctuations as a random field with explicit long-range temporal correlations, we demonstrate that the propagation dynamics map exactly onto the hyperbolic Anderson… ▽ More Here, we introduce a stochastic partial differential equation (SPDE) formulation driven by temporally correlated noise to describe light propagation beyond the standard Markov approximation. By representing the squared refractive index fluctuations as a random field with explicit long-range temporal correlations, we demonstrate that the propagation dynamics map exactly onto the hyperbolic Anderson model. This rigorous mapping enables the derivation of new quantitative scaling relations that connect the environment's non-Markovian memory effects to the statistical properties of the emergent light field. We experimentally validate these analytical predictions in an outdoor atmospheric environment, confirming the memory-dependent statistical signatures of the propagated light. Our results establish a precise physical foundation for understanding memory-driven wave phenomena, providing crucial insights for free-space optical communication, remote sensing, and coherent imaging. △ Less

Submitted 16 March, 2026; v1 submitted 16 January, 2026; originally announced January 2026.

Comments: 3figures

Programmable radio-frequency calculations in electromagnetic-wave domain

Authors: Shao Nan Chen, Zhan Ye Chen, Si Ran Wang, Bi Rui, Jin Feng Kang, Zheng Xing Wang, Zhen Jie Qi, Lijie Wu, Hui Dong Li, Jun Yan Dai, Qiang Cheng, Tie Jun Cui

Abstract: Information metasurfaces have emerged as pivotal components in next-generation electronic systems, with significant progress in their applications to communication, radar, and sensing. However, the current researches are mainly focused on their physical structures and system functions, while radio-frequency (RF) signal processing and calculation remain constrained to digital-domain operations. Thi… ▽ More Information metasurfaces have emerged as pivotal components in next-generation electronic systems, with significant progress in their applications to communication, radar, and sensing. However, the current researches are mainly focused on their physical structures and system functions, while radio-frequency (RF) signal processing and calculation remain constrained to digital-domain operations. This reliance on digital conversion inherently increases hardware complexity and power consumption. To address this challenge, we propose a programmable RF calculation system based on a space-time-coding metasurface (STCM), which can control the wave-matter interactions through space-time-coding (STC) strategies and achieve direct RF calculations in the electromagnetic (EM) space in a reprogrammable way. Particularly, the fundamental signal operations - Fourier transform and convolution - are implemented in the EM-wave domain successfully. We validate the RF calculation capabilities in radar scenarios, facilitating the accurate detection of target velocity and range. Theoretical analysis, numerical simulations, and experimental results collectively demonstrate that the STCM-based RF calculation system exhibits superior precision, enhanced operational efficiency, and notable cost-effectiveness, highlighting its significant potentials for the next-generation electronic system deployments. △ Less

Submitted 12 January, 2026; originally announced January 2026.

Non-Inductive Current Start-Up Using Multi-Harmonic Electron Cyclotron Wave and Current Ramp-Up Through Combined Electron Cyclotron Wave and Ohmic Heating in EXL-50U Spherical Torus

Authors: Xinchen Jiang, Yuejiang Shi, Yueng-Kay Martin Peng, Shaodong Song, Wenjun Liu, Xianming Song, Xiang Gu, Ji Qi, Dong Guo, Debabrata Banerjee, Lili Dong, Zhenxing Wang, Chunyan Li, Junquan Lin, Pingwei Zheng, Haojie MA, Huasheng Xie, Jiaqi Dong, Qingwei Yang, Yunfeng Liang, Baoshan Yuan, Xianmei Zhang, Minsheng Liu, EXL-50U team

Abstract: The non-inductive current start-up by multi-harmonic electron cyclotron wave has been systematically investigated in the EXL-50U spherical torus. Significant enhancements of the driven current with increasing number of resonance layers have been demonstrated by variation of the number of harmonic resonance layers of the ECW through adjustment of the magnetic field or plasma cross section. The crit… ▽ More The non-inductive current start-up by multi-harmonic electron cyclotron wave has been systematically investigated in the EXL-50U spherical torus. Significant enhancements of the driven current with increasing number of resonance layers have been demonstrated by variation of the number of harmonic resonance layers of the ECW through adjustment of the magnetic field or plasma cross section. The critical role of multi-harmonic ECW in enhancing the driven current has been experimentally verified for the first time. To explain the related experimental observations, a physical mechanism involving multi-harmonic heating, multiple reflections, and multi-pass absorption - leading to the generation of high-energy electrons via X-mode wave or electron Bernstein wave has been proposed. The current drive capacity of the first harmonic extraordinary mode of the ECW has also been experimentally confirmed for the first time. After the application of Ohmic heating during the current ramp-up phase, the current drive efficiency of ECW is further enhanced. Leveraging the synergistic effect between ECW and Ohmic heating, EXL-50U achieved a plasma current of 1 MA, with the non-inductively driven current fraction reaching 70%. △ Less

Submitted 21 December, 2025; originally announced December 2025.

Spatial-spectral mapping for long-duration broadband terahertz pulse generation in on-chip waveguide arrays

Authors: Yibo Huang, Yao Lu, Haoyu Duan, Chao Wang, Xitan Xu, Jiwei Qi, Qiang Wu, Jingjun Xu

Abstract: Conventional approaches to terahertz (THz) pulse generation are restricted by the Fourier-transform limit, which hinders the creation of sources that combine long duration with broad bandwidth--a capability crucial for many spectroscopic and sensing applications. In this work, we overcome this challenge in the terahertz domain using an on-chip gradient waveguide array. The key is to spectrally dis… ▽ More Conventional approaches to terahertz (THz) pulse generation are restricted by the Fourier-transform limit, which hinders the creation of sources that combine long duration with broad bandwidth--a capability crucial for many spectroscopic and sensing applications. In this work, we overcome this challenge in the terahertz domain using an on-chip gradient waveguide array. The key is to spectrally disperse the pulse into spatially separated channels within a lithium niobate chip, effectively decoupling the design of temporal and spectral properties. We validate the source by distinguishing amino acid mixtures, demonstrating its tailored biosensing potential. This work establishes a novel mechanism for integrated THz generation, offering considerable promise for broadband spectroscopy and on-chip photonics. △ Less

Submitted 11 December, 2025; originally announced December 2025.

Comments: 12 pages, 4 figures; references bibtex

A Linear-Scaling, Charge-Aware Foundation Potential for Atomistic Simulations

Authors: Tsz Wai Ko, Runze Liu, Adesh Rohan Mishra, Zihan Yu, Ji Qi, Shyue Ping Ong

Abstract: Electrostatics govern charge transfer and reactivity in materials. However, most foundation potentials (FPs) either neglect explicit electrostatic interactions or come at prohibitive computational cost. Here, we introduce charge-equilibrated TensorNet (QET), an equivariant, charge-aware architecture that achieves linear scaling with system size via an analytically solvable charge-equilibration sch… ▽ More Electrostatics govern charge transfer and reactivity in materials. However, most foundation potentials (FPs) either neglect explicit electrostatic interactions or come at prohibitive computational cost. Here, we introduce charge-equilibrated TensorNet (QET), an equivariant, charge-aware architecture that achieves linear scaling with system size via an analytically solvable charge-equilibration scheme. We demonstrate that a trained QET FP matches state-of-the-art FPs on materials property benchmarks but delivers qualitatively different predictions in systems dominated by electrostatic interactions. The QET FP reproduces the correct structure and density of the NaCl-CaCl2 ionic liquid and the crystallization of Ge1Sb2Te4 phase change memory, which charge-agnostic FPs miss. We further show that a fine-tuned QET captures reactive processes at the Li/Li6PS5Cl solid-electrolyte interface and supports simulations under applied electrochemical potentials. These results remove a fundamental constraint in large-scale atomistic simulations of electrostatics and establish a general, data-driven framework for charge-aware FPs with transformative applications in energy storage, catalysis, and beyond. △ Less

Submitted 15 August, 2026; v1 submitted 10 November, 2025; originally announced November 2025.

Comments: 63 pages (43 for Manuscript + 20 for SI), 21 figures (5 for Manuscript + 16 for SI)

AI-assisted design of chemically recyclable polymers for food packaging

Authors: Brandon K. Phan, Chiho Kim, Janhavi Nistane, Wei Xiong, Haoyu Chen, Woo Jin Jang, Farzad Gholami, Yongliang Su, Jerry Qi, Ryan Lively, Will Gutekunst, Rampi Ramprasad

Abstract: Polymer packaging plays a crucial role in food preservation but poses major challenges in recycling and environmental persistence. To address the need for sustainable, high-performance alternatives, we employed a polymer informatics workflow to identify single- and multi-layer drop-in replacements for polymer-based packaging materials. Machine learning (ML) models, trained on carefully curated pol… ▽ More Polymer packaging plays a crucial role in food preservation but poses major challenges in recycling and environmental persistence. To address the need for sustainable, high-performance alternatives, we employed a polymer informatics workflow to identify single- and multi-layer drop-in replacements for polymer-based packaging materials. Machine learning (ML) models, trained on carefully curated polymer datasets, predicted eight key properties across a library of approximately 7.4 million ring-opening polymerization (ROP) polymers generated by virtual forward synthesis (VFS). Candidates were prioritized by the enthalpy of polymerization, a critical metric for chemical recyclability. This screening yielded thousands of promising candidates, demonstrating the feasibility of replacing diverse packaging architectures. We then experimentally validated poly(p-dioxanone) (poly-PDO), an existing ROP polymer whose barrier performance had not been previously reported. Validation showed that poly-PDO exhibits strong water barrier performance, mechanical and thermal properties consistent with predictions, and excellent chemical recyclability (95% monomer recovery), thereby meeting the design targets and underscoring its potential for sustainable packaging. These findings highlight the power of informatics-driven approaches to accelerate the discovery of sustainable polymers by uncovering opportunities in both existing and novel chemistries. △ Less

Submitted 3 November, 2025; originally announced November 2025.

