Influence of Critical Current Distribution on Operation, Quench Detection and Protection of HTS Pancake Coils
Authors:
Mariusz Wozniak,
Erik Schnaubelt,
Sina Atalay,
Bernardo Bordini,
Julien Dular,
Tim Mulder,
Emmanuele Ravaioli,
Arjan Verweij
Abstract:
High-temperature superconductor (HTS) coated conductors (CC) are often wound into pancake coils with electrical insulation in-between the turns. The copper terminals are used for current injection and conduction cooling. An inherent variation of the critical current along the CC length results from its manufacturing process. This variation causes non-uniform heat generation, particularly when the…
▽ More
High-temperature superconductor (HTS) coated conductors (CC) are often wound into pancake coils with electrical insulation in-between the turns. The copper terminals are used for current injection and conduction cooling. An inherent variation of the critical current along the CC length results from its manufacturing process. This variation causes non-uniform heat generation, particularly when the coil is operated at a high fraction of the nominal critical current or when large critical current defects are present. The temperature distribution resulting from the balance between cooling and heating, in combination with the magnetic field and critical current distributions, determines whether a thermal runaway occurs. Accurately predicting the level of critical current defects that can be tolerated during conduction-cooled operation is difficult and requires a 3D coupled electromagnetic and thermal simulation. This paper presents the results of simulations that are performed with the open-source Finite Element Quench Simulator (FiQuS) tool developed at CERN as part of the STEAM framework. The 3D coupled magnetodynamic-thermal simulations are based on the H-phi formulation and use thin shell approximations, a CC homogenization and conduction-cooling. The critical current (Ic) is varied along the CC length. The effect of a single defect specified as a reduction of Ic along the CC length is investigated in terms of the coil's ability to reach and maintain the operating conditions. The Ic and length of the defect that results in a thermal runaway are analyzed in terms of defect location. In addition, a classical 1D scenario with a quench heater is studied. Both the local defect and the heater cases are compared in terms of the voltage signal available for quench detection. These cases result in very different requirements for quench detection, and their implications are discussed.
△ Less
Submitted 27 November, 2024;
originally announced November 2024.
Optimizing Navigational Graph Queries
Authors:
Thomas Mulder,
George Fletcher,
Nikolay Yakovets
Abstract:
We study the optimization of navigational graph queries, i.e., queries which combine recursive and pattern-matching fragments. Current approaches to their evaluation are not effective in practice. Towards addressing this, we present a number of novel powerful optimization techniques which aim to constrain the intermediate results during query evaluation. We show how these techniques can be planned…
▽ More
We study the optimization of navigational graph queries, i.e., queries which combine recursive and pattern-matching fragments. Current approaches to their evaluation are not effective in practice. Towards addressing this, we present a number of novel powerful optimization techniques which aim to constrain the intermediate results during query evaluation. We show how these techniques can be planned effectively and executed efficiently towards the first practical evaluation solution for complex navigational queries on real-world workloads. Indeed, our experimental results show several orders of magnitude improvement in query evaluation performance over state-of-the-art techniques on a wide range of queries on diverse datasets.
△ Less
Submitted 20 May, 2026; v1 submitted 8 June, 2024;
originally announced June 2024.