Showing 1–50 of 75 results for author: Summers, D

Ion firehose and ion cyclotron instability with subtracted-Kappa distributions

Authors: Luiz F. Ziebell, Rudi Gaelzer, Danny Summers

Abstract: In the present paper we discuss numerical solutions of the dispersion relation for electromagnetic waves propagating along the lines of an ambient magnetic field, considering parameters representative of space plasma environments, and considering the ion population described by a subtracted-Kappa distribution. We consider situations in which the ion thermal anisotropy is such that… ▽ More In the present paper we discuss numerical solutions of the dispersion relation for electromagnetic waves propagating along the lines of an ambient magnetic field, considering parameters representative of space plasma environments, and considering the ion population described by a subtracted-Kappa distribution. We consider situations in which the ion thermal anisotropy is such that $T_{i\perp}<T_{i\parallel}$, and investigate the effect of some parameters associated to the subtracted-Kappa distribution on the ion firehose instability. We also consider situations in which $T_{i\perp}>T_{i\parallel}$, and investigate the effects of the same parameters on the ion-cyclotron instability. For both forms of instability, we also investigate the effect of the thermal anisotropy of the electron distribution, and the effect of the occurrence of a drift velocity in the electron distribution function. Among the results obtained, we show that the increase of the loss-cone feature in a bi-kappa distribution leads to a decrease of the growth rates of the firehose instability, and to an increase of the growth rates of the ion-cyclotron instability. △ Less

Submitted 25 June, 2026; originally announced June 2026.

Comments: 15 pages, 8 figures

The Solar eruptioN Integral Field Spectrograph

Authors: Vicki L. Herde, Phillip C. Chamberlin, Don Schmit, Adrian Daw, Ryan O. Milligan, Vanessa Polito, Souvik Bose, Spencer Boyajian, Paris Buedel, Will Edgar, Alex Gebben, Qian Gong, Ross Jacobsen, Nicholas Nell, Bennet Schwab, Alan Sims, David Summers, Zachary Turner, Trace Valade, Joseph Wallace

Abstract: The Solar eruptioN Integral Field Spectrograph (SNIFS) is a solar-gazing spectrograph scheduled to fly in the summer of 2025 on a NASA sounding rocket. Its goal is to view the solar chromosphere and transition region at a high cadence (1s) both spatially (0.5") and spectrally (33 mÅ) viewing wavelengths around Lyman Alpha (1216 Å), Si iii (1206 Å) and O v (1218 Å) to observe spicules, nanoflares,… ▽ More The Solar eruptioN Integral Field Spectrograph (SNIFS) is a solar-gazing spectrograph scheduled to fly in the summer of 2025 on a NASA sounding rocket. Its goal is to view the solar chromosphere and transition region at a high cadence (1s) both spatially (0.5") and spectrally (33 mÅ) viewing wavelengths around Lyman Alpha (1216 Å), Si iii (1206 Å) and O v (1218 Å) to observe spicules, nanoflares, and possibly a solar flare. This time cadence will provide yet-unobserved detail about fast-changing features of the Sun. The instrument is comprised of a Gregorian-style reflecting telescope combined with a spectrograph via a specialized mirrorlet array that focuses the light from each spatial location in the image so that it may be spectrally dispersed without overlap from neighboring locations. This paper discusses the driving science, detailed instrument and subsystem design, and pre-integration testing of the SNIFS instrument. △ Less

Submitted 11 July, 2024; originally announced July 2024.

Comments: 22 pages (not including references), 7 figures, submitting to Solar Physics

Multiple Coulomb Scattering of muons in Lithium Hydride

Authors: M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. P. Song, J. Y. Tang, Z. H. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, V. Palladino, A. de Bari, D. Orestano, L. Tortora, Y. Kuno, H. Sakamoto, A. Sato, S. Ishimoto, M. Chung, C. K. Sung, F. Filthaut, M. Fedorov, D. Jokovic, D. Maletic, M. Savic , et al. (112 additional authors not shown)

Abstract: Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liq… ▽ More Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liquid hydrogen or lithium hydride (LiH) energy absorber as part of a programme to develop muon accelerator facilities, such as a Neutrino Factory or a Muon Collider. The energy loss and MCS that occur in the absorber material are competing effects that alter the performance of the cooling channel. Therefore measurements of MCS are required in order to validate the simulations used to predict the cooling performance in future accelerator facilities. We report measurements made in the MICE apparatus of MCS using a LiH absorber and muons within the momentum range 160 to 245 MeV/c. The measured RMS scattering width is about 9% smaller than that predicted by the approximate formula proposed by the Particle Data Group. Data at 172, 200 and 240 MeV/c are compared to the GEANT4 (v9.6) default scattering model. These measurements show agreement with this more recent GEANT4 (v9.6) version over the range of incident muon momenta. △ Less

Submitted 21 September, 2022; originally announced September 2022.

Comments: 20 pages, 14 figures, journal

Report number: RAL-P-2022-001

Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1204 additional authors not shown)

Abstract: Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det… ▽ More Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation. △ Less

Submitted 30 June, 2022; v1 submitted 31 March, 2022; originally announced March 2022.

Comments: 31 pages, 15 figures

Report number: FERMILAB-PUB-22-240-AD-ESH-LBNF-ND-SCD, CERN-EP-2022-077

Journal ref: Eur.Phys.J.C 82 (2022) 10, 903

Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1202 additional authors not shown)

Abstract: DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and… ▽ More DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties △ Less

Submitted 3 June, 2022; v1 submitted 30 March, 2022; originally announced March 2022.

Comments: 31 pages, 29 figures

Report number: CERN-EP-DRAFT-MISC-2022-003; FERMILAB-PUB-22-242-LBNF

Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1132 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t… ▽ More The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Report number: FERMILAB-PUB-21-391-ND

Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti, M. P. Andrews , et al. (1158 additional authors not shown)

Abstract: The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.… ▽ More The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components. △ Less

Submitted 23 September, 2021; v1 submitted 4 August, 2021; originally announced August 2021.

Performance of the MICE diagnostic system

Authors: The MICE collaboration, M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. P. Song, J. Y. Tang, Z. H. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, V. Palladino, A. de Bari, D. Orestano, L. Tortora, Y. Kuno, H. Sakamoto, A. Sato, S. Ishimoto, M. Chung, C. K. Sung, F. Filthaut, M. Fedorov, D. Jokovic, D. Maletic , et al. (113 additional authors not shown)

Abstract: Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams of a neutrino factory and for multi-TeV lepton-antilepton collisions at a muon collider. The international Muon Ionization Cooling Experiment (MICE) has demonstrated the principle of ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at… ▽ More Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams of a neutrino factory and for multi-TeV lepton-antilepton collisions at a muon collider. The international Muon Ionization Cooling Experiment (MICE) has demonstrated the principle of ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at such facilities. This paper documents the performance of the detectors used in MICE to measure the muon-beam parameters, and the physical properties of the liquid hydrogen energy absorber during running. △ Less

Submitted 16 August, 2021; v1 submitted 10 June, 2021; originally announced June 2021.

Comments: 27 pages, 18 figures

Report number: RAL-P-2021-001

Journal ref: 2021 JINST 16 P08046

Deep Underground Neutrino Experiment (DUNE) Near Detector Conceptual Design Report

Authors: A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, N. Anfimov, A. Ankowski, M. Antonova, S. Antusch , et al. (1041 additional authors not shown)

Abstract: This report describes the conceptual design of the DUNE near detector This report describes the conceptual design of the DUNE near detector △ Less

Submitted 25 March, 2021; originally announced March 2021.