Comments: Main body is 14 pages with 5 figures. Supplementary Information is 15 pages with 8 figures

Ambient-Stable Transfer-Free Graphdiyne Wafers with Superhigh Hole Mobility at Room Temperature

Authors: Beining Ma, Jianyuan Qi, Xinghai Shen

Abstract: Graphdiyne (GDY) is recognized as a compelling candidate for the fabrication of next-generation high-speed low-energy electronic devices due to its inherent p-type semiconductor characteristics. However, the development of GDY for applications in field-effect transistors (FETs), complementary metal-oxide-semiconductor (CMOS), and logic devices remains constrained by the relatively low carrier mobi… ▽ More Graphdiyne (GDY) is recognized as a compelling candidate for the fabrication of next-generation high-speed low-energy electronic devices due to its inherent p-type semiconductor characteristics. However, the development of GDY for applications in field-effect transistors (FETs), complementary metal-oxide-semiconductor (CMOS), and logic devices remains constrained by the relatively low carrier mobility reported in current experimental studies. Herein, the synthesis of layer-controlled hydrogen-substituted graphdiyne (HsGDY) films directly on silicon substrates under a supercritical CO2 atmosphere is reported, along with the fabrication of these films into HsGDY-based FETs. The transfer-free growth strategy eliminates performance degradation caused by post-synthesis transfer processes. The resulting HsGDY FETs exhibit a remarkable hole mobility of up to 3800 cm2 V-1 s-1 at room-temperature, which is an order of magnitude higher than that of most p-type semiconductors. The synthesis of transfer-free HsGDY wafers provides a new strategy for resolving the carrier mobility mismatch between p-channel and n-channel two-dimensional metal-oxide-semiconductor devices. △ Less

Submitted 10 October, 2025; originally announced October 2025.

A Room-Temperature Ferrotoroidic Material Exhibiting Magnetic Semiconductor Properties with Superhigh Hole Mobility

Authors: Jianyuan Qi, Shijie Xiong, Beining Ma, Xinghai Shen

Abstract: The design and fabrication of room-temperature ferrotoroidic materials and magnetic semiconductors are recognized worldwide as a great challenge, and of both theoretical and practical importance in the field of condensed matter physics and information storage. Reported herein are ferrotoroidic crystal powder and film formed by supramolecular self-assembly based on uranyl and cyclodextrin, with the… ▽ More The design and fabrication of room-temperature ferrotoroidic materials and magnetic semiconductors are recognized worldwide as a great challenge, and of both theoretical and practical importance in the field of condensed matter physics and information storage. Reported herein are ferrotoroidic crystal powder and film formed by supramolecular self-assembly based on uranyl and cyclodextrin, with the Curie temperature above room temperature. Experimental measurements and calculations demonstrate spontaneous vortex-like alignment of magnetic moments and furthermore a macroscopic long-range arrangement in the crystal, which breaks simultaneously space-inversion and time-reversal symmetries, exhibiting strong superexchange, spin-orbit coupling as well as anomalous Hall effect (AHE). The electrical measurements show the film with a superhigh carrier mobility of 3200 cm2*V-1*s-1 and a Hall resistivity as high as 0.32 mV*A-1*cm at room temperature. This work is expected to pave greatly the applied research on new-generation magnetoresistive random access memory (MRAM), especially as flexible material. △ Less

Submitted 6 February, 2026; v1 submitted 10 October, 2025; originally announced October 2025.

Gas Electroluminescence in a Dual Phase Xenon-Doped Argon Detector

Authors: James W. Kingston, Jianyang Qi, Jingke Xu, Ethan P. Bernard, Adam D. Tidball, Alec W. Peck, Nathaniel S. Bowden, Mani Tripathi, Kaixuan Ni, Shawn Westerdale

Abstract: Noble element detectors using argon or xenon as the detection medium are widely used in the searches for rare neutrino and dark matter interactions. Xenon doping in liquid argon can preserve attractive properties of an argon target while enhancing the detectable signals with properties of xenon. In this work, we deployed a dual-phase liquid argon detector with up to 4% xenon doping in the liquid a… ▽ More Noble element detectors using argon or xenon as the detection medium are widely used in the searches for rare neutrino and dark matter interactions. Xenon doping in liquid argon can preserve attractive properties of an argon target while enhancing the detectable signals with properties of xenon. In this work, we deployed a dual-phase liquid argon detector with up to 4% xenon doping in the liquid and studied its gas electroluminescence properties as a function of xenon concentration. At $\sim$2% xenon doping in liquid argon, we measured $\sim$34 ppm of xenon in the gas and observed $\sim$2.5 times larger electroluminescence signals in the detector than those in pure argon. By analyzing signals recorded by photosensors of different wavelength sensitivities, we confirm that the argon gas electroluminescence process is strongly affected by the addition of xenon. We propose an analytical model to describe the underlying energy transfer mechanism in argon-xenon gas mixtures. Lastly, the implications of this measurement for low energy ionization signal detection will be discussed. △ Less

Submitted 26 February, 2026; v1 submitted 2 October, 2025; originally announced October 2025.

Comments: 20 pages, 19 figures

Report number: LLNL-JRNL-2010955

A data-driven global ocean forecasting model with sub-daily and eddy-resolving resolution

Authors: Yuan Niu, Qiusheng Huang, Xiaohui Zhong, Anboyu Guo, Lei Chen, Xiaoyan Jia, Jiawei Qi, Dianjun Zhang, Hao Li, Xuefeng Zhang

Abstract: High-fidelity ocean forecasting at high spatial and temporal resolution is essential for capturing fine-scale dynamical features, with profound implications for hazard prediction, maritime navigation, and sustainable ocean management. While conventional numerical models can generate sub-daily, eddy-resolving forecasts, they demand substantial computational resources and often struggle to maintain… ▽ More High-fidelity ocean forecasting at high spatial and temporal resolution is essential for capturing fine-scale dynamical features, with profound implications for hazard prediction, maritime navigation, and sustainable ocean management. While conventional numerical models can generate sub-daily, eddy-resolving forecasts, they demand substantial computational resources and often struggle to maintain predictive skill at such fine scales. Data-driven models offer a promising alternative with significantly higher computational efficiency; however, most are constrained to daily outputs and show a rapid decay in accuracy when extended to sub-daily timescales. Here, we introduce TianHai, the first-of-its-kind global data-driven 6-hour forecasting model, which delivers predictions at 1/12° eddy-resolving resolution with a vertical extent down to 1,500 m. A key feature of TianHai is the integration of atmospheric forcings through FuXi-Atmosphere, a data-driven atmospheric forecasting system, which enables the explicit representation of air-sea coupling effects. Unlike conventional approaches, TianHai does not rely on numerical atmospheric models or external meteorological forecasts, making it a fully data-driven framework for coupled prediction. Benchmark experiments demonstrate that TianHai delivers state-of-the-art performance in forecasting temperature and salinity profiles, zonal and meridional currents, sea surface temperature, and sea level anomalies for lead times ranging from 1 to 10 days. △ Less

Submitted 26 September, 2025; v1 submitted 21 September, 2025; originally announced September 2025.

Comments: Due to numerous errors and academic issues in the article that cannot be fixed in a short period of time, and to avoid causing confusion for other researchers, we have decided to retract the paper first. We will consider resubmitting it after making improvements in the future

MetamatBench: Integrating Heterogeneous Data, Computational Tools, and Visual Interface for Metamaterial Discovery

Authors: Jianpeng Chen, Wangzhi Zhan, Haohui Wang, Zian Jia, Jingru Gan, Junkai Zhang, Jingyuan Qi, Tingwei Chen, Lifu Huang, Muhao Chen, Ling Li, Wei Wang, Dawei Zhou

Abstract: Metamaterials, engineered materials with architected structures across multiple length scales, offer unprecedented and tunable mechanical properties that surpass those of conventional materials. However, leveraging advanced machine learning (ML) for metamaterial discovery is hindered by three fundamental challenges: (C1) Data Heterogeneity Challenge arises from heterogeneous data sources, heteroge… ▽ More Metamaterials, engineered materials with architected structures across multiple length scales, offer unprecedented and tunable mechanical properties that surpass those of conventional materials. However, leveraging advanced machine learning (ML) for metamaterial discovery is hindered by three fundamental challenges: (C1) Data Heterogeneity Challenge arises from heterogeneous data sources, heterogeneous composition scales, and heterogeneous structure categories; (C2) Model Complexity Challenge stems from the intricate geometric constraints of ML models, which complicate their adaptation to metamaterial structures; and (C3) Human-AI Collaboration Challenge comes from the "dual black-box'' nature of sophisticated ML models and the need for intuitive user interfaces. To tackle these challenges, we introduce a unified framework, named MetamatBench, that operates on three levels. (1) At the data level, we integrate and standardize 5 heterogeneous, multi-modal metamaterial datasets. (2) The ML level provides a comprehensive toolkit that adapts 17 state-of-the-art ML methods for metamaterial discovery. It also includes a comprehensive evaluation suite with 12 novel performance metrics with finite element-based assessments to ensure accurate and reliable model validation. (3) The user level features a visual-interactive interface that bridges the gap between complex ML techniques and non-ML researchers, advancing property prediction and inverse design of metamaterials for research and applications. MetamatBench offers a unified platform deployed at http://zhoulab-1.cs.vt.edu:5550 that enables machine learning researchers and practitioners to develop and evaluate new methodologies in metamaterial discovery. For accessibility and reproducibility, we open-source our benchmark and the codebase at https://github.com/cjpcool/Metamaterial-Benchmark. △ Less

Submitted 8 May, 2025; originally announced May 2025.

