-
Managing Industrial Communication Delays with Software-Defined Networking
Authors:
Rutvij H. Jhaveri,
Rui Tan,
Arvind Easwaran,
Sagar V. Ramani
Abstract:
Recent technological advances have fostered the development of complex industrial cyber-physical systems which demand real-time communication with delay guarantees. The consequences of delay requirement violation in such systems may become increasingly severe. In this paper, we propose a contract-based fault-resilient methodology which aims at managing the communication delays of real-time flows i…
▽ More
Recent technological advances have fostered the development of complex industrial cyber-physical systems which demand real-time communication with delay guarantees. The consequences of delay requirement violation in such systems may become increasingly severe. In this paper, we propose a contract-based fault-resilient methodology which aims at managing the communication delays of real-time flows in industries. With this objective, we present a light-weight mechanism to estimate end-to-end delay in the network in which the clocks of the switches are not synchronized. The mechanism aims at providing high level of accuracy with lower communication overhead. We then propose a contract-based framework using software-defined networking where the components are associated with delay contracts and a resilience manager. The proposed resilience management framework contains: (1) contracts which state guarantees about components behaviors, (2) observers which are responsible to detect contract failure (fault), (3) monitors to detect events such as run-time changes in the delay requirements and link failure, (4) control logic to take suitable decisions based on the type of the fault, (5) resilience manager to decide response strategies containing the best course of action as per the control logic decision. Finally, we present a delay-aware path finding algorithm which is used to route/reroute the real-time flows to provide resiliency in the case of faults and, to adapt to the changes in the network state. Performance of the proposed framework is evaluated with the Ryu SDN controller and Mininet network emulator.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Real-time QoS Routing Scheme in SDN-based Robotic Cyber-Physical Systems
Authors:
Rutvij H. Jhaveri,
Rui Tan,
Sagar V. Ramani
Abstract:
Industrial cyber-physical systems (CPS) have gained enormous attention of manufacturers in recent years due to their automation and cost reduction capabilities in the fourth industrial revolution (Industry 4.0). Such an industrial network of connected cyber and physical components may consist of highly expensive components such as robots. In order to provide efficient communication in such a netwo…
▽ More
Industrial cyber-physical systems (CPS) have gained enormous attention of manufacturers in recent years due to their automation and cost reduction capabilities in the fourth industrial revolution (Industry 4.0). Such an industrial network of connected cyber and physical components may consist of highly expensive components such as robots. In order to provide efficient communication in such a network, it is imperative to improve the Quality-of-Service (QoS). Software Defined Networking (SDN) has become a key technology in realizing QoS concepts in a dynamic fashion by allowing a centralized controller to program each flow with a unified interface. However, state-of-the-art solutions do not effectively use the centralized visibility of SDN to fulfill QoS requirements of such industrial networks. In this paper, we propose an SDN-based routing mechanism which attempts to improve QoS in robotic cyber-physical systems which have hard real-time requirements. We exploit the SDN capabilities to dynamically select paths based on current link parameters in order to improve the QoS in such delay-constrained networks. We verify the efficiency of the proposed approach on a realistic industrial OpenFlow topology. Our experiments reveal that the proposed approach significantly outperforms an existing delay-based routing mechanism in terms of average throughput, end-to-end delay and jitter. The proposed solution would prove to be significant for the industrial applications in robotic cyber-physical systems.
△ Less
Submitted 9 April, 2020;
originally announced April 2020.
-
Indoor Navigation on Google Maps and Indoor Localization Using RSS Fingerprinting
Authors:
Sagar V. Ramani,
Yagnik N. Tank
Abstract:
Contrasting to advances in street/outdoor navigation, wall mounted maps and signs continue to be the primary reference indoor navigation in hospitals, malls, museums, etc. The proliferation of mobile devices and the growing demand for location aware systems that filter information based on currently device location have led to an increase in research and product development in this field. An attem…
▽ More
Contrasting to advances in street/outdoor navigation, wall mounted maps and signs continue to be the primary reference indoor navigation in hospitals, malls, museums, etc. The proliferation of mobile devices and the growing demand for location aware systems that filter information based on currently device location have led to an increase in research and product development in this field. An attempt has been made to provide solution for indoor navigation on Google maps and to provide location of a user in a building using Wi-Fi signal strength on android Smartphone.
△ Less
Submitted 22 May, 2014;
originally announced May 2014.