-
Effects of Parasitics and Interface Traps On Ballistic Nanowire FET In The Ultimate Quantum Capacitance Limit
Authors:
Kausik Majumdar,
Navakanta Bhat,
Prashant Majhi,
Raj Jammy
Abstract:
In this paper, we focus on the performance of a nanowire Field Effect Transistor (FET) in the Ultimate Quantum Capacitance Limit (UQCL) (where only one subband is occupied) in the presence of interface traps ($D_{it}$), parasitic capacitance ($C_L$) and source/drain series resistance ($R_{s,d}$) using a ballistic transport model and compare the performance with its Classical Capacitance Limit (CCL…
▽ More
In this paper, we focus on the performance of a nanowire Field Effect Transistor (FET) in the Ultimate Quantum Capacitance Limit (UQCL) (where only one subband is occupied) in the presence of interface traps ($D_{it}$), parasitic capacitance ($C_L$) and source/drain series resistance ($R_{s,d}$) using a ballistic transport model and compare the performance with its Classical Capacitance Limit (CCL) counterpart. We discuss four different aspects relevant to the present scenario, namely, (i) gate voltage dependent capacitance, (ii) saturation of the drain current, (iii) the subthreshold slope and (iv) the scaling performance. To gain physical insights into these effects, we also develop a set of semi-analytical equations. The key observations are: (1) A strongly energy-quantized nanowire shows non-monotonic multiple peak C-V characteristics due to discrete contributions from individual subbands; (2) The ballistic drain current saturates better in the UQCL compared to CCL, both in presence and absence of $D_{it}$ and $R_{s,d}$; (3) The subthreshold slope does not suffer any relative degradation in the UQCL compared to CCL, even with $D_{it}$ and $R_{s,d}$; (4) UQCL scaling outperforms CCL in the ideal condition; (5) UQCL scaling is more immune to $R_{s,d}$, but presence of $D_{it}$ and $C_L$ significantly degrades scaling advantages in the UQCL.
△ Less
Submitted 28 May, 2010;
originally announced May 2010.
-
HFinFET: A Scalable, High Performance, Low Leakage Hybrid N-Channel FET
Authors:
Kausik Majumdar,
Prashant Majhi,
Navakanta Bhat,
Raj Jammy
Abstract:
In this letter we propose the design and simulation study of a novel transistor, called HFinFET, which is a hybrid of a HEMT and a FinFET, to obtain excellent performance and good off state control. Followed by the description of the design, 3D device simulation has been performed to predict the characteristics of the device. The device has been benchmarked against published state of the art HEMT…
▽ More
In this letter we propose the design and simulation study of a novel transistor, called HFinFET, which is a hybrid of a HEMT and a FinFET, to obtain excellent performance and good off state control. Followed by the description of the design, 3D device simulation has been performed to predict the characteristics of the device. The device has been benchmarked against published state of the art HEMT as well as planar and non-planar Si NMOSFET data of comparable gate length using standard benchmarking techniques.
△ Less
Submitted 27 March, 2010;
originally announced March 2010.
-
Wafer-Scale, Sub-5 nm Junction Formation by Monolayer Doping and Conventional Spike Annealing
Authors:
Johnny C. Ho,
Roie Yerushalmi,
Gregory Smith,
Prashant Majhi,
Joseph Bennett,
Jeffri Halim,
Vladimir N. Faifer,
Ali Javey
Abstract:
We report the formation of sub-5 nm ultrashallow junctions in 4 inch Si wafers enabled by the molecular monolayer doping of phosphorous and boron atoms and the use of conventional spike annealing. The junctions are characterized by secondary ion mass spectrometry and non-contact sheet resistance measurements. It is found that the majority (~70%) of the incorporated dopants are electrically activ…
▽ More
We report the formation of sub-5 nm ultrashallow junctions in 4 inch Si wafers enabled by the molecular monolayer doping of phosphorous and boron atoms and the use of conventional spike annealing. The junctions are characterized by secondary ion mass spectrometry and non-contact sheet resistance measurements. It is found that the majority (~70%) of the incorporated dopants are electrically active, therefore, enabling a low sheet resistance for a given dopant areal dose. The wafer-scale uniformity is investigated and found to be limited by the temperature homogeneity of the spike anneal tool used in the experiments. Notably, minimal junction leakage currents (<1 uA/cm2) are observed which highlights the quality of the junctions formed by this process. The results clearly demonstrate the versatility and potency of the monolayer doping approach for enabling controlled, molecular-scale ultrashallow junction formation without introducing defects in the semiconductor.
△ Less
Submitted 10 January, 2009;
originally announced January 2009.