Comments: 15 pages

ACM Class: I.2.0; H.5; J.2; E.0

Dispersion-Engineered Compact Twisted Metasurfaces Enabling 3D Frequency-Reconfigurable Holography

Authors: Cheng Pang, Yuzhong Wang, Pengcheng Wang, Axiang Yu, Yiding Liu, Ziang Yue, Mingshuang Hu, Jianqi Hu, Yongkang Dong, Jiaran Qi

Abstract: Flexible dispersion manipulation is critical for holography to achieve broadband imaging or frequency division multiplexing. Within this context, metasurface-based holography offers advanced dispersion control, yet dynamic reconfigurability remains largely unexplored. This work develops a dispersion-engineered inverse design framework that enables 3D frequency-reconfigurable holography through a t… ▽ More Flexible dispersion manipulation is critical for holography to achieve broadband imaging or frequency division multiplexing. Within this context, metasurface-based holography offers advanced dispersion control, yet dynamic reconfigurability remains largely unexplored. This work develops a dispersion-engineered inverse design framework that enables 3D frequency-reconfigurable holography through a twisted metasurface system. The physical implementation is based on a compact layered configuration that cascades the broadband radiation-type metasurface (RA-M) and phase-only metasurface (P-M). The RA-M provides a phase-adjustable input to excite P-M, while the rotation of P-M creates a reconfigurable response of holograms. By employing the proposed scheme, dynamic switching of frequency-space multiplexing and achromatic holograms are designed and experimentally demonstrated in the microwave region. This method advances flexible dispersion engineering for metasurface-based holography, and the compact system holds significant potential for applications in ultra-broadband imaging, high-capacity optical display, and switchable meta-devices. △ Less

Submitted 3 April, 2025; originally announced April 2025.

High Numerical Aperture Achromatic Meta-Devices through Dispersion Compensation

Authors: Yuzhong Wang, Axiang Yu, Yayun Cheng, Yongkang Dong, Jiaran Qi, Andrea Alu

Abstract: Dispersion engineering is a long-standing challenge in optical systems, and it is particularly important for metasurfaces, which naturally suffer from strong chromatic aberrations due to their ultralow profile. Stacks of metasurfaces have recently implemented dispersion control to address these challenges. However, these approaches still suffer from bottlenecks in terms of the available material r… ▽ More Dispersion engineering is a long-standing challenge in optical systems, and it is particularly important for metasurfaces, which naturally suffer from strong chromatic aberrations due to their ultralow profile. Stacks of metasurfaces have recently implemented dispersion control to address these challenges. However, these approaches still suffer from bottlenecks in terms of the available material refractive index and required aspect ratios, resulting in limited phase and group delay coverage, constraining their numerical aperture (NA), size and operating bandwidth. To address these challenges, we explore a dispersion compensation strategy combined with full-wave simulation-free inverse design to implement ultra-high NA, broadband dispersion control in metasurfaces, not requiring large refractive index materials and high aspect ratio processing technology. We experimentally demonstrate multiple meta-devices with highly customized dispersion engineering in the microwave regime, including broadband achromatic diffraction-limited meta-devices with NA=0.98 and 60% fractional bandwidth. Our proposed platform explores a paradigm for dispersion control with metasurfaces, which may facilitate advanced and scalable dispersion functionalities. △ Less

Submitted 3 April, 2025; originally announced April 2025.

Cat-Eye Inspired Active-Passive-Composite Aperture-Shared Sub-Terahertz Meta-Imager for Non-Interactive Concealed Object Detection

Authors: Mingshuang Hu, Yuzhong Wang, Zhe Jiang, Cheng Pang, Ying Li, Zhenyu Shao, Ziang Yue, Yiding Liu, Zeming Kong, Pengcheng Wang, Yifei Wang, Axiang Yu, Yinghan Wang, Wenzhi Li, Yongkang Dong, Yayun Cheng, Jiaran Qi

Abstract: Within the feline eye, a distinctive tapetum lucidum as a mirror resides posterior to the retina, reflecting the incident rays to simulate light source emission. This secondary emission property enables felines to be highly sensitive to light, possessing remarkable visual capabilities even in dark settings. Drawing inspiration from this natural phenomenon, we propose an active-passive-composite su… ▽ More Within the feline eye, a distinctive tapetum lucidum as a mirror resides posterior to the retina, reflecting the incident rays to simulate light source emission. This secondary emission property enables felines to be highly sensitive to light, possessing remarkable visual capabilities even in dark settings. Drawing inspiration from this natural phenomenon, we propose an active-passive-composite sub-terahertz meta-imager integrated with a bifocus metasurface, a high-sensitivity radiometer, and a low-power signal hidden radiation source. Benefiting from its aperture-shared advantage, this advanced fusion imaging system, enabled to be deployed by a simplified portable hardware platform, allows for the concurrent acquisition of active and passive electromagnetic properties to extend the target detection category and realize multi-mode fusion perception. Notably, it also enables the extraction of radiation and reflection characteristics without additional calibration modules. Experiments demonstrate the multi-target fusion imaging and localized information decoupling with the tailored field of view and emission energy. This compact and multi-mode fusion imaging system may have plenty of potential for airplane navigation positioning, abnormal monitoring, and non-interactive concealed security checks. △ Less

Submitted 2 April, 2025; originally announced April 2025.

Positronium Imaging: History, Current Status, and Future Perspectives

Authors: Paweł Moskal, Aleksander Bilewicz, Manish Das, Bangyan Huang, Aleksander Khreptak, Szymon Parzych, Jinyi Qi, Axel Rominger, Robert Seifert, Sushil Sharma, Kuangyu Shi, William Steinberger, Rafał Walczak, Ewa Stępień

Abstract: Positronium imaging was recently proposed to image the properties of positronium atoms in the patient body. Positronium properties depend on the size of intramolecular voids and oxygen concentration; therefore, they deliver information different and complementary to the anatomic, morphological, and metabolic images. Thus far, the mean ortho-positronium lifetime imaging has been at the center of re… ▽ More Positronium imaging was recently proposed to image the properties of positronium atoms in the patient body. Positronium properties depend on the size of intramolecular voids and oxygen concentration; therefore, they deliver information different and complementary to the anatomic, morphological, and metabolic images. Thus far, the mean ortho-positronium lifetime imaging has been at the center of research interest. The first ex vivo and in vivo positronium lifetime images of humans have been demonstrated with the dedicated J-PET scanner enabling simultaneous registration of annihilation photons and prompt gamma from ${β^{+} γ}$ emitters. Annihilation photons are used to reconstruct the annihilation place and time while prompt gamma is used to reconstruct the time of positronium formation. This review describes recent achievements in the translation of positronium imaging into clinics. The first measurements of positronium lifetime in humans with commercial PET scanners modernized to register triple coincidences are reported. The in vivo observations of differences in ortho-positronium lifetime between tumor and healthy tissues and between different oxygen concentrations are discussed. So far, the positronium lifetime measurements in humans were completed with clinically available ${^{68}\text{Ga}}$, ${^{82}\text{Rb}}$, and ${^{124}\text{I}}$ radionuclides. Status and challenges in developing positronium imaging on a way to a clinically useful procedure are presented and discussed. △ Less

Submitted 1 July, 2025; v1 submitted 18 March, 2025; originally announced March 2025.

Comments: This manuscript has been approved for publication and is available in Early Access in IEEE Transactions on Radiation and Plasma Medical Sciences

An artificially intelligent magnetic resonance spectroscopy quantification method: Comparison between QNet and LCModel on the cloud computing platform CloudBrain-MRS

Authors: Meijin Lin, Lin Guo, Dicheng Chen, Jianshu Chen, Zhangren Tu, Xu Huang, Jianhua Wang, Ji Qi, Yuan Long, Zhiguo Huang, Di Guo, Xiaobo Qu, Haiwei Han

Abstract: Objctives: This work aimed to statistically compare the metabolite quantification of human brain magnetic resonance spectroscopy (MRS) between the deep learning method QNet and the classical method LCModel through an easy-to-use intelligent cloud computing platform CloudBrain-MRS. Materials and Methods: In this retrospective study, two 3 T MRI scanners Philips Ingenia and Achieva collected 61 and… ▽ More Objctives: This work aimed to statistically compare the metabolite quantification of human brain magnetic resonance spectroscopy (MRS) between the deep learning method QNet and the classical method LCModel through an easy-to-use intelligent cloud computing platform CloudBrain-MRS. Materials and Methods: In this retrospective study, two 3 T MRI scanners Philips Ingenia and Achieva collected 61 and 46 in vivo 1H magnetic resonance (MR) spectra of healthy participants, respectively, from the brain region of pregenual anterior cingulate cortex from September to October 2021. The analyses of Bland-Altman, Pearson correlation and reasonability were performed to assess the degree of agreement, linear correlation and reasonability between the two quantification methods. Results: Fifteen healthy volunteers (12 females and 3 males, age range: 21-35 years, mean age/standard deviation = 27.4/3.9 years) were recruited. The analyses of Bland-Altman, Pearson correlation and reasonability showed high to good consistency and very strong to moderate correlation between the two methods for quantification of total N-acetylaspartate (tNAA), total choline (tCho), and inositol (Ins) (relative half interval of limits of agreement = 3.04%, 9.3%, and 18.5%, respectively; Pearson correlation coefficient r = 0.775, 0.927, and 0.469, respectively). In addition, quantification results of QNet are more likely to be closer to the previous reported average values than those of LCModel. Conclusion: There were high or good degrees of consistency between the quantification results of QNet and LCModel for tNAA, tCho, and Ins, and QNet generally has more reasonable quantification than LCModel. △ Less

Submitted 6 March, 2025; originally announced March 2025.

