An assortment of Klipper extensions that I have made while working on Tapchanger
To install this plugin, run the installation script using the following command over SSH. This script will download this GitHub repository to your RaspberryPi home directory, and symlink the files in the Klipper extra folder.
wget -O - https://raw.githubusercontent.com/viesturz/klipper-toolchanger/main/install.sh | bash
Then, add the following to your moonraker.conf to enable automatic updates:
[update_manager klipper-toolchanger]
type: git_repo
channel: dev
path: ~/klipper-toolchanger
origin: https://github.com/viesturz/klipper-toolchanger.git
managed_services: klipper
primary_branch: main
Add the macros.cfg to your printer config.
- 2026.4.6 - Fix
abort_on_tool_missingmis-firing if there are waits during tool change. - 2026.2.15 - Bring back the adjust Z after nozzle homing.
- 2026.2.8
- Breaking change tool.detection_pin is inverted. Add/Remove the
!in pin definition when updating. - Simplify use of per-tool probe. Toolchanger can automatically detect active probe, see updated configuration example.
- Update tool probe for newest Klipper.
- Breaking change tool.detection_pin is inverted. Add/Remove the
- 2026.1.25 - Example script for camera tool alignment.
- 2025.12.26 - Breaking change Stop using Gcode offset for tool offsets. Uses a dedicated gcode transform instead.
- 2025.12.25 - Use Bezier curves for rounded paths.
- 2025.12.25 - Manual rail update to latest Klipper.
Note that if an update has new klipper files, they will not be automatically installed into Klipper. You will need to run the intall script manualy to add them:
bash ~/klipper-toolchanger/install.sh
- Toolchanger - tool management support.
- Tool probe - per tool Z probe.
- Rounded path - rounds the travel path corners for fast non-print moves.
- Tools calibrate - support for contact based XYZ offset calibration probes.