-
Certification of the genuine resolution of photon number resolving detectors
Authors:
Jef Pauwels,
Towsif Taher,
Roope Uola,
Boris Korzh,
Nicolas Brunner,
Pavel Sekatski
Abstract:
Photon-number-resolving (PNR) detectors are essential components of photonic quantum technologies, yet thus far, no practical metric exists to certify how many photons they can genuinely resolve in a single measurement. Here we introduce an operational framework for quantifying the capability of a PNR detector to distinguish between different numbers of photons, i.e. its genuine resolution. In tur…
▽ More
Photon-number-resolving (PNR) detectors are essential components of photonic quantum technologies, yet thus far, no practical metric exists to certify how many photons they can genuinely resolve in a single measurement. Here we introduce an operational framework for quantifying the capability of a PNR detector to distinguish between different numbers of photons, i.e. its genuine resolution. In turn, we develop a practical and scalable protocol for certifying the genuine resolution of a detector, which is based on coherent state probes. We apply the method to a 28-pixel photon-number-resolving superconducting nanowire single-photon detector (PNR-SNSPD) and certify genuine four-outcome resolution. Our work highlights the critical requirements in terms of detector efficiency towards achieving high genuine resolution. This approach provides an operational benchmark for PNR detectors and fills a crucial gap in the characterization of photonic quantum devices.
△ Less
Submitted 12 June, 2026;
originally announced June 2026.
-
Electrical thermography via centimetre-scale fiber-based distributed temperature sensing
Authors:
Victor Cochet,
Axel Faccio,
Georgios Stoikos,
Towsif Taher,
Rob Thew,
Jérôme Extermann,
Enrico Pomarico
Abstract:
We present a Raman-based Distributed Temperature Sensor (RDTS) with centimetre-scale resolution for thermographic analysis of electronic circuits. Temperature is measured along a single-mode fiber routed across a custom printed circuit board (PCB) with 1 cm$^2$ heating elements, using optical time-domain reflectometry of Raman signals detected by superconducting nanowire single-photon detectors (S…
▽ More
We present a Raman-based Distributed Temperature Sensor (RDTS) with centimetre-scale resolution for thermographic analysis of electronic circuits. Temperature is measured along a single-mode fiber routed across a custom printed circuit board (PCB) with 1 cm$^2$ heating elements, using optical time-domain reflectometry of Raman signals detected by superconducting nanowire single-photon detectors (SNSPDs). This approach enables two-dimensional thermal mapping of the PCB under heating configurations with multiple hotspots. A spatial resolution of 3 cm and a temperature accuracy of 2 °C are achieved with an integration time of 5 minutes. Thermography can be performed down to 77 K, revealing that the PCB thermal resistance decreases by nearly an order of magnitude compared to room temperature, due to enhanced convective cooling in liquid nitrogen. These results establish centimetre-scale RDTS as a robust technique for real-time, spatially resolved thermography of electronic circuits, particularly in regimes where infrared imaging is ineffective, such as at low temperatures or within volumetric electronic architectures.
△ Less
Submitted 14 November, 2025;
originally announced November 2025.
-
Towards High-Efficiency Particle Detection Using Superconducting Microwire Arrays
Authors:
Christina Wang,
Cristián Peña,
Adolf Bornheim,
Shuoxing Wu,
Alexander Albert,
Thomas Sievert,
Artur Apresyan,
Emanuel Knehr,
Boris Korzh,
Jamie Luskin,
Ludovico Mori,
Sahil Patel,
Guillermo Reales Gutiérrez,
Manish Sahu,
Ekkehart Schmidt,
Matthew Shaw,
Elise Sledge,
Maria Spiropulu,
Towsif Taher,
Si Xie
Abstract:
We present a detailed study of an 8-channel $1\times1$ mm$^{2}$ WSi superconducting microwire single photon detector (SMSPD) array exposed to 120 GeV hadron beam and 120 GeV muon beam at the CERN Super Proton Synchrotron H6 beamline. Following up on our first detailed characterization of the efficiency and response of an SMSPD fabricated on a 3 nm WSi film, we report measurements of enhanced parti…
▽ More
We present a detailed study of an 8-channel $1\times1$ mm$^{2}$ WSi superconducting microwire single photon detector (SMSPD) array exposed to 120 GeV hadron beam and 120 GeV muon beam at the CERN Super Proton Synchrotron H6 beamline. Following up on our first detailed characterization of the efficiency and response of an SMSPD fabricated on a 3 nm WSi film, we report measurements of enhanced particle detection efficiency using a sensor fabricated from a thicker 4.7nm-thick WSi film. We also report the first SMSPD detection efficiency measurement made for muons. Measurements are enabled by a silicon tracking telescope providing 10 $μ$m in-situ spatial resolution. The results show a fill factor-normalized detection efficiency of 75% and a time resolution of about 130 ps across pixels. These findings represent a significant advancement toward developing high-efficiency SMSPD charged particle tracking systems with simultaneous precision timing, with potential applications in future accelerator-based experiments such as the FCC-ee and Muon Collider.