A Foundational Potential Energy Surface Dataset for Materials

Authors: Aaron D. Kaplan, Runze Liu, Ji Qi, Tsz Wai Ko, Bowen Deng, Janosh Riebesell, Gerbrand Ceder, Kristin A. Persson, Shyue Ping Ong

Abstract: Accurate potential energy surface (PES) descriptions are essential for atomistic simulations of materials. Universal machine learning interatomic potentials (UMLIPs)$^{1-3}$ offer a computationally efficient alternative to density functional theory (DFT)$^4$ for PES modeling across the periodic table. However, their accuracy today is fundamentally constrained due to a reliance on DFT relaxation da… ▽ More Accurate potential energy surface (PES) descriptions are essential for atomistic simulations of materials. Universal machine learning interatomic potentials (UMLIPs)$^{1-3}$ offer a computationally efficient alternative to density functional theory (DFT)$^4$ for PES modeling across the periodic table. However, their accuracy today is fundamentally constrained due to a reliance on DFT relaxation data.$^{5,6}$ Here, we introduce MatPES, a foundational PES dataset comprising $\sim 400,000$ structures carefully sampled from 281 million molecular dynamics snapshots that span 16 billion atomic environments. We demonstrate that UMLIPs trained on the modestly sized MatPES dataset can rival, or even outperform, prior models trained on much larger datasets across a broad range of equilibrium, near-equilibrium, and molecular dynamics property benchmarks. We also introduce the first high-fidelity PES dataset based on the revised regularized strongly constrained and appropriately normed (r$^2$SCAN) functional$^7$ with greatly improved descriptions of interatomic bonding. The open source MatPES initiative emphasizes the importance of data quality over quantity in materials science and enables broad community-driven advancements toward more reliable, generalizable, and efficient UMLIPs for large-scale materials discovery and design. △ Less

Submitted 5 March, 2025; originally announced March 2025.

Comments: The first three listed authors contributed equally to this work. For training data, see http://matpes.ai or https://materialsproject-contribs.s3.amazonaws.com/index.html#MatPES_2025_1/

Materials Graph Library (MatGL), an open-source graph deep learning library for materials science and chemistry

Authors: Tsz Wai Ko, Bowen Deng, Marcel Nassar, Luis Barroso-Luque, Runze Liu, Ji Qi, Elliott Liu, Gerbrand Ceder, Santiago Miret, Shyue Ping Ong

Abstract: Graph deep learning models, which incorporate a natural inductive bias for a collection of atoms, are of immense interest in materials science and chemistry. Here, we introduce the Materials Graph Library (MatGL), an open-source graph deep learning library for materials science and chemistry. Built on top of the popular Deep Graph Library (DGL) and Python Materials Genomics (Pymatgen) packages, ou… ▽ More Graph deep learning models, which incorporate a natural inductive bias for a collection of atoms, are of immense interest in materials science and chemistry. Here, we introduce the Materials Graph Library (MatGL), an open-source graph deep learning library for materials science and chemistry. Built on top of the popular Deep Graph Library (DGL) and Python Materials Genomics (Pymatgen) packages, our intention is for MatGL to be an extensible ``batteries-included'' library for the development of advanced graph deep learning models for materials property predictions and interatomic potentials. At present, MatGL has efficient implementations for both invariant and equivariant graph deep learning models, including the Materials 3-body Graph Network (M3GNet), MatErials Graph Network (MEGNet), Crystal Hamiltonian Graph Network (CHGNet), TensorNet and SO3Net architectures. MatGL also includes a variety of pre-trained universal interatomic potentials (aka ``foundational materials models (FMM)'') and property prediction models are also included for out-of-box usage, benchmarking and fine-tuning. Finally, MatGL includes support for Pytorch Lightning for rapid training of models. △ Less

Submitted 5 March, 2025; originally announced March 2025.

Comments: 50 pages, 13 figures including Manuscript and Supplementary Inoformation

WIMP Dark Matter Search using a 3.1 Tonne-Year Exposure of the XENONnT Experiment

Authors: E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, S. R. Armbruster, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, C. Cai, C. Capelli, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad , et al. (153 additional authors not shown)

Abstract: We report on a search for weakly interacting massive particle (WIMP) dark matter (DM) via elastic DM-xenon-nucleus interactions in the XENONnT experiment. We combine datasets from the first and second science campaigns resulting in a total exposure of 3.1 tonne-years. In a blind analysis of nuclear recoil events with energies above $3.8\,\mathrm{keV_{NR}}$, we find no significant excess above back… ▽ More We report on a search for weakly interacting massive particle (WIMP) dark matter (DM) via elastic DM-xenon-nucleus interactions in the XENONnT experiment. We combine datasets from the first and second science campaigns resulting in a total exposure of 3.1 tonne-years. In a blind analysis of nuclear recoil events with energies above $3.8\,\mathrm{keV_{NR}}$, we find no significant excess above background. We set new upper limits on the spin-independent WIMP-nucleon scattering cross section for WIMP masses above $10\,\mathrm{GeV}/c^2$ with a minimum of $1.7\,\times\,10^{-47}\,\mathrm{cm^2}$ at $90\,\%$ confidence level for a WIMP mass of $30\,\mathrm{GeV}/c^2$. We achieve a best median sensitivity of $1.4\,\times\,10^{-47}\,\mathrm{cm^2}$ for a $41\,\mathrm{GeV}/c^2$ WIMP. Compared to the result from the first XENONnT science dataset, we improve our sensitivity by a factor of up to 1.8. △ Less

Submitted 16 December, 2025; v1 submitted 25 February, 2025; originally announced February 2025.

Comments: Limits are included in the submission file

Journal ref: Phys. Rev. Lett. 135, 221003 (2025)

Quantum Emitters in Rhombohedral Boron Nitride

Authors: Angus Gale, Mehran Kianinia, Jake Horder, Connor Tweedie, Mridul Singhal, Dominic Scognamiglio, Jiajie Qi, Kaihui Li, Carla Verdi, Igor Aharonovich, Milos Toth

Abstract: Rhombohedral boron nitride (rBN) is an emerging wide-bandgap van der Waals (vdW) material that combines strong second-order nonlinear optical properties with the structural flexibility of layered 2D systems. Here we show that rBN hosts optically-addressable spin defects and single-photon emitters (SPEs). Both are fabricated deterministically, using site-specific techniques, and are compared to the… ▽ More Rhombohedral boron nitride (rBN) is an emerging wide-bandgap van der Waals (vdW) material that combines strong second-order nonlinear optical properties with the structural flexibility of layered 2D systems. Here we show that rBN hosts optically-addressable spin defects and single-photon emitters (SPEs). Both are fabricated deterministically, using site-specific techniques, and are compared to their analogues in hexagonal boron nitride (hBN). Emission spectra in hBN and rBN are compared, and computational models of defects in hBN and rBN are used to elucidate the debated atomic structure of the B-center SPE in BN. Our results establish rBN as a monolithic vdW platform that uniquely combines second-order nonlinear optical properties, optically addressable spin defects, and high-quality SPEs, opening new possibilities for integrated quantum and nonlinear photonics. △ Less

Submitted 20 February, 2025; originally announced February 2025.

Radon Removal in XENONnT down to the Solar Neutrino Level

Authors: E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, C. Cai, C. Capelli, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad, J. J. Cuenca-García , et al. (147 additional authors not shown)

Abstract: The XENONnT experiment has achieved an exceptionally low $^\text{222}$Rn activity concentration within its inner 5.9$\,$tonne liquid xenon detector of (0.90$\,\pm\,$0.01$\,$stat.$\,\pm\,$0.07 sys.)$\,μ$Bq/kg, equivalent to about 430 $^\text{222}$Rn atoms per tonne of xenon. This was achieved by active online radon removal via cryogenic distillation after stringent material selection. The achieved… ▽ More The XENONnT experiment has achieved an exceptionally low $^\text{222}$Rn activity concentration within its inner 5.9$\,$tonne liquid xenon detector of (0.90$\,\pm\,$0.01$\,$stat.$\,\pm\,$0.07 sys.)$\,μ$Bq/kg, equivalent to about 430 $^\text{222}$Rn atoms per tonne of xenon. This was achieved by active online radon removal via cryogenic distillation after stringent material selection. The achieved $^\text{222}$Rn activity concentration is five times lower than that in other currently operational multi-tonne liquid xenon detectors engaged in dark matter searches. This breakthrough enables the pursuit of various rare event searches that lie beyond the confines of the standard model of particle physics, with world-leading sensitivity. The ultra-low $^\text{222}$Rn levels have diminished the radon-induced background rate in the detector to a point where it is for the first time comparable to the solar neutrino-induced background, which is poised to become the primary irreducible background in liquid xenon-based detectors. △ Less

Submitted 25 April, 2025; v1 submitted 6 February, 2025; originally announced February 2025.

A wideband amplifying and filtering reconfigurable intelligent surface for wireless relay

Authors: Lijie Wu, Qun Yan Zhou, Jun Yan Dai, Siran Wang, Junwei Zhang, Zhen Jie Qi, Hanqing Yang, Ruizhe Jiang, Zheng Xing Wang, Huidong Li, Zhen Zhang, Jiang Luo, Qiang Cheng, Tie Jun Cui

Abstract: Programmable metasurfaces have garnered significant attention due to their exceptional ability to manipulate electromagnetic (EM) waves in real time, leading to the emergence of a prominent area in wireless communication, namely reconfigurable intelligent surfaces (RISs), to control the signal propagation and coverage. However, the existing RISs usually suffer from limited operating distance and b… ▽ More Programmable metasurfaces have garnered significant attention due to their exceptional ability to manipulate electromagnetic (EM) waves in real time, leading to the emergence of a prominent area in wireless communication, namely reconfigurable intelligent surfaces (RISs), to control the signal propagation and coverage. However, the existing RISs usually suffer from limited operating distance and band interference, which hinder their practical applications in wireless relay and communication systems. To overcome the limitations, we propose an amplifying and filtering RIS (AF-RIS) to enhance the in-band signal energy and filter the out-of-band signal of the incident EM waves, ensuring the miniaturization of the RIS array and enabling its anti-interference ability. In addition, each AF-RIS element is equipped with a 2-bit phase control capability, further endowing the entire array with great beamforming performance. An elaborately designed 4*8 AF-RIS array is presented by integrating the power dividing and combining networks, which substantially reduces the number of amplifiers and filters, thereby reducing the hardware costs and power consumption. Experimental results showcase the powerful capabilities of AF-RIS in beam-steering, frequency selectivity, and signal amplification. Therefore, the proposed AF-RIS holds significant promise for critical applications in wireless relay systems by offering an efficient solution to improve frequency selectivity, enhance signal coverage, and reduce hardware size. △ Less

Submitted 31 December, 2024; originally announced January 2025.