Comments: 314 pages, 185 figures

Report number: FERMILAB-PUB-21-067-E-LBNF-PPD-SCD-T

Supernova Neutrino Burst Detection with the Deep Underground Neutrino Experiment

Authors: DUNE collaboration, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (949 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE), a 40-kton underground liquid argon time projection chamber experiment, will be sensitive to the electron-neutrino flavor component of the burst of neutrinos expected from the next Galactic core-collapse supernova. Such an observation will bring unique insight into the astrophysics of core collapse as well as into the properties of neutrinos. The gen… ▽ More The Deep Underground Neutrino Experiment (DUNE), a 40-kton underground liquid argon time projection chamber experiment, will be sensitive to the electron-neutrino flavor component of the burst of neutrinos expected from the next Galactic core-collapse supernova. Such an observation will bring unique insight into the astrophysics of core collapse as well as into the properties of neutrinos. The general capabilities of DUNE for neutrino detection in the relevant few- to few-tens-of-MeV neutrino energy range will be described. As an example, DUNE's ability to constrain the $ν_e$ spectral parameters of the neutrino burst will be considered. △ Less

Submitted 29 May, 2021; v1 submitted 15 August, 2020; originally announced August 2020.

Comments: 29 pages, 17 figures; paper based on DUNE Technical Design Report. arXiv admin note: substantial text overlap with arXiv:2002.03005

Report number: FERMILAB-PUB-20-380-LBNF

First results on ProtoDUNE-SP liquid argon time projection chamber performance from a beam test at the CERN Neutrino Platform

Authors: DUNE Collaboration, B. Abi, A. Abed Abud, R. Acciarri, M. A. Acero, G. Adamov, M. Adamowski, D. Adams, P. Adrien, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga , et al. (970 additional authors not shown)

Abstract: The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber with an active volume of $7.2\times 6.0\times 6.9$ m$^3$. It is installed at the CERN Neutrino Platform in a specially-constructed beam that delivers charged pions, kaons, protons, muons and electrons with momenta in the range 0.3 GeV$/c$ to 7 GeV/$c$. Beam line instrumentation provides accurate momentum measurements… ▽ More The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber with an active volume of $7.2\times 6.0\times 6.9$ m$^3$. It is installed at the CERN Neutrino Platform in a specially-constructed beam that delivers charged pions, kaons, protons, muons and electrons with momenta in the range 0.3 GeV$/c$ to 7 GeV/$c$. Beam line instrumentation provides accurate momentum measurements and particle identification. The ProtoDUNE-SP detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment, and it incorporates full-size components as designed for that module. This paper describes the beam line, the time projection chamber, the photon detectors, the cosmic-ray tagger, the signal processing and particle reconstruction. It presents the first results on ProtoDUNE-SP's performance, including noise and gain measurements, $dE/dx$ calibration for muons, protons, pions and electrons, drift electron lifetime measurements, and photon detector noise, signal sensitivity and time resolution measurements. The measured values meet or exceed the specifications for the DUNE far detector, in several cases by large margins. ProtoDUNE-SP's successful operation starting in 2018 and its production of large samples of high-quality data demonstrate the effectiveness of the single-phase far detector design. △ Less

Submitted 3 June, 2021; v1 submitted 13 July, 2020; originally announced July 2020.

Comments: 93 pages, 70 figures

Report number: FERMILAB-PUB-20-059-AD-ESH-LBNF-ND-SCD, CERN-EP-2020-125

Journal ref: JINST 15 (2020) P12004

Neutrino interaction classification with a convolutional neural network in the DUNE far detector

Authors: DUNE Collaboration, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (951 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment is a next-generation neutrino oscillation experiment that aims to measure $CP$-violation in the neutrino sector as part of a wider physics program. A deep learning approach based on a convolutional neural network has been developed to provide highly efficient and pure selections of electron neutrino and muon neutrino charged-current interactions. The electr… ▽ More The Deep Underground Neutrino Experiment is a next-generation neutrino oscillation experiment that aims to measure $CP$-violation in the neutrino sector as part of a wider physics program. A deep learning approach based on a convolutional neural network has been developed to provide highly efficient and pure selections of electron neutrino and muon neutrino charged-current interactions. The electron neutrino (antineutrino) selection efficiency peaks at 90% (94%) and exceeds 85% (90%) for reconstructed neutrino energies between 2-5 GeV. The muon neutrino (antineutrino) event selection is found to have a maximum efficiency of 96% (97%) and exceeds 90% (95%) efficiency for reconstructed neutrino energies above 2 GeV. When considering all electron neutrino and antineutrino interactions as signal, a selection purity of 90% is achieved. These event selections are critical to maximize the sensitivity of the experiment to $CP$-violating effects. △ Less

Submitted 10 November, 2020; v1 submitted 26 June, 2020; originally announced June 2020.

Comments: 39 pages, 11 figures

Journal ref: Phys. Rev. D 102, 092003 (2020)

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume IV: Far Detector Single-phase Technology

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-clas… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. Central to achieving DUNE's physics program is a far detector that combines the many tens-of-kiloton fiducial mass necessary for rare event searches with sub-centimeter spatial resolution in its ability to image those events, allowing identification of the physics signatures among the numerous backgrounds. In the single-phase liquid argon time-projection chamber (LArTPC) technology, ionization charges drift horizontally in the liquid argon under the influence of an electric field towards a vertical anode, where they are read out with fine granularity. A photon detection system supplements the TPC, directly enhancing physics capabilities for all three DUNE physics drivers and opening up prospects for further physics explorations. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume IV presents an overview of the basic operating principles of a single-phase LArTPC, followed by a description of the DUNE implementation. Each of the subsystems is described in detail, connecting the high-level design requirements and decisions to the overriding physics goals of DUNE. △ Less

Submitted 8 September, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: Minor corrections made for JINST submission, 673 pages, 312 figures (corrected errors in author list)

Report number: FERMILAB-PUB-20-027-ND

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume III: DUNE Far Detector Technical Coordination

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Exper… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume III of this TDR describes how the activities required to design, construct, fabricate, install, and commission the DUNE far detector modules are organized and managed. This volume details the organizational structures that will carry out and/or oversee the planned far detector activities safely, successfully, on time, and on budget. It presents overviews of the facilities, supporting infrastructure, and detectors for context, and it outlines the project-related functions and methodologies used by the DUNE technical coordination organization, focusing on the areas of integration engineering, technical reviews, quality assurance and control, and safety oversight. Because of its more advanced stage of development, functional examples presented in this volume focus primarily on the single-phase (SP) detector module. △ Less

Submitted 8 September, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: Minor corrections made for JINST submission, 209 pages, 55 figures (updated typos in Table A.5; corrected errors in author list)

Report number: FERMILAB-PUB-20-026-ND

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume II: DUNE Physics

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-clas… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume II of this TDR, DUNE Physics, describes the array of identified scientific opportunities and key goals. Crucially, we also report our best current understanding of the capability of DUNE to realize these goals, along with the detailed arguments and investigations on which this understanding is based. This TDR volume documents the scientific basis underlying the conception and design of the LBNF/DUNE experimental configurations. As a result, the description of DUNE's experimental capabilities constitutes the bulk of the document. Key linkages between requirements for successful execution of the physics program and primary specifications of the experimental configurations are drawn and summarized. This document also serves a wider purpose as a statement on the scientific potential of DUNE as a central component within a global program of frontier theoretical and experimental particle physics research. Thus, the presentation also aims to serve as a resource for the particle physics community at large. △ Less