△ Less
Submitted 14 January, 2026; v1 submitted 8 October, 2025;
originally announced October 2025.
-
Enhanced Detection Rate and High Photon-Number Efficiencies with a Scalable Parallel SNSPD
Authors:
Lorenzo Stasi,
Towsif Taher,
Giovanni V. Resta,
Hugo Zbinden,
Rob Thew,
Félix Bussières
Abstract:
Since their inception, superconducting nanowire single-photon detectors have been enabling quantum optical applications and the rise of the photonic quantum industry. The evolution in the detector design and read-out strategies has led to the introduction of devices with a plurality of independent pixels, which have been able to operate with high system detection efficiency at high speed while als…
▽ More
Since their inception, superconducting nanowire single-photon detectors have been enabling quantum optical applications and the rise of the photonic quantum industry. The evolution in the detector design and read-out strategies has led to the introduction of devices with a plurality of independent pixels, which have been able to operate with high system detection efficiency at high speed while also supporting photon number resolution capabilities. However, this comes at the cost of a complex readout that requires one coaxial cable for each pixel of the array. Here, we report a 28-pixel SNSPD with a dedicated parallel architecture that, while maintaining a simple readout with a single coaxial line, enables the detector to operate at high speed with low-performance degradation. The device shows a maximum single-photon efficiency of 88% and is able to maintain its efficiency above 50%, coupled with a timing jitter lower than 80 ps, up to a detection rate of 200 million counts per second. The detector also provides state-of-the-art photon-number-resolving performances with a 2-photon efficiency of 75% and a 3-photon efficiency of 62%.
△ Less
Submitted 18 December, 2024; v1 submitted 21 June, 2024;
originally announced June 2024.
-
Unveiling photon statistics with a 100-pixel photon-number-resolving detector
Authors:
Risheng Cheng,
Yiyu Zhou,
Sihao Wang,
Mohan Shen,
Towsif Taher,
Hong X. Tang
Abstract:
Single-photon detectors are ubiquitous in quantum information science and quantum sensing. They are key enabling technologies for numerous scientific discoveries and fundamental tests of quantum optics. Photon-number-revolving detectors are the ultimate measurement tool of light. However, few detectors to date can provide high-fidelity photon number resolution at few-photon levels. Here, we demons…
▽ More
Single-photon detectors are ubiquitous in quantum information science and quantum sensing. They are key enabling technologies for numerous scientific discoveries and fundamental tests of quantum optics. Photon-number-revolving detectors are the ultimate measurement tool of light. However, few detectors to date can provide high-fidelity photon number resolution at few-photon levels. Here, we demonstrate an on-chip detector that can resolve up to 100 photons by spatiotemporally multiplexing an array of superconducting nanowires along a single waveguide. The unparalleled photon number resolution paired with the high-speed response exclusively allows us to unveil the quantum photon statistics of a true thermal light source for the first time, which is realized by direct measurement of high-order correlation function g^(N) with N up to 15, observation of photon-subtraction-induced photon number enhancement, and quantum-limited state discrimination against a coherent light source. Our detector provides a viable route towards various important applications, including photonic quantum computation and quantum metrology.
△ Less
Submitted 28 June, 2022;
originally announced June 2022.