Low-Energy Nuclear Recoil Calibration of XENONnT with a $^{88}$YBe Photoneutron Source

Authors: XENON Collaboration, E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, C. Cai, C. Capelli, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad , et al. (147 additional authors not shown)

Abstract: Characterizing low-energy, keV-range nuclear recoils near the detector threshold is one of the major challenges for large direct dark matter detectors. To that end, we have successfully used a Yttrium-Beryllium photoneutron source that emits 152 keV neutrons for the calibration of the light and charge yields of the XENONnT experiment for the first time. After data selection, we accumulated 474 eve… ▽ More Characterizing low-energy, keV-range nuclear recoils near the detector threshold is one of the major challenges for large direct dark matter detectors. To that end, we have successfully used a Yttrium-Beryllium photoneutron source that emits 152 keV neutrons for the calibration of the light and charge yields of the XENONnT experiment for the first time. After data selection, we accumulated 474 events from 183 hours of exposure with this source. The expected background was $55 \pm 12$ accidental coincidence events, estimated using a dedicated 152 hour background calibration run with a Yttrium-PVC gamma-only source and data-driven modeling. From these calibrations, we extracted the light (charge) yield for liquid xenon at our field strength of 23 V/cm between 0.3 (0.7) keV$_{\rm NR}$ and 5.0 keV$_{\rm NR}$. This calibration is crucial for accurately measuring the solar $^8$B neutrino coherent elastic neutrino-nucleus scattering and searching for light dark matter particles with masses below 12 GeV/c$^2$. △ Less

Submitted 30 April, 2026; v1 submitted 11 December, 2024; originally announced December 2024.

The neutron veto of the XENONnT experiment: Results with demineralized water

Authors: XENON Collaboration, E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, C. Cai, C. Capelli, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad , et al. (145 additional authors not shown)

Abstract: Radiogenic neutrons emitted by detector materials are one of the most challenging backgrounds for the direct search of dark matter in the form of weakly interacting massive particles (WIMPs). To mitigate this background, the XENONnT experiment is equipped with a novel gadolinium-doped water Cherenkov detector, which encloses the xenon dual-phase time projection chamber (TPC). The neutron veto (NV)… ▽ More Radiogenic neutrons emitted by detector materials are one of the most challenging backgrounds for the direct search of dark matter in the form of weakly interacting massive particles (WIMPs). To mitigate this background, the XENONnT experiment is equipped with a novel gadolinium-doped water Cherenkov detector, which encloses the xenon dual-phase time projection chamber (TPC). The neutron veto (NV) tags neutrons via their capture on gadolinium or hydrogen, which release $γ$-rays that are subsequently detected as Cherenkov light. In this work, we present the key features and the first results of the XENONnT NV when operated with demineralized water in the initial phase of the experiment. Its efficiency for detecting neutrons is $(82\pm 1)\,\%$, the highest neutron detection efficiency achieved in a water Cherenkov detector. This enables a high efficiency of $(53\pm 3)\,\%$ for the tagging of WIMP-like neutron signals, inside a tagging time window of $250\,\mathrm{μs}$ between TPC and NV, leading to a livetime loss of $1.6\,\%$ during the first science run of XENONnT. △ Less

Submitted 18 December, 2024; v1 submitted 6 December, 2024; originally announced December 2024.

Journal ref: Eur. Phys. J. C 85, 695 (2025)

Multiple-partition cross-modulation programmable metasurface empowering wireless communications

Authors: Jun Wei Zhang, Zhen Jie Qi, Li Jie Wu, Wan Wan Cao, Xinxin Gao, Zhi Hui Fu, Jing Yu Chen, Jie Ming Lv, Zheng Xing Wang, Si Ran Wang, Jun Wei Wu, Zhen Zhang, Jia Nan Zhang, Hui Dong Li, Jun Yan Dai, Qiang Cheng, Tie Jun Cui

Abstract: With the versatile manipulation capability, programmable metasurfaces are rapidly advancing in their intelligence, integration, and commercialization levels. However, as the programmable metasurfaces scale up, their control configuration becomes increasingly complicated, posing significant challenges and limitations. Here, we propose a multiple-partition cross-modulation (MPCM) programmable metasu… ▽ More With the versatile manipulation capability, programmable metasurfaces are rapidly advancing in their intelligence, integration, and commercialization levels. However, as the programmable metasurfaces scale up, their control configuration becomes increasingly complicated, posing significant challenges and limitations. Here, we propose a multiple-partition cross-modulation (MPCM) programmable metasurface to enhance the wireless communication coverage with low hardware complexity. We firstly propose an innovative encoding scheme to multiply the control voltage vectors of row-column crossing, achieving high beamforming precision in free space while maintaining low control hardware complexity and reducing memory requirements for coding sequences. We then design and fabricate an MPCM programmable metasurface to confirm the effectiveness of the proposed encoding scheme. The simulated and experimental results show good agreements with the theoretically calculated outcomes in beam scanning across the E and H planes and in free-space beam pointing. The MPCM programmable metasurface offers strong flexibility and low complexity by allowing various numbers and combinations of partition items in modulation methods, catering to diverse precision demands in various scenarios. We demonstrate the performance of MPCM programmable metasurface in a realistic indoor setting, where the transmissions of videos to specific receiver positions are successfully achieved, surpassing the capabilities of traditional programmable metasurfaces. We believe that the proposed programmable metasurface has great potentials in significantly empowering the wireless communications while addressing the challenges associated with the programmable metasurface's design and implementation. △ Less

Submitted 8 November, 2024; originally announced November 2024.

Neutrinoless Double Beta Decay Sensitivity of the XLZD Rare Event Observatory

Authors: XLZD Collaboration, J. Aalbers, K. Abe, M. Adrover, S. Ahmed Maouloud, D. S. Akerib, A. K. Al Musalhi, F. Alder, L. Althueser, D. W. P. Amaral, C. S. Amarasinghe, A. Ames, B. Andrieu, N. Angelides, E. Angelino, B. Antunovic, E. Aprile, H. M. Araújo, J. E. Armstrong, M. Arthurs, M. Babicz, D. Bajpai, A. Baker, M. Balzer, J. Bang , et al. (419 additional authors not shown)

Abstract: The XLZD collaboration is developing a two-phase xenon time projection chamber with an active mass of 60 to 80 t capable of probing the remaining WIMP-nucleon interaction parameter space down to the so-called neutrino fog. In this work we show that, based on the performance of currently operating detectors using the same technology and a realistic reduction of radioactivity in detector materials,… ▽ More The XLZD collaboration is developing a two-phase xenon time projection chamber with an active mass of 60 to 80 t capable of probing the remaining WIMP-nucleon interaction parameter space down to the so-called neutrino fog. In this work we show that, based on the performance of currently operating detectors using the same technology and a realistic reduction of radioactivity in detector materials, such an experiment will also be able to competitively search for neutrinoless double beta decay in $^{136}$Xe using a natural-abundance xenon target. XLZD can reach a 3$σ$ discovery potential half-life of 5.7$\times$10$^{27}$ yr (and a 90% CL exclusion of 1.3$\times$10$^{28}$ yr) with 10 years of data taking, corresponding to a Majorana mass range of 7.3-31.3 meV (4.8-20.5 meV). XLZD will thus exclude the inverted neutrino mass ordering parameter space and will start to probe the normal ordering region for most of the nuclear matrix elements commonly considered by the community. △ Less

Submitted 30 April, 2025; v1 submitted 23 October, 2024; originally announced October 2024.

Comments: 29 pages, 7 figures

Journal ref: J. Phys. G: Nucl. Part. Phys. 52 (2025) 045102

The XLZD Design Book: Towards the Next-Generation Liquid Xenon Observatory for Dark Matter and Neutrino Physics

Authors: XLZD Collaboration, J. Aalbers, K. Abe, M. Adrover, S. Ahmed Maouloud, D. S. Akerib, A. K. Al Musalhi, F. Alder, L. Althueser, D. W. P. Amaral, C. S. Amarasinghe, A. Ames, B. Andrieu, N. Angelides, E. Angelino, B. Antunovic, E. Aprile, H. M. Araújo, J. E. Armstrong, M. Arthurs, M. Babicz, A. Baker, M. Balzer, J. Bang, E. Barberio , et al. (419 additional authors not shown)

Abstract: This report describes the experimental strategy and technologies for XLZD, the next-generation xenon observatory sensitive to dark matter and neutrino physics. In the baseline design, the detector will have an active liquid xenon target of 60 tonnes, which could be increased to 80 tonnes if the market conditions for xenon are favorable. It is based on the mature liquid xenon time projection chambe… ▽ More This report describes the experimental strategy and technologies for XLZD, the next-generation xenon observatory sensitive to dark matter and neutrino physics. In the baseline design, the detector will have an active liquid xenon target of 60 tonnes, which could be increased to 80 tonnes if the market conditions for xenon are favorable. It is based on the mature liquid xenon time projection chamber technology used in current-generation experiments, LZ and XENONnT. The report discusses the baseline design and opportunities for further optimization of the individual detector components. The experiment envisaged here has the capability to explore parameter space for Weakly Interacting Massive Particle (WIMP) dark matter down to the neutrino fog, with a 3$σ$ evidence potential for WIMP-nucleon cross sections as low as $3\times10^{-49}\rm\,cm^2$ (at 40 GeV/c$^2$ WIMP mass). The observatory will also have leading sensitivity to a wide range of alternative dark matter models. It is projected to have a 3$σ$ observation potential of neutrinoless double beta decay of $^{136}$Xe at a half-life of up to $5.7\times 10^{27}$ years. Additionally, it is sensitive to astrophysical neutrinos from the sun and galactic supernovae. △ Less

Submitted 28 October, 2025; v1 submitted 22 October, 2024; originally announced October 2024.