Submitted 25 March, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: 357 pages, 165 figures (updated typos in Table 6.1 and corrected errors in author list)

Report number: FERMILAB-PUB-20-025-ND

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume I: Introduction to DUNE

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Exper… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. This TDR is intended to justify the technical choices for the far detector that flow down from the high-level physics goals through requirements at all levels of the Project. Volume I contains an executive summary that introduces the DUNE science program, the far detector and the strategy for its modular designs, and the organization and management of the Project. The remainder of Volume I provides more detail on the science program that drives the choice of detector technologies and on the technologies themselves. It also introduces the designs for the DUNE near detector and the DUNE computing model, for which DUNE is planning design reports. Volume II of this TDR describes DUNE's physics program in detail. Volume III describes the technical coordination required for the far detector design, construction, installation, and integration, and its organizational structure. Volume IV describes the single-phase far detector technology. A planned Volume V will describe the dual-phase technology. △ Less

Submitted 8 September, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: Minor corrections made for JINST submission; 244 pages, 114 figures

Report number: FERMILAB-PUB-20-024-ND

Unconventional Ideas for Ionization Cooling of Muons

Authors: T. L. Hart, J. G. Acosta, L. M. Cremaldi, D. V. Neuffer, S. J. Oliveros, D. Stratakis, D. J. Summers, K. Yonehara

Abstract: Small muon beams increase the luminosity of a muon collider. Reducing the momentum and position spreads of muons reduces emittance and leads to small, cool beams. Ionization cooling has been observed at the Muon Ionization Cooling Experiment. 6D emittance reduction by a factor of 100, 000 has been achieved in simulation. Another factor of 5 in cooling would meet the basic requirements of a high lu… ▽ More Small muon beams increase the luminosity of a muon collider. Reducing the momentum and position spreads of muons reduces emittance and leads to small, cool beams. Ionization cooling has been observed at the Muon Ionization Cooling Experiment. 6D emittance reduction by a factor of 100, 000 has been achieved in simulation. Another factor of 5 in cooling would meet the basic requirements of a high luminosity muon collider. In this paper we compare, for the first time, the amount of RF needed in a cooling channel to previous linacs. We also outline three methods aimed to help achieve a final factor of 5 in 6D cooling. △ Less

Submitted 13 January, 2020; v1 submitted 1 November, 2019; originally announced November 2019.

Comments: 18 pages, 5 figures, explanations added

First demonstration of ionization cooling by the Muon Ionization Cooling Experiment

Authors: M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. P. Song, J. Y. Tang, Z. H. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, V. Palladino, A. de Bari, D. Orestano, L. Tortora, Y. Kuno, H. Sakamoto, A. Sato, S. Ishimoto, M. Chung, C. K. Sung, F. Filthaut, D. Jokovic, D. Maletic, M. Savic, N. Jovancevic , et al. (110 additional authors not shown)

Abstract: High-brightness muon beams of energy comparable to those produced by state-of-the-art electron, proton and ion accelerators have yet to be realised. Such beams have the potential to carry the search for new phenomena in lepton-antilepton collisions to extremely high energy and also to provide uniquely well-characterised neutrino beams. A muon beam may be created through the decay of pions produced… ▽ More High-brightness muon beams of energy comparable to those produced by state-of-the-art electron, proton and ion accelerators have yet to be realised. Such beams have the potential to carry the search for new phenomena in lepton-antilepton collisions to extremely high energy and also to provide uniquely well-characterised neutrino beams. A muon beam may be created through the decay of pions produced in the interaction of a proton beam with a target. To produce a high-brightness beam from such a source requires that the phase space volume occupied by the muons be reduced (cooled). Ionization cooling is the novel technique by which it is proposed to cool the beam. The Muon Ionization Cooling Experiment collaboration has constructed a section of an ionization cooling cell and used it to provide the first demonstration of ionization cooling. We present these ground-breaking measurements. △ Less

Submitted 19 July, 2019; originally announced July 2019.

Comments: 19 pages and 6 figures

Report number: RAL-P-2019-003

First particle-by-particle measurement of emittance in the Muon Ionization Cooling Experiment

Authors: The MICE Collaboration, D. Adams, D. Adey, R. Asfandiyarov, G. Barber, A. de Bari, R. Bayes, V. Bayliss, R. Bertoni, V. Blackmore, A. Blondel, J. Boehm, M. Bogomilov, M. Bonesini, C. N. Booth, D. Bowring, S. Boyd, T. W. Bradshaw, A. D. Bross, C. Brown, L. Coney, G. Charnley, G. T. Chatzitheodoridis, F. Chignoli, M. Chung , et al. (111 additional authors not shown)

Abstract: The Muon Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasibility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or muon collider. The emittance is measured from an ensemble of muons assembled from those that pass through the experiment. A pure muon ensemble is selected using a particle-identification s… ▽ More The Muon Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasibility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or muon collider. The emittance is measured from an ensemble of muons assembled from those that pass through the experiment. A pure muon ensemble is selected using a particle-identification system that can reject efficiently both pions and electrons. The position and momentum of each muon are measured using a high-precision scintillating-fibre tracker in a 4\,T solenoidal magnetic field. This paper presents the techniques used to reconstruct the phase-space distributions and reports the first particle-by-particle measurement of the emittance of the MICE Muon Beam as a function of muon-beam momentum. △ Less

Submitted 26 March, 2019; v1 submitted 31 October, 2018; originally announced October 2018.

The liquid-hydrogen absorber for MICE

Authors: V. Bayliss, J. Boehm, T. Bradshaw, M. Courthold, S. Harrison, M. Hills, P. Hodgson, S. Ishimoto, A. Kurup, W. Lau, K. Long, A. Nichols, D. Summers, M. Tucker, P. Warburton, S. Watson, C. Whyte

Abstract: The Muon Ionization Cooling Experiment (MICE) has been built at the STFC Rutherford Appleton Laboratory to demonstrate the principle of muon beam phase-space reduction via ionization cooling. Muon beam cooling will be required at a future proton-derived neutrino factory or muon collider. Ionization cooling is achieved by passing the beam through an energy-absorbing material, such as liquid hydroge… ▽ More The Muon Ionization Cooling Experiment (MICE) has been built at the STFC Rutherford Appleton Laboratory to demonstrate the principle of muon beam phase-space reduction via ionization cooling. Muon beam cooling will be required at a future proton-derived neutrino factory or muon collider. Ionization cooling is achieved by passing the beam through an energy-absorbing material, such as liquid hydrogen, and then re-accelerating the beam using RF cavities. This paper describes the hydrogen system constructed for MICE including: the liquid-hydrogen absorber, its associated cryogenic and gas systems, the control and monitoring system, and the necessary safety engineering. The performance of the system in cool-down, liquefaction, and stable operation is also presented. △ Less

Submitted 9 July, 2018; originally announced July 2018.

Comments: 25 pages, 21 figures, part of the MICE collaboration

A Wedge Test in MICE

Authors: Tanaz Angelina Mohayai, Pavel Snopok, David Neuffer, Don Summers

Abstract: Emittance exchange mediated by wedge absorbers can be used for longitudinal ionization cooling and for final transverse emittance minimization for a muon collider. A wedge absorber within the Muon Ionization Cooling Experiment (MICE) could serve as a demonstration of the type of emittance exchange needed for six-dimensional (6D) cooling, including the configurations needed for muon colliders. Para… ▽ More Emittance exchange mediated by wedge absorbers can be used for longitudinal ionization cooling and for final transverse emittance minimization for a muon collider. A wedge absorber within the Muon Ionization Cooling Experiment (MICE) could serve as a demonstration of the type of emittance exchange needed for six-dimensional (6D) cooling, including the configurations needed for muon colliders. Parameters for this test have been explored in simulation and applied to experimental configurations using a wedge-shaped absorber. A polyethylene wedge absorber has been fabricated and placed in MICE and data has been collected for both direct emittance exchange, where the longitudinal emittance decreases, and reverse emittance exchange, where the transverse emittance decreases. The simulation studies that led to the magnet and beam configurations are presented. △ Less

Submitted 5 June, 2018; originally announced June 2018.

