The official firmware for Meshtastic, an open-source, off-grid mesh communication system.
Wifi & BLE driven passenger flow metering with cheap ESP32 boards
Arduino source codes and toolchain for WiFi_Kit_series made by HelTecAutomation.
Hello World example code for the new Heltec WiFi LoRa 32 (V3) board with LoRa SX1262 chip
Sensor remoto y autónomo de ruido ambiental
Estación metereológica DIY con comunicaciones LoRaWAN TTN
LoRa APRS Tracker for Heltec Cubecell GPS Boards
MonsterMesh: a Game Boy emulator, Gen-1 monster-battling RPG, and WiFi/BLE 'Pentest Pikachu' security toy that run over the Meshtastic LoRa mesh — on LilyGO T-Deck, Raspberry Pi, and Heltec V3/V4/T114. No internet required.
LoRa APRS Digipeater based for ESP32
Official Mesh Dualboot. The approved boot selector for ESP32-S3 devices; pick between Official Mesh or the alternative firmware of your choice at power-on, no reflash.
It's an IoT DIY project which notifies you when you have received a parcel or a letter in your letterbox. This project uses an HelTec AB01 LoRaWAN module to send data over an LoRaWAN Gateway when WiFi is out of range. I use an Helium Gateway from the People's Network in order to forward packets over Helium Network which send data to AWS IoT Core…
This DIY project is a LoRaWAN Rain Gauge based on CubeCell HTCC AB01 development Board.
Sample LoRaWAN code for HELTEC WiFi LoRa V2 and V3 boards using PlatformIO
Gateway modulare ESP32-S3 (Heltec LoRa 32 V3/V4) che riceve sensori meteo 868 MHz (Fine Offset/Ecowitt, LaCrosse, Bresser) e li ritrasmette su Meshtastic, con OLED, grafici 24h e bollettini automatici.
nodemcu
Add a description, image, and links to the heltec topic page so that developers can more easily learn about it.
To associate your repository with the heltec topic, visit your repo's landing page and select "manage topics."