Comments: 33 pages, 14 figures

Journal ref: Eur. Phys. J. C (2025) 85: 1192

Simplified radar architecture based on information metasurface

Authors: Si Ran Wang, Zhan Ye Chen, Shao Nan Chen, Jun Yan Dai, Jun Wei Zhang, Zhen Jie Qi, Li Jie Wu, Meng Ke Sun, Qun Yan Zhou, Hui Dong Li, Zhang Jie Luo, Qiang Cheng, Tie Jun Cui

Abstract: Modern radar typically employs a chain architecture that consists of radio-frequency (RF) and intermediate frequency (IF) units, baseband digital signal processor, and information display. However, this architecture often results in high costs, significant hardware demands, and integration challenges. Here we propose a simplified radar architecture based on space-time-coding (STC) information meta… ▽ More Modern radar typically employs a chain architecture that consists of radio-frequency (RF) and intermediate frequency (IF) units, baseband digital signal processor, and information display. However, this architecture often results in high costs, significant hardware demands, and integration challenges. Here we propose a simplified radar architecture based on space-time-coding (STC) information metasurfaces. With their powerful capabilities to generate multiple harmonic frequencies and customize their phases, the STC metasurfaces play a key role in chirp signal generation, transmission, and echo reception. Remarkably, the receiving STC metasurface can implement dechirp processing directly on the RF level and realize the digital information outputs, which are beneficial to lower the hardware requirement at the receiving end while potentially shortening the time needed for conventional digital processing. As a proof of concept, the proposed metasurface radar is tested in a series of experiments for target detection and range/speed measurement, yielding results comparable to those obtained by conventional methods. This study provides valuable inspiration for a new radar system paradigm to combine the RF front ends and signal processors on the information metasurface platform that offers essential functionalities while significantly reducing the system complexity and cost. △ Less

Submitted 9 October, 2024; originally announced October 2024.

Comments: 25 pages, 10 figures

Model-independent searches of new physics in DARWIN with a semi-supervised deep learning pipeline

Authors: J. Aalbers, K. Abe, M. Adrover, S. Ahmed Maouloud, L. Althueser, D. W. P. Amaral, B. Andrieu, E. Angelino, D. Antón Martin, B. Antunovic, E. Aprile, M. Babicz, D. Bajpai, M. Balzer, E. Barberio, L. Baudis, M. Bazyk, N. F. Bell, L. Bellagamba, R. Biondi, Y. Biondi, A. Bismark, C. Boehm, K. Boese, R. Braun , et al. (209 additional authors not shown)

Abstract: We present a novel deep learning pipeline to perform a model-independent, likelihood-free search for anomalous (i.e., non-background) events in the proposed next generation multi-ton scale liquid Xenon-based direct detection experiment, DARWIN. We train an anomaly detector comprising a variational autoencoder and a classifier on extensive, high-dimensional simulated detector response data and cons… ▽ More We present a novel deep learning pipeline to perform a model-independent, likelihood-free search for anomalous (i.e., non-background) events in the proposed next generation multi-ton scale liquid Xenon-based direct detection experiment, DARWIN. We train an anomaly detector comprising a variational autoencoder and a classifier on extensive, high-dimensional simulated detector response data and construct a one-dimensional anomaly score optimised to reject the background only hypothesis in the presence of an excess of non-background-like events. We benchmark the procedure with a sensitivity study that determines its power to reject the background-only hypothesis in the presence of an injected WIMP dark matter signal, outperforming the classical, likelihood-based background rejection test. We show that our neural networks learn relevant energy features of the events from low-level, high-dimensional detector outputs, without the need to compress this data into lower-dimensional observables, thus reducing computational effort and information loss. For the future, our approach lays the foundation for an efficient end-to-end pipeline that eliminates the need for many of the corrections and cuts that are traditionally part of the analysis chain, with the potential of achieving higher accuracy and significant reduction of analysis time. △ Less

Submitted 9 May, 2026; v1 submitted 1 October, 2024; originally announced October 2024.

Comments: 10 Figures, 3 Tables, 23 Pages (incl. references. V2 Matching published version in EPJC

XENONnT Analysis: Signal Reconstruction, Calibration and Event Selection

Authors: XENON Collaboration, E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, J. R. Angevaare, D. Antón Martin, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad, J. J. Cuenca-García , et al. (143 additional authors not shown)

Abstract: The XENONnT experiment, located at the INFN Laboratori Nazionali del Gran Sasso, Italy, features a 5.9 tonne liquid xenon time projection chamber surrounded by an instrumented neutron veto, all of which is housed within a muon veto water tank. Due to extensive shielding and advanced purification to mitigate natural radioactivity, an exceptionally low background level of (15.8 $\pm$ 1.3) events/(to… ▽ More The XENONnT experiment, located at the INFN Laboratori Nazionali del Gran Sasso, Italy, features a 5.9 tonne liquid xenon time projection chamber surrounded by an instrumented neutron veto, all of which is housed within a muon veto water tank. Due to extensive shielding and advanced purification to mitigate natural radioactivity, an exceptionally low background level of (15.8 $\pm$ 1.3) events/(tonne$\cdot$year$\cdot$keV) in the (1, 30) keV region is reached in the inner part of the TPC. XENONnT is thus sensitive to a wide range of rare phenomena related to Dark Matter and Neutrino interactions, both within and beyond the Standard Model of particle physics, with a focus on the direct detection of Dark Matter in the form of weakly interacting massive particles (WIMPs). From May 2021 to December 2021, XENONnT accumulated data in rare-event search mode with a total exposure of one tonne $\cdot$ year. This paper provides a detailed description of the signal reconstruction methods, event selection procedure, and detector response calibration, as well as an overview of the detector performance in this time frame. This work establishes the foundational framework for the `blind analysis' methodology we are using when reporting XENONnT physics results. △ Less

Submitted 13 September, 2024; originally announced September 2024.

Comments: 27 pages, 23 figures

Effects of Mischmetal Composition and Cooling Rates on the Microstructure and Mechanical Properties of Al-(Ce, La, Nd) Eutectic Alloys

Authors: Jie Qi, Erin C. Bryan, David C. Dunand

Abstract: This study investigates the substitution of cerium (Ce) with mischmetal (MM) in cast Al-MM alloys, focusing on microstructure, hardness, tensile and compression properties, creep resistance, and coarsening resistance. Al-MM alloys with various MM compositions (Ce, Ce-50La, Ce-33La, and Ce-27La-19Nd, weight percent) exhibit near-eutectic and hyper-eutectic microstructures for Al-9MM and Al-12MM com… ▽ More This study investigates the substitution of cerium (Ce) with mischmetal (MM) in cast Al-MM alloys, focusing on microstructure, hardness, tensile and compression properties, creep resistance, and coarsening resistance. Al-MM alloys with various MM compositions (Ce, Ce-50La, Ce-33La, and Ce-27La-19Nd, weight percent) exhibit near-eutectic and hyper-eutectic microstructures for Al-9MM and Al-12MM compositions, respectively, with similar as-cast hardness (~525 MPa). All Al-9MM alloys show tensile yield stress ~55 MPa, ultimate tensile strength ~130 MPa, and fracture strain ~8%.The microstructural and mechanical properties consistency demonstrates the flexibility of MM compositions in Al-MM alloys. Al-9MM exhibits excellent coarsening resistance, with minimal hardness reduction when exposed to 300 and 350 C for up to 11 weeks, and a modest ~15% hardness reduction at 400 C for 8 weeks, outperforming eutectic Al-12.6Si and Al-6.4Ni alloys. Additionally, Al-9MM shows higher creep resistance at 300 C compared to most precipitate-strengthened Al-Sc-Zr and solid-solution-strengthened Al-Mg/Mn alloys, but is outperformed by eutectic-strengthened Al-6.4Ni and Al-10Ce-5Ni alloys.The effect of casting cooling rate is investigated through wedge casting: Al-9Ce transitions from hypo- to hyper-eutectic as cooling rates decrease, while Al-12Ce consistently shows hyper-eutectic microstructures. Al11Ce3 lamellae become finer and more closely spaced with increasing cooling rates. Al-9Ce maintains steady hardness at high to moderate cooling rates but shows reduced hardness at lower rates, whereas Al-12Ce shows no change in hardness.With a 15% reduction in energy consumption and CO2 emissions, Al-Ce alloys where Ce is replaced with MM offer comparable mechanical properties and enhanced environmental benefits, highlighting the potential of MM as a sustainable alternative. △ Less

Submitted 21 August, 2024; originally announced August 2024.