Comments: 9th International Particle Accelerator Conference (IPAC 2018) Conference. C18-04-29

RF system for the MICE demonstration of ionization cooling

Authors: K. Ronald, C. G. Whyte, A. J. Dick, A. R. Young, D. Li, A. J. DeMello, A. R. Lambert, T. Luo, T. Anderson, D. Bowring, A. Bross, A. Moretti, R. Pasquinelli, D. Peterson, M. Popovic, R. Schultz, J. Volk, Y. Torun, P. Hanlet, B. Freemire, A. Moss, K. Dumbell, A. Grant, C. White, S. Griffiths , et al. (7 additional authors not shown)

Abstract: Muon accelerators offer an attractive option for a range of future particle physics experiments. They can enable high energy (TeV+) high energy lepton colliders whilst mitigating the difficulty of synchrotron losses, and can provide intense beams of neutrinos for fundamental physics experiments investigating the physics of flavor. The method of production of muon beams results in high beam emittan… ▽ More Muon accelerators offer an attractive option for a range of future particle physics experiments. They can enable high energy (TeV+) high energy lepton colliders whilst mitigating the difficulty of synchrotron losses, and can provide intense beams of neutrinos for fundamental physics experiments investigating the physics of flavor. The method of production of muon beams results in high beam emittance which must be reduced for efficient acceleration. Conventional emittance control schemes take too long, given the very short (2.2 microsecond) rest lifetime of the muon. Ionisation cooling offers a much faster approach to reducing particle emittance, and the international MICE collaboration aims to demonstrate this technique for the first time. This paper will present the MICE RF system and its role in the context of the overall experiment. △ Less

Submitted 14 September, 2017; originally announced September 2017.

Comments: 2 pp

Report number: Fermilab-Conf-17-071-AD

Use of Wedge Absorbers in MICE

Authors: David Neuffer, D. Summers, T. Mohayai, P. Snopok, C. Rogers

Abstract: Wedge absorbers are needed to obtain longitudinal cooling in ionization cooling. They also can be used to obtain emittance exchanges between longitudinal and transverse phase space. There can be large exchanges in emittance, even with single wedges. In the present note we explore the use of wedge absorbers in the MICE experiment to obtain transverse-longitudinal emittance exchanges within present… ▽ More Wedge absorbers are needed to obtain longitudinal cooling in ionization cooling. They also can be used to obtain emittance exchanges between longitudinal and transverse phase space. There can be large exchanges in emittance, even with single wedges. In the present note we explore the use of wedge absorbers in the MICE experiment to obtain transverse-longitudinal emittance exchanges within present and future operational conditions. The same wedge can be used to explore "direct" and "reverse" emittance exchange dynamics, where direct indicates a configuration that reduces momentum spread and reverse is a configuration that increases momentum spread. Analytical estimated and ICOOL and G4BeamLine simulations of the exchanges at MICE parameters are presented. Large exchanges can be obtained in both reverse and direct configurations. △ Less

Submitted 12 September, 2017; originally announced September 2017.

Comments: 10 pp. arXiv admin note: text overlap with arXiv:1612.08960, arXiv:1704.07889

Report number: Fermilab-FN-1028-AD-APC

Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector

Authors: M. Dragicevic, M. Friedl, J. Hrubec, H. Steininger, A. Gädda, J. Härkönen, T. Lampén, P. Luukka, T. Peltola, E. Tuominen, E. Tuovinen, A. Winkler, P. Eerola, T. Tuuva, G. Baulieu, G. Boudoul, L. Caponetto, C. Combaret, D. Contardo, T. Dupasquier, G. Gallbit, N. Lumb, L. Mirabito, S. Perries, M. Vander Donckt , et al. (462 additional authors not shown)

Abstract: A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator… ▽ More A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found. △ Less

Submitted 1 June, 2017; originally announced June 2017.

Report number: CMS-NOTE-2017-002

Wedge Absorbers In Final Cooling For A High-Energy High Luminosity Lepton Collider

Authors: David Neuffer, D. Summers, P. Snopok, T. Mohayai

Abstract: A high-energy muon collider scenario requires a final cooling system that reduces transverse emittance to ~25 microns (normalized) while allowing longitudinal emittance increase. Ionization cooling using high-field solenoids (or Li Lens) can reduce transverse emittances to ~100 microns in readily achievable configurations, confirmed by simulation. Passing these muon beams at ~100 MeV/c through cm-… ▽ More A high-energy muon collider scenario requires a final cooling system that reduces transverse emittance to ~25 microns (normalized) while allowing longitudinal emittance increase. Ionization cooling using high-field solenoids (or Li Lens) can reduce transverse emittances to ~100 microns in readily achievable configurations, confirmed by simulation. Passing these muon beams at ~100 MeV/c through cm-sized diamond wedges can reduce transverse emittances to ~25 microns, while increasing longitudinal emittances by a factor of ~25. Implementation will require optical matching of the exiting beam into downstream acceleration systems. △ Less

Submitted 25 April, 2017; originally announced April 2017.

Comments: 3 pp. arXiv admin note: text overlap with arXiv:1612.08960

Report number: Fermilab-Conf-16-133-AD-APC

Exploration of a High Luminosity 100 TeV Proton Antiproton Collider

Authors: Sandra Oliveros, Don Summers, Lucien Cremaldi, John Acosta, David Neuffer

Abstract: New physics is being explored with the Large Hadron Collider at CERN and with Intensity Frontier programs at Fermilab and KEK. The energy scale for new physics is known to be in the multi-TeV range, signaling the need for a future collider which well surpasses this energy scale. We explore a 10$^{\,34}$ cm$^{-2}$ s$^{-1}$ luminosity, 100 TeV $p\bar{p}$ collider with 7$\times$ the energy of the LHC… ▽ More New physics is being explored with the Large Hadron Collider at CERN and with Intensity Frontier programs at Fermilab and KEK. The energy scale for new physics is known to be in the multi-TeV range, signaling the need for a future collider which well surpasses this energy scale. We explore a 10$^{\,34}$ cm$^{-2}$ s$^{-1}$ luminosity, 100 TeV $p\bar{p}$ collider with 7$\times$ the energy of the LHC but only 2$\times$ as much NbTi superconductor, motivating the choice of 4.5 T single bore dipoles. The cross section for many high mass states is 10 times higher in $p\bar{p}$ than $pp$ collisions. Antiquarks for production can come directly from an antiproton rather than indirectly from gluon splitting. The higher cross sections reduce the synchrotron radiation in superconducting magnets and the number of events per beam crossing, because lower beam currents can produce the same rare event rates. Events are more centrally produced, allowing a more compact detector with less space between quadrupole triplets and a smaller $β^{*}$ for higher luminosity. A Fermilab-like $\bar p$ source would disperse the beam into 12 momentum channels to capture more antiprotons. Because stochastic cooling time scales as the number of particles, 12 cooling ring sets would be used. Each set would include phase rotation to lower momentum spreads, equalize all momentum channels, and stochastically cool. One electron cooling ring would follow the stochastic cooling rings. Finally antiprotons would be recycled during runs without leaving the collider ring by joining them to new bunches with synchrotron damping. △ Less

Submitted 26 April, 2017; v1 submitted 12 April, 2017; originally announced April 2017.