Comments: 21 pages, 9 figures, 2 tables

First Indication of Solar $^8$B Neutrinos via Coherent Elastic Neutrino-Nucleus Scattering with XENONnT

Authors: E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, C. Cai, C. Capelli, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad, J. J. Cuenca-García , et al. (142 additional authors not shown)

Abstract: We present the first measurement of nuclear recoils from solar $^8$B neutrinos via coherent elastic neutrino-nucleus scattering with the XENONnT dark matter experiment. The central detector of XENONnT is a low-background, two-phase time projection chamber with a 5.9 t sensitive liquid xenon target. A blind analysis with an exposure of 3.51 t$\times$yr resulted in 37 observed events above 0.5 keV,… ▽ More We present the first measurement of nuclear recoils from solar $^8$B neutrinos via coherent elastic neutrino-nucleus scattering with the XENONnT dark matter experiment. The central detector of XENONnT is a low-background, two-phase time projection chamber with a 5.9 t sensitive liquid xenon target. A blind analysis with an exposure of 3.51 t$\times$yr resulted in 37 observed events above 0.5 keV, with ($26.4^{+1.4}_{-1.3}$) events expected from backgrounds. The background-only hypothesis is rejected with a statistical significance of 2.73 $σ$. The measured $^8$B solar neutrino flux of $(4.7_{-2.3}^{+3.6})\times 10^6 \mathrm{cm}^{-2}\mathrm{s}^{-1}$ is consistent with results from the Sudbury Neutrino Observatory. The measured neutrino flux-weighted CE$ν$NS cross section on Xe of $(1.1^{+0.8}_{-0.5})\times10^{-39} \mathrm{cm}^2$ is consistent with the Standard Model prediction. This is the first direct measurement of nuclear recoils from solar neutrinos with a dark matter detector. △ Less

Submitted 23 November, 2024; v1 submitted 5 August, 2024; originally announced August 2024.

Journal ref: Phys. Rev. Lett. 133, 191002 (2024)

Feasibility of Liquid-phase Xenon Proportional Scintillation for Low-energy Physics

Authors: Jianyang Qi, Kaixuan Ni, Haiwen Xu, Yue Ma, Yuechen Liu

Abstract: Dual phase xenon time projection chambers (TPCs) detect both the scintillation photons and ionization electrons created by energy depositions within the liquid xenon (LXe) volume. The electrons are extracted from the interaction site through a gas gap, where they meet a high electric field where proportional scintillation occurs. This converts the electron signal into a light signal, and yields a… ▽ More Dual phase xenon time projection chambers (TPCs) detect both the scintillation photons and ionization electrons created by energy depositions within the liquid xenon (LXe) volume. The electrons are extracted from the interaction site through a gas gap, where they meet a high electric field where proportional scintillation occurs. This converts the electron signal into a light signal, and yields a high electron detection efficiency with a gain of tens of photoelectrons (PE) per electron. This technique of detecting both scintillation and ionization gives dual phase xenon TPCs the capability to distinguish between electronic and nuclear recoils, which is a key part of how these detectors are able to reach world-leading limits on Weakly Interacting Massive Particle (WIMP) dark matter. However, not all electrons can be extracted through the liquid-gas interface, and a constant millimeter-scale gas gap needs to be maintained, which may be a technological challenge if dual-phase xenon TPCs are to be scaled up for future dark matter searches. Furthermore, there is a background of single-electron peaks that follow a large ionization signal (S2) of unclear origin which may be due in part to the liquid-gas interface, and limits the sensitivity of these detectors towards low mass dark matter. In this paper, we demonstrate that a purely single-phase liquid xenon TPC which produces proportional scintillation directly in the liquid is still capable of discriminating between electronic and nuclear recoils, but that the background of single-electrons following an S2 is still likely unrelated to the liquid-gas interface. △ Less

Submitted 2 August, 2024; originally announced August 2024.

Comments: 14 pages, 27 figures, 4 page appendix

XENONnT WIMP Search: Signal & Background Modeling and Statistical Inference

Authors: XENON Collaboration, E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad, J. J. Cuenca-García, V. D'Andrea , et al. (139 additional authors not shown)

Abstract: The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 t… ▽ More The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 tonne-years (4.18 t fiducial mass) yielded no signal excess over background expectations, from which competitive exclusion limits were derived on WIMP-nucleon elastic scatter cross sections, for WIMP masses ranging from 6 GeV/$c^2$ up to the TeV/$c^2$ scale. This work details the modeling and statistical methods employed in this search. By means of calibration data, we model the detector response, which is then used to derive background and signal models. The construction and validation of these models is discussed, alongside additional purely data-driven backgrounds. We also describe the statistical inference framework, including the definition of the likelihood function and the construction of confidence intervals. △ Less

Submitted 3 June, 2025; v1 submitted 19 June, 2024; originally announced June 2024.

Comments: 21 pages, 11 figures

An integrated electro-optically tunable multi-channel interference cavity laser

Authors: Junxia Zhou, Yiran Zhu, Botao Fu, Jinming Chen, Huiting Song, Zhihao Zhang, Jianping Yu, Jian Liu, Min Wang, Jia Qi, Ya Cheng

Abstract: We demonstrated a continuously tunable laser system by butt coupling a reflective semiconductor optical amplifier (RSOA) chip with a thin-film lithium niobate (TFLN) based multi-channel interference (MCI) cavity chip. This hybrid integrated lasers allows for fine-tuning of the laser wavelength from 1538 nm to 1560 nm with a resolution of 0.014 nm and a side-mode suppression ratio (SMSR) exceeding… ▽ More We demonstrated a continuously tunable laser system by butt coupling a reflective semiconductor optical amplifier (RSOA) chip with a thin-film lithium niobate (TFLN) based multi-channel interference (MCI) cavity chip. This hybrid integrated lasers allows for fine-tuning of the laser wavelength from 1538 nm to 1560 nm with a resolution of 0.014 nm and a side-mode suppression ratio (SMSR) exceeding 30 dB. The MCI cavity chip is fabricated using the photolithography assisted chemo-mechanical etching (PLACE) technique. The developed laser has an output power of approximately 10 μW, which can be further amplified to 70 mW using a commercial erbium-doped fiber amplifier (EDFA) without significant broadening of the laser linewidth. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Compact low-half-wave-voltage thin film lithium niobate electro-optic phase modulator fabricated by photolithography assisted chemo-mechanical etching

Authors: Lang Gao, Youting Liang, Jinming Chen, Jianping Yu, Jia Qi, Lvbin Song, Jian Liu, Zhaoxiang Liu, Hongxin Qi, Ya Cheng

Abstract: This paper presents a compact dual-arm thin film lithium niobate (TFLN) electro-optic phase modulator fabricated using the photolithography-assisted chemo-mechanical etching (PLACE) technique. The design of the device allows for complete utilization of the microwave electric field, doubling the modulation efficiency compared to single-arm modulators in theory. With a half-wave voltage of approxima… ▽ More This paper presents a compact dual-arm thin film lithium niobate (TFLN) electro-optic phase modulator fabricated using the photolithography-assisted chemo-mechanical etching (PLACE) technique. The design of the device allows for complete utilization of the microwave electric field, doubling the modulation efficiency compared to single-arm modulators in theory. With a half-wave voltage of approximately 3 V and a modulation length of 1 cm, the device outperforms conventional phase modulators. Furthermore, the phase modulator exhibits low sensitivity to optical wavelengths in the range of 1510-1600 nm and offers a low insertion loss of 2.8 dB. The capability to generate multiple sideband signals for optical frequency comb applications is also demonstrated, producing 29 sideband signals at an input microwave power of 2 W. △ Less

Submitted 12 June, 2024; originally announced June 2024.

Superionic surface Li-ion transport in carbonaceous materials

Authors: Jianbin Zhou, Shen Wang, Chaoshan Wu, Ji Qi, Hongli Wan, Shen Lai, Shijie Feng, Tsz Wai Ko, Zhaohui Liang, Ke Zhou, Nimrod Harpak, Nick Solan, Mengchen Liu, Zeyu Hui, Paulina J. Ai, Kent Griffith, Chunsheng Wang, Shyue Ping Ong, Yan Yao, Ping Liu

Abstract: Unlike Li-ion transport in the bulk of carbonaceous materials, little is known about Li-ion diffusion on their surface. In this study, we have discovered an ultra-fast Li-ion transport phenomenon on the surface of carbonaceous materials, particularly when they have limited Li insertion capacity along with a high surface area. This is exemplified by a carbon black, Ketjen Black (KB). An ionic condu… ▽ More Unlike Li-ion transport in the bulk of carbonaceous materials, little is known about Li-ion diffusion on their surface. In this study, we have discovered an ultra-fast Li-ion transport phenomenon on the surface of carbonaceous materials, particularly when they have limited Li insertion capacity along with a high surface area. This is exemplified by a carbon black, Ketjen Black (KB). An ionic conductivity of 18.1 mS cm-1 at room temperature is observed, far exceeding most solid-state ion conductors. Theoretical calculations reveal a low diffusion barrier for the surface Li species. The species is also identified as Li*, which features a partial positive charge. As a result, lithiated KB functions effectively as an interlayer between Li and solid-state electrolytes (SSE) to mitigate dendrite growth and cell shorting. This function is found to be electrolyte agnostic, effective for both sulfide and halide SSEs. Further, lithiated KB can act as a high-performance mixed ion/electron conductor that is thermodynamically stable at potentials near Li metal. A graphite anode mixed with KB instead of a solid electrolyte demonstrates full utilization with a capacity retention of ~85% over 300 cycles. The discovery of this surface-mediated ultra-fast Li-ion transport mechanism provides new directions for the design of solid-state ion conductors and solid-state batteries. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Comments: 21 pages, 6 figures

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Offline tagging of radon-induced backgrounds in XENON1T and applicability to other liquid xenon detectors

Authors: E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, J. R. Angevaare, D. Antón Martin, F. Arneodo, L. Baudis, A. L. Baxter, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, E. J. Brookes, A. Brown, G. Bruno, R. Budnik, T. K. Bui, J. M. R. Cardoso, A. P. Cimental Chavez, A. P. Colijn, J. Conrad , et al. (142 additional authors not shown)

Abstract: This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity… ▽ More This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity field, $^{214}\text{Pb}$ background events can be tagged when they are followed by $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays, or preceded by $^{218}\text{Po}$ decays. This was achieved by evolving a point cloud in the direction of a measured convection velocity field, and searching for $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays or $^{218}\text{Po}$ decays within a volume defined by the point cloud. In XENON1T, this tagging system achieved a $^{214}\text{Pb}$ background reduction of $6.2^{+0.4}_{-0.9}\%$ with an exposure loss of $1.8\pm 0.2 \%$, despite the timescales of convection being smaller than the relevant decay times. We show that the performance can be improved in XENONnT, and that the performance of such a software-tagging approach can be expected to be further improved in a diffusion-limited scenario. Finally, a similar method might be useful to tag the cosmogenic $^{137}\text{Xe}$ background, which is relevant to the search for neutrinoless double-beta decay. △ Less

Submitted 19 June, 2024; v1 submitted 21 March, 2024; originally announced March 2024.