Comments: 11 pages, 20 figures, SESAPS 2015 Conference. Reference corrected

Report number: SESAPS-2015-F1-4

Design and expected performance of the MICE demonstration of ionization cooling

Authors: MICE Collaboration, M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. Song, J. Tang, Z. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, V. Palladino, A. de Bari, G. Cecchet, D. Orestano, L. Tortora, Y. Kuno, S. Ishimoto, F. Filthaut, D. Jokovic, D. Maletic, M. Savic, O. M. Hansen, S. Ramberger, M. Vretenar , et al. (107 additional authors not shown)

Abstract: Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams necessary to elucidate the physics of flavour at a neutrino factory and to provide lepton-antilepton collisions at energies of up to several TeV at a muon collider. The international Muon Ionization Cooling Experiment (MICE) aims to demonstrate ionization cooling, the technique by which it is proposed… ▽ More Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams necessary to elucidate the physics of flavour at a neutrino factory and to provide lepton-antilepton collisions at energies of up to several TeV at a muon collider. The international Muon Ionization Cooling Experiment (MICE) aims to demonstrate ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at such facilities. In an ionization-cooling channel, the muon beam passes through a material in which it loses energy. The energy lost is then replaced using RF cavities. The combined effect of energy loss and re-acceleration is to reduce the transverse emittance of the beam (transverse cooling). A major revision of the scope of the project was carried out over the summer of 2014. The revised experiment can deliver a demonstration of ionization cooling. The design of the cooling demonstration experiment will be described together with its predicted cooling performance. △ Less

Submitted 27 January, 2017; v1 submitted 23 January, 2017; originally announced January 2017.

Comments: 21 pages, 10 figures

Report number: RAL-P-2017-002

Journal ref: Phys. Rev. Accel. Beams 20, 063501 (2017)

Final Cooling for a High-Energy High-Luminosity Lepton Collider

Authors: David Neuffer, Hisham Sayed, Terry Hart, Don Summers

Abstract: A high-energy muon collider scenario require a "final cooling" system that reduces transverse emittance by a factor of ~10 while allowing longitudinal emittance increase. The baseline approach has low-energy transverse cooling within high-field solenoids, with strong longitudinal heating. This approach and its recent simulation are discussed. Alternative approaches which more explicitly include em… ▽ More A high-energy muon collider scenario require a "final cooling" system that reduces transverse emittance by a factor of ~10 while allowing longitudinal emittance increase. The baseline approach has low-energy transverse cooling within high-field solenoids, with strong longitudinal heating. This approach and its recent simulation are discussed. Alternative approaches which more explicitly include emittance exchange are also presented. Round-to-flat beam transform, transverse slicing, and longitudinal bunch coalescence are possible components of an alternative approach. Wedge-based emittance exchange could provide much of the required transverse cooling with longitudinal heating. Li-lens and quadrupole focusing systems could also provide much of the required final cooling. △ Less

Submitted 28 December, 2016; originally announced December 2016.

Comments: 16 pp

Report number: Fermilab-Pub-15-524-AD-APC

Accomplishments of the Heavy Electron Particle Accelerator Program

Authors: D. Neuffer, D. Stratakis, M. Palmer, J-P Delahaye, D. Summers, R. Ryne, M. A. Cummings

Abstract: The Muon Accelerator Program (MAP) has completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of heavy lepton colliders (HLCs) from the 125 GeV Higgs Factory to more than 10 TeV, as well as exploring using a μ storage ring (MSR) for neutrinos, and establishing that M… ▽ More The Muon Accelerator Program (MAP) has completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of heavy lepton colliders (HLCs) from the 125 GeV Higgs Factory to more than 10 TeV, as well as exploring using a μ storage ring (MSR) for neutrinos, and establishing that MSRs could provide factory-level intensities of $ν_e (\barν_e)$ and $\barν_μ$ $(ν_μ)$ beams. The key components of the collider and neutrino factory systems were identified. Feasible designs and detailed simulations of all of these components have been obtained, including some initial hardware component tests, setting the stage for future implementation where resources are available and the precise physics goals become apparent. △ Less

Submitted 22 December, 2016; originally announced December 2016.

Comments: 4 pp

Report number: Fermilab-Conf-16-457-AD-APC

Wedge Absorbers For Muon Cooling With a Test Beam At MICE

Authors: David Neuffer, J. Acosta, D. Summers, T. Mohayai, P. Snopok

Abstract: Emittance exchange mediated by wedge absorbers is required for longitudinal ionization cooling and for final transverse emittance minimization for a muon collider. A wedge absorber within the MICE beam line could serve as a demonstration of the type of emittance exchange needed for 6-D cooling, including the configurations needed for muon colliders. Parameters for this test are explored in simulat… ▽ More Emittance exchange mediated by wedge absorbers is required for longitudinal ionization cooling and for final transverse emittance minimization for a muon collider. A wedge absorber within the MICE beam line could serve as a demonstration of the type of emittance exchange needed for 6-D cooling, including the configurations needed for muon colliders. Parameters for this test are explored in simulation and possible experimental configurations with simulated results are presented. △ Less

Submitted 21 December, 2016; originally announced December 2016.

Comments: 3 pp

Report number: FERMILAB-CONF-16-459-AD-APC

Progress on Cherenkov Reconstruction in MICE

Authors: Daniel M. Kaplan, Michael Drews, Durga Rajaram, Miles Winter, Lucien Cremaldi, David Sanders, Don Summers

Abstract: Two beamline Cherenkov detectors (Ckov-a,-b) support particle identification in the MICE beamline. Electrons and high-momentum muons and pions can be identified with good efficiency. We report on the Ckov-a,-b performance in detecting pions and muons with MICE Step I data and derive an upper limit on the pion contamination in the standard MICE muon beam. Two beamline Cherenkov detectors (Ckov-a,-b) support particle identification in the MICE beamline. Electrons and high-momentum muons and pions can be identified with good efficiency. We report on the Ckov-a,-b performance in detecting pions and muons with MICE Step I data and derive an upper limit on the pion contamination in the standard MICE muon beam. △ Less

Submitted 26 January, 2016; originally announced January 2016.

Comments: 5 pages, 3 figures. Prepared for the XXVII International Workshop on Neutrino Factories and Future Neutrino Facilities (NuFact15), 10-15 August 2015, Centro Brasileiro de Pesquisas Físicas (CBPF), Rio de Janeiro, Brazil

Report number: IIT-CAPP-15-8

Pion contamination in the MICE muon beam

Authors: D. Adams, A. Alekou, M. Apollonio, R. Asfandiyarov, G. Barber, P. Barclay, A. de Bari, R. Bayes, V. Bayliss, R. Bertoni, V. J. Blackmore, A. Blondel, S. Blot, M. Bogomilov, M. Bonesini, C. N. Booth, D. Bowring, S. Boyd, T. W. Bradshaw, U. Bravar, A. D. Bross, M. Capponi, T. Carlisle, G. Cecchet, C. Charnley , et al. (120 additional authors not shown)

Abstract: The international Muon Ionization Cooling Experiment (MICE) will perform a systematic investigation of ionization cooling with muon beams of momentum between 140 and 240\,MeV/c at the Rutherford Appleton Laboratory ISIS facility. The measurement of ionization cooling in MICE relies on the selection of a pure sample of muons that traverse the experiment. To make this selection, the MICE Muon Beam i… ▽ More The international Muon Ionization Cooling Experiment (MICE) will perform a systematic investigation of ionization cooling with muon beams of momentum between 140 and 240\,MeV/c at the Rutherford Appleton Laboratory ISIS facility. The measurement of ionization cooling in MICE relies on the selection of a pure sample of muons that traverse the experiment. To make this selection, the MICE Muon Beam is designed to deliver a beam of muons with less than $\sim$1\% contamination. To make the final muon selection, MICE employs a particle-identification (PID) system upstream and downstream of the cooling cell. The PID system includes time-of-flight hodoscopes, threshold-Cherenkov counters and calorimetry. The upper limit for the pion contamination measured in this paper is $f_π< 1.4\%$ at 90\% C.L., including systematic uncertainties. Therefore, the MICE Muon Beam is able to meet the stringent pion-contamination requirements of the study of ionization cooling. △ Less

Submitted 10 February, 2016; v1 submitted 2 November, 2015; originally announced November 2015.

Comments: 16 pages, 7 figures

Report number: RAL-P-2015-009

Journal ref: JINST 11 (2016) 03, P03002

Electron-Muon Ranger: performance in the MICE Muon Beam

Authors: D. Adams, A. Alekou, M. Apollonio, R. Asfandiyarov, G. Barber, P. Barclay, A. de Bari, R. Bayes, V. Bayliss, P. Bene, R. Bertoni, V. J. Blackmore, A. Blondel, S. Blot, M. Bogomilov, M. Bonesini, C. N. Booth, D. Bowring, S. Boyd, T. W. Bradshaw, U. Bravar, A. D. Bross, F. Cadoux, M. Capponi, T. Carlisle , et al. (129 additional authors not shown)

Abstract: The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling c… ▽ More The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100-280 MeV/$c$. △ Less

Submitted 3 November, 2015; v1 submitted 28 October, 2015; originally announced October 2015.

Comments: 22 pages, 19 figures

Report number: RAL-P-2015-008

Luminosity and Crab Waist Collision Studies

Authors: Wanwei Wu, Don Summers

Abstract: In high energy physics, the luminosity is one useful value to characterize the performance of a particle collider. To gain more available data, we need to maximize the luminosity in most collider experiments. With the discussions of tune shift involved the beam dynamics and a recently proposed "crabbed waist" scheme of beam-beam collisions, we present some qualitative analysis to increase the lumi… ▽ More In high energy physics, the luminosity is one useful value to characterize the performance of a particle collider. To gain more available data, we need to maximize the luminosity in most collider experiments. With the discussions of tune shift involved the beam dynamics and a recently proposed "crabbed waist" scheme of beam-beam collisions, we present some qualitative analysis to increase the luminosity. In addition, beam-beam tune shifts and luminosities of $e^{+}e^{-}$, $pp$/$p\bar{p}$, and $μ^{+}μ^{-}$ colliders are discussed. △ Less

Submitted 24 May, 2015; originally announced May 2015.

Comments: 11 pages, 3 figures, 3 tables

Final Muon Emittance Exchange in Vacuum for a Collider

Authors: Don Summers, John Acosta, Lucien Cremaldi, Terry Hart, Sandra Oliveros, Lalith Perera, Wanwei Wu, David Neuffer

Abstract: We outline a plan for final muon ionization cooling with quadrupole doublets focusing onto short absorbers followed by emittance exchange in vacuum to achieve the small transverse beam sizes needed by a muon collider. A flat muon beam with a series of quadrupole doublet half cells appears to provide the strong focusing required for final cooling. Each quadrupole doublet has a low beta region occup… ▽ More We outline a plan for final muon ionization cooling with quadrupole doublets focusing onto short absorbers followed by emittance exchange in vacuum to achieve the small transverse beam sizes needed by a muon collider. A flat muon beam with a series of quadrupole doublet half cells appears to provide the strong focusing required for final cooling. Each quadrupole doublet has a low beta region occupied by a dense, low Z absorber. After final cooling, normalized xyz emittances of (0.071, 0.141, 2.4) mm-rad are exchanged into (0.025, 0.025, 70) mm-rad. Thin electrostatic septa efficiently slice the bunch into 17 parts. The 17 bunches are interleaved into a 3.7 meter long train with RF deflector cavities. Snap bunch coalescence combines the muon bunch train longitudinally in a 21 GeV ring in 55 microseconds, one quarter of a synchrotron oscillation period. A linear long wavelength RF bucket gives each bunch a different energy causing the bunches to drift until they merge into one bunch and can be captured in a short wavelength RF bucket with a 13% muon decay loss and a packing fraction as high as 87%. △ Less

Submitted 7 May, 2015; originally announced May 2015.

Comments: 4 pages, 6 figures, IPAC-2015

Report number: IPAC-2015-TUPWI044

Trapping in irradiated p-on-n silicon sensors at fluences anticipated at the HL-LHC outer tracker

Authors: W. Adam, T. Bergauer, M. Dragicevic, M. Friedl, R. Fruehwirth, M. Hoch, J. Hrubec, M. Krammer, W. Treberspurg, W. Waltenberger, S. Alderweireldt, W. Beaumont, X. Janssen, S. Luyckx, P. Van Mechelen, N. Van Remortel, A. Van Spilbeeck, P. Barria, C. Caillol, B. Clerbaux, G. De Lentdecker, D. Dobur, L. Favart, A. Grebenyuk, Th. Lenzi , et al. (663 additional authors not shown)

Abstract: The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determi… ▽ More The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trapping rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trapping rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trapping rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggests an improved tracker performance over initial expectations. △ Less

Submitted 7 May, 2015; originally announced May 2015.

Journal ref: 2016 JINST 11 P04023

Muon Emittance Exchange with a Potato Slicer

Authors: D. J. Summers, T. L. Hart, J. G. Acosta, L. M. Cremaldi, S. J. Oliveros, L. P. Perera, D. V. Neuffer

Abstract: We propose a novel scheme for final muon ionization cooling with quadrupole doublets followed by emittance exchange in vacuum to achieve the small beam sizes needed by a muon collider. A flat muon beam with a series of quadrupole doublet half cells appears to provide the strong focusing required for final cooling. Each quadrupole doublet has a low beta region occupied by a dense, low Z absorber. A… ▽ More We propose a novel scheme for final muon ionization cooling with quadrupole doublets followed by emittance exchange in vacuum to achieve the small beam sizes needed by a muon collider. A flat muon beam with a series of quadrupole doublet half cells appears to provide the strong focusing required for final cooling. Each quadrupole doublet has a low beta region occupied by a dense, low Z absorber. After final cooling, normalized transverse, longitudinal, and angular momentum emittances of 0.100, 2.5, and 0.200 mm-rad are exchanged into 0.025, 70, and 0.0 mm-rad. A skew quadrupole triplet transforms a round muon bunch with modest angular momentum into a flat bunch with no angular momentum. Thin electrostatic septa efficiently slice the flat bunch into 17 parts. The 17 bunches are interleaved into a 3.7 meter long train with RF deflector cavities. Snap bunch coalescence combines the muon bunch train longitudinally in a 21 GeV ring in 55 microseconds, one quarter of a synchrotron oscillation period. A linear long wavelength RF bucket gives each bunch a different energy causing the bunches to drift in the ring until they merge into one bunch and can be captured in a short wavelength RF bucket with a 13% muon decay loss and a packing fraction as high as 87%. △ Less

Submitted 15 April, 2015; originally announced April 2015.

Comments: 13 pages, 7 figures

Report number: MAP-DOC-4405

Design of a dual species atom interferometer for space

Authors: Thilo Schuldt, Christian Schubert, Markus Krutzik, Lluis Gesa Bote, Naceur Gaaloul, Jonas Hartwig, Holger Ahlers, Waldemar Herr, Katerine Posso-Trujillo, Jan Rudolph, Stephan Seidel, Thijs Wendrich, Wolfgang Ertmer, Sven Herrmann, André Kubelka-Lange, Alexander Milke, Benny Rievers, Emanuele Rocco, Andrew Hinton, Kai Bongs, Markus Oswald, Matthias Franz, Matthias Hauth, Achim Peters, Ahmad Bawamia , et al. (32 additional authors not shown)

Abstract: Atom interferometers have a multitude of proposed applications in space including precise measurements of the Earth's gravitational field, in navigation & ranging, and in fundamental physics such as tests of the weak equivalence principle (WEP) and gravitational wave detection. While atom interferometers are realized routinely in ground-based laboratories, current efforts aim at the development of… ▽ More Atom interferometers have a multitude of proposed applications in space including precise measurements of the Earth's gravitational field, in navigation & ranging, and in fundamental physics such as tests of the weak equivalence principle (WEP) and gravitational wave detection. While atom interferometers are realized routinely in ground-based laboratories, current efforts aim at the development of a space compatible design optimized with respect to dimensions, weight, power consumption, mechanical robustness and radiation hardness. In this paper, we present a design of a high-sensitivity differential dual species $^{85}$Rb/$^{87}$Rb atom interferometer for space, including physics package, laser system, electronics and software. The physics package comprises the atom source consisting of dispensers and a 2D magneto-optical trap (MOT), the science chamber with a 3D-MOT, a magnetic trap based on an atom chip and an optical dipole trap (ODT) used for Bose-Einstein condensate (BEC) creation and interferometry, the detection unit, the vacuum system for $10^{-11}$ mbar ultra-high vacuum generation, and the high-suppression factor magnetic shielding as well as the thermal control system. The laser system is based on a hybrid approach using fiber-based telecom components and high-power laser diode technology and includes all laser sources for 2D-MOT, 3D-MOT, ODT, interferometry and detection. Manipulation and switching of the laser beams is carried out on an optical bench using Zerodur bonding technology. The instrument consists of 9 units with an overall mass of 221 kg, an average power consumption of 608 W (819 W peak), and a volume of 470 liters which would well fit on a satellite to be launched with a Soyuz rocket, as system studies have shown. △ Less

Submitted 8 December, 2014; originally announced December 2014.

Comments: 30 pages, 23 figures, accepted for publication in Experimental Astronomy

STE-QUEST - Test of the Universality of Free Fall Using Cold Atom Interferometry

Authors: D. Aguilera, H. Ahlers, B. Battelier, A. Bawamia, A. Bertoldi, R. Bondarescu, K. Bongs, P. Bouyer, C. Braxmaier, L. Cacciapuoti, C. Chaloner, M. Chwalla, W. Ertmer, M. Franz, N. Gaaloul, M. Gehler, D. Gerardi, L. Gesa, N. Gürlebeck, J. Hartwig, M. Hauth, O. Hellmig, W. Herr, S. Herrmann, A. Heske , et al. (41 additional authors not shown)

Abstract: The theory of general relativity describes macroscopic phenomena driven by the influence of gravity while quantum mechanics brilliantly accounts for microscopic effects. Despite their tremendous individual success, a complete unification of fundamental interactions is missing and remains one of the most challenging and important quests in modern theoretical physics. The STE-QUEST satellite mission… ▽ More The theory of general relativity describes macroscopic phenomena driven by the influence of gravity while quantum mechanics brilliantly accounts for microscopic effects. Despite their tremendous individual success, a complete unification of fundamental interactions is missing and remains one of the most challenging and important quests in modern theoretical physics. The STE-QUEST satellite mission, proposed as a medium-size mission within the Cosmic Vision program of the European Space Agency (ESA), aims for testing general relativity with high precision in two experiments by performing a measurement of the gravitational redshift of the Sun and the Moon by comparing terrestrial clocks, and by performing a test of the Universality of Free Fall of matter waves in the gravitational field of Earth comparing the trajectory of two Bose-Einstein condensates of Rb85 and Rb87. The two ultracold atom clouds are monitored very precisely thanks to techniques of atom interferometry. This allows to reach down to an uncertainty in the Eötvös parameter of at least 2x10E-15. In this paper, we report about the results of the phase A mission study of the atom interferometer instrument covering the description of the main payload elements, the atomic source concept, and the systematic error sources. △ Less

Submitted 14 April, 2014; v1 submitted 20 December, 2013; originally announced December 2013.

Comments: 21 pages, 5 figures

Muon Collider Higgs Factory for Snowmass 2013

Authors: Yuri Alexahin, Charles M. Ankenbrandt, David B. Cline, Alexander Conway, Mary Anne Cummings, Vito Di Benedetto, Estia Eichten, Corrado Gatto, Benjamin Grinstein, Jack Gunion, Tao Han, Gail Hanson, Christopher T. Hill, Fedor Ignatov, Rolland P. Johnson, Valeri Lebedev, Ron Lipton, Zhen Liu, Tom Markiewicz, Anna Mazzacane, Nikolai Mokhov, Sergei Nagaitsev, David Neuffer, Mark Palmer, Milind V. Purohit , et al. (5 additional authors not shown)

Abstract: We propose the construction of, and describe in detail, a compact Muon Collider s-channel Higgs Factory. We propose the construction of, and describe in detail, a compact Muon Collider s-channel Higgs Factory. △ Less

Submitted 9 August, 2013; originally announced August 2013.

Comments: 43 pages, 20 figures, 10 tables

Report number: FERMILAB-CONF-13-245-T

The Case for a Muon Collider Higgs Factory

Authors: Yuri Alexahin, Charles M. Ankenbrandt, David B. Cline, Alexander Conway, Mary Anne Cummings, Vito Di Benedetto, Estia Eichten, Jean-Pierre Delahaye, Corrado Gatto, Benjamin Grinstein, Jack Gunion, Tao Han, Gail Hanson, Christopher T. Hill, Fedor Ignatov, Rolland P. Johnson, Valeri Lebedev, Leon M. Lederman, Ron Lipton, Zhen Liu, Tom Markiewicz, Anna Mazzacane, Nikolai Mokhov, Sergei Nagaitsev, David Neuffer , et al. (8 additional authors not shown)

Abstract: We propose the construction of a compact Muon Collider Higgs Factory. Such a machine can produce up to \sim 14,000 at 8\times 10^{31} cm^-2 sec^-1 clean Higgs events per year, enabling the most precise possible measurement of the mass, width and Higgs-Yukawa coupling constants. We propose the construction of a compact Muon Collider Higgs Factory. Such a machine can produce up to \sim 14,000 at 8\times 10^{31} cm^-2 sec^-1 clean Higgs events per year, enabling the most precise possible measurement of the mass, width and Higgs-Yukawa coupling constants. △ Less

Submitted 23 July, 2013; originally announced July 2013.

Comments: Supporting letter for the document: "Muon Collider Higgs Factory for Smowmass 2013", A White Paper submitted to the 2013 U.S. Community Summer Study of the Division of Particles and Fields of the American Physical Society, Y. Alexahin, et. al, FERMILAB-CONF-13-245-T (July, 2013)

Characterisation of the muon beams for the Muon Ionisation Cooling Experiment

Authors: The MICE Collaboration, D. Adams, D. Adey, A. Alekou, M. Apollonio, R. Asfandiyarov, J. Back, G. Barber, P. Barclay, A. de Bari, R. Bayes, V. Bayliss, R. Bertoni, V. J. Blackmore, A. Blondel, S. Blot, M. Bogomilov, M. Bonesini, C. N. Booth, D. Bowring, S. Boyd, T. W. Bradshaw, U. Bravar, A. D. Bross, M. Capponi , et al. (119 additional authors not shown)

Abstract: A novel single-particle technique to measure emittance has been developed and used to characterise seventeen different muon beams for the Muon Ionisation Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to 281 MeV/c, have emittances of approximately 1.5--2.3 πmm-rad horizontally and 0.6--1.0 πmm-rad vertically, a horizontal dispersion of 90--190 mm and momentum spreads o… ▽ More A novel single-particle technique to measure emittance has been developed and used to characterise seventeen different muon beams for the Muon Ionisation Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to 281 MeV/c, have emittances of approximately 1.5--2.3 πmm-rad horizontally and 0.6--1.0 πmm-rad vertically, a horizontal dispersion of 90--190 mm and momentum spreads of about 25 MeV/c. There is reasonable agreement between the measured parameters of the beams and the results of simulations. The beams are found to meet the requirements of MICE. △ Less

Submitted 11 October, 2013; v1 submitted 6 June, 2013; originally announced June 2013.

Comments: Published in EPJC, 20 pages, 15 figures

A 233 km Tunnel for Lepton and Hadron Colliders

Authors: D. J. Summers, L. M. Cremaldi, A. Datta, M. Duraisamy, T. Luo, G. T. Lyons

Abstract: A decade ago, a cost analysis was conducted to bore a 233 km circumference Very Large Hadron Collider (VLHC) tunnel passing through Fermilab. Here we outline implementations of $e^+e^-$, $p \bar{p}$, and $μ^+ μ^-$ collider rings in this tunnel using recent technological innovations. The 240 and 500 GeV $e^+e^-$ colliders employ Crab Waist Crossings, ultra low emittance damped bunches, short vertic… ▽ More A decade ago, a cost analysis was conducted to bore a 233 km circumference Very Large Hadron Collider (VLHC) tunnel passing through Fermilab. Here we outline implementations of $e^+e^-$, $p \bar{p}$, and $μ^+ μ^-$ collider rings in this tunnel using recent technological innovations. The 240 and 500 GeV $e^+e^-$ colliders employ Crab Waist Crossings, ultra low emittance damped bunches, short vertical IP focal lengths, superconducting RF, and low coercivity, grain oriented silicon steel/concrete dipoles. Some details are also provided for a high luminosity 240 GeV $e^+ e^-$ collider and 1.75 TeV muon accelerator in a Fermilab site filler tunnel. The 40 TeV $p \bar{p}$ collider uses the high intensity Fermilab $\bar{p}$ source, exploits high cross sections for $p \bar{p}$ production of high mass states, and uses 2 Tesla ultra low carbon steel/YBCO superconducting magnets run with liquid neon. The 35 TeV muon ring ramps the 2 Tesla superconducting magnets at 9 Hz every 0.4 seconds, uses 250 GV of superconducting RF to accelerate muons from 1.75 to 17.5 TeV in 63 orbits with 71% survival, and mitigates neutrino radiation with phase shifting, roller coaster motion in a FODO lattice. △ Less

Submitted 31 July, 2012; originally announced July 2012.

Comments: LaTex, 6 pages, 1 figure, Advanced Accelerator Concepts Workshop, Austin, TX, 10-15 June 2012

Test of a 1.8 Tesla, 400 Hz Dipole for a Muon Synchrotron

Authors: D. J. Summers, L. M. Cremaldi, T. L. Hart, L. P. Perera, M. Reep, H. Witte, S. Hansen, M. L. Lopes, J. Reidy, Jr.

Abstract: A 1.8 T dipole magnet using thin grain oriented silicon steel laminations has been constructed as a prototype for a muon synchrotron ramping at 400 Hz. Following the practice in large 3 phase transformers and our own Opera-2d simulations, joints are mitred to take advantage of the magnetic properties of the steel which are much better in the direction in which the steel was rolled. Measurements wi… ▽ More A 1.8 T dipole magnet using thin grain oriented silicon steel laminations has been constructed as a prototype for a muon synchrotron ramping at 400 Hz. Following the practice in large 3 phase transformers and our own Opera-2d simulations, joints are mitred to take advantage of the magnetic properties of the steel which are much better in the direction in which the steel was rolled. Measurements with a Hysteresigraph 5500 and Epstein frame show a high magnetic permeability which minimizes stored energy in the yoke allowing the magnet to ramp quickly with modest voltage. Coercivity is low which minimizes hysteresis losses. A power supply with a fast Insulated Gate Bipolar Transistor (IGBT) switch and a capacitor was constructed. Coils are wound with 12 gauge copper wire. Thin wire and laminations minimize eddy current losses. The magnetic field was measured with a peak sensing Hall probe. △ Less

Submitted 28 July, 2012; originally announced July 2012.

Comments: 3 pages, 9 figures, IPAC-2012-New Orleans

Report number: IPAC-2012-THPPD020, UMISS-HEP-2012-01

Rapid-cycling synchrotron with variable momentum compaction

Authors: Y. Alexahin, D. J. Summers

Abstract: There are conflicting requirements on the value of the momentum compaction factor during energy ramping in a synchrotron: at low energies it should be positive and sufficiently large to make the slippage factor small so that it is possible to work closer to the RF voltage crest and ensure sufficient RF bucket area, whereas at higher energies it should be small or negative to avoid transition cross… ▽ More There are conflicting requirements on the value of the momentum compaction factor during energy ramping in a synchrotron: at low energies it should be positive and sufficiently large to make the slippage factor small so that it is possible to work closer to the RF voltage crest and ensure sufficient RF bucket area, whereas at higher energies it should be small or negative to avoid transition crossing. In the present report we propose a lattice with a variable momentum compaction factor and consider the possibility of using it in a high repetition rate proton driver for a muon collider and neutrino factory. △ Less

Submitted 1 February, 2012; originally announced February 2012.

Comments: 3 pp. 1st International Particle Accelerator Conference: IPAC'10, 23-28 May 2010: Kyoto, Japan

Report number: FERMILAB-CONF-10-121-APC

MICE: the Muon Ionization Cooling Experiment. Step I: First Measurement of Emittance with Particle Physics Detectors

Authors: U. Bravar, M. Bogomilov, Y. Karadzhov, D. Kolev, I. Russinov, R. Tsenov, L. Wang, F. Y. Xu, S. X. Zheng, R. Bertoni, M. Bonesini, R. Mazza, V. Palladino, G. Cecchet, A. de Bari, M. Capponi, A. Iaciofano, D. Orestano, F. Pastore, L. Tortora, S. Ishimoto, S. Suzuki, K. Yoshimura, Y. Mori, Y. Kuno , et al. (123 additional authors not shown)

Abstract: The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with… ▽ More The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with time-of-flight and Cherenkov detectors to ensure a pure muon beam. The emittance of the incoming beam will be measured in the upstream magnetic spectrometer with a scintillating fiber tracker. A cooling cell will then follow, alternating energy loss in Liquid Hydrogen (LH2) absorbers to RF cavity acceleration. A second spectrometer, identical to the