Comments: 17 pages, 19 figures

Journal ref: Phys.Rev.D 110 (2024) 012011

The XENONnT Dark Matter Experiment

Authors: XENON Collaboration, E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, J. R. Angevaare, V. C. Antochi, D. Antón Martin, F. Arneodo, M. Balata, L. Baudis, A. L. Baxter, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, E. J. Brookes, A. Brown, S. Bruenner, G. Bruno, R. Budnik, T. K. Bui , et al. (170 additional authors not shown)

Abstract: The multi-staged XENON program at INFN Laboratori Nazionali del Gran Sasso aims to detect dark matter with two-phase liquid xenon time projection chambers of increasing size and sensitivity. The XENONnT experiment is the latest detector in the program, planned to be an upgrade of its predecessor XENON1T. It features an active target of 5.9 tonnes of cryogenic liquid xenon (8.5 tonnes total mass in… ▽ More The multi-staged XENON program at INFN Laboratori Nazionali del Gran Sasso aims to detect dark matter with two-phase liquid xenon time projection chambers of increasing size and sensitivity. The XENONnT experiment is the latest detector in the program, planned to be an upgrade of its predecessor XENON1T. It features an active target of 5.9 tonnes of cryogenic liquid xenon (8.5 tonnes total mass in cryostat). The experiment is expected to extend the sensitivity to WIMP dark matter by more than an order of magnitude compared to XENON1T, thanks to the larger active mass and the significantly reduced background, improved by novel systems such as a radon removal plant and a neutron veto. This article describes the XENONnT experiment and its sub-systems in detail and reports on the detector performance during the first science run. △ Less

Submitted 13 August, 2025; v1 submitted 15 February, 2024; originally announced February 2024.

Comments: 32 pages, 20 figures; matches published version

Journal ref: Eur.Phys.J.C 84 (2024) 8, 784

Feasibility of PET-enabled dual-energy CT imaging: First physical phantom and initial patient results

Authors: Yansong Zhu, Siqi Li, Zhaoheng Xie, Edwin K. Leung, Reimund Bayerlein, Negar Omidvari, Yasser G. Abdelhafez, Simon R. Cherry, Jinyi Qi, Ramsey D. Badawi, Benjamin A. Spencer, Guobao Wang

Abstract: X-ray computed tomography (CT) in PET/CT is commonly operated with a single energy, resulting in a limitation of lacking tissue composition information. Dual-energy (DE) spectral CT enables material decomposition by using two different x-ray energies and may be combined with PET for improved multimodality imaging, but would either require hardware upgrade or increase radiation dose due to the adde… ▽ More X-ray computed tomography (CT) in PET/CT is commonly operated with a single energy, resulting in a limitation of lacking tissue composition information. Dual-energy (DE) spectral CT enables material decomposition by using two different x-ray energies and may be combined with PET for improved multimodality imaging, but would either require hardware upgrade or increase radiation dose due to the added second x-ray CT scan. Recently proposed PET-enabled DECT method allows dual-energy spectral imaging using a conventional PET/CT scanner without the need for a second x-ray CT scan. A gamma-ray CT (gCT) image at 511 keV can be generated from the existing time-of-flight PET data with the maximum-likelihood attenuation and activity (MLAA) approach and is then combined with the low-energy x-ray CT image to form dual-energy spectral imaging. To improve the image quality of gCT, a kernel MLAA method was further proposed by incorporating x-ray CT as a priori information. The concept of this PET-enabled DECT has been validated using simulation studies, but not yet with 3D real data. In this work, we developed a general open-source implementation for gCT reconstruction from PET data and use this implementation for the first real data validation with both a physical phantom study and a human subject study on a uEXPLORER total-body PET/CT system. These results have demonstrated the feasibility of this method for spectral imaging and material decomposition. △ Less

Submitted 19 November, 2024; v1 submitted 3 February, 2024; originally announced February 2024.

Comments: 20 pages, 7 figures

Thin Film Lithium Niobate Electro-optic Isolator Fabricated by photolithography assisted chemo-mechanical etching (PLACE)

Authors: Lang Gao, Youting Liang, Lvbin Song, Difeng Yin, Jia Qi, Jinming Chen, Zhaoxiang Liu, Jianping Yu, Jian Liu, Haisu Zhang, Zhiwei Fang, Hongxin Qi, Ya Cheng

Abstract: We report a thin-film lithium niobate electro-optic isolator fabricated by photolithography-assisted chemo-mechanical etching in this work. The device demonstrates 39.50 dB isolation when subjected to a 24 GHz microwave of 25.5 dBm on its electrodes. The measured isolation remains consistently above 30 dB within the 1510 nm to 1600 nm wavelength range. The overall device insertion loss, specifical… ▽ More We report a thin-film lithium niobate electro-optic isolator fabricated by photolithography-assisted chemo-mechanical etching in this work. The device demonstrates 39.50 dB isolation when subjected to a 24 GHz microwave of 25.5 dBm on its electrodes. The measured isolation remains consistently above 30 dB within the 1510 nm to 1600 nm wavelength range. The overall device insertion loss, specifically the fiber-to-fiber insert loss, has been measured to be 2.6 dB, which is attributed to our highly efficient spot size converter and the low propagation loss observed in the fabricated waveguides. △ Less

Submitted 20 November, 2023; originally announced November 2023.

Giant nonlinear optical wave mixing in van der Waals compound MnPSe3

Authors: Li Yue, Chang Liu, Shanshan Han, Hao Hong, Yijun Wang, Qiaomei Liu, Jiajie Qi, Yuan Li, Dong Wu, Kaihui Liu, Enge Wang, Tao Dong, Nanlin Wang

Abstract: Optical nonlinearities, one of the most fascinating properties of two-dimensional (2D) materials, are essential for exploring novel physics in 2D systems and developing next-generation nonlinear optical applications. While tremendous efforts have been made to discover and optimize second-order nonlinear optical responses in various 2D materials, higher odd-order nonlinear processes, which are in g… ▽ More Optical nonlinearities, one of the most fascinating properties of two-dimensional (2D) materials, are essential for exploring novel physics in 2D systems and developing next-generation nonlinear optical applications. While tremendous efforts have been made to discover and optimize second-order nonlinear optical responses in various 2D materials, higher odd-order nonlinear processes, which are in general much less efficient than second order ones, have been paid less attention despite their scientific and applicational significance. Here we report giant odd-order nonlinear optical wave mixing in a correlated van der Waals insulator MnPSe3 at room temperature. Illuminated by two near-infrared femtosecond lasers simultaneously, it generates a series of degenerate and non-degenerate four- and six-wave mixing outputs, with conversion efficiencies up to the order of $10^{-4}$ and $10^{-6}$ for the four- and six-wave mixing processes, respectively, far exceeding the efficiencies of several prototypical nonlinear optical materials (GaSe, LiNbO3). This work highlights the intriguing prospect of transition metal phosphorous trichalcogenides for future research of the nonlinear light matter interactions in 2D systems and for potential nonlinear photonic applications. △ Less

Submitted 28 September, 2023; originally announced October 2023.

Comments: 17 pages, 4 figures

Design and performance of the field cage for the XENONnT experiment

Authors: E. Aprile, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, J. R. Angevaare, V. C. Antochi, D. Antón Martin, F. Arneodo, L. Baudis, A. L. Baxter, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, E. J. Brookes, A. Brown, S. Bruenner, G. Bruno, R. Budnik, T. K. Bui, C. Cai, J. M. R. Cardoso, D. Cichon , et al. (139 additional authors not shown)

Abstract: The precision in reconstructing events detected in a dual-phase time projection chamber depends on an homogeneous and well understood electric field within the liquid target. In the XENONnT TPC the field homogeneity is achieved through a double-array field cage, consisting of two nested arrays of field shaping rings connected by an easily accessible resistor chain. Rather than being connected to t… ▽ More The precision in reconstructing events detected in a dual-phase time projection chamber depends on an homogeneous and well understood electric field within the liquid target. In the XENONnT TPC the field homogeneity is achieved through a double-array field cage, consisting of two nested arrays of field shaping rings connected by an easily accessible resistor chain. Rather than being connected to the gate electrode, the topmost field shaping ring is independently biased, adding a degree of freedom to tune the electric field during operation. Two-dimensional finite element simulations were used to optimize the field cage, as well as its operation. Simulation results were compared to ${}^{83m}\mathrm{Kr}$ calibration data. This comparison indicates an accumulation of charge on the panels of the TPC which is constant over time, as no evolution of the reconstructed position distribution of events is observed. The simulated electric field was then used to correct the charge signal for the field dependence of the charge yield. This correction resolves the inconsistent measurement of the drift electron lifetime when using different calibrations sources and different field cage tuning voltages. △ Less

Submitted 21 September, 2023; originally announced September 2023.

Journal ref: Eur. Phys. J. C 84, 138 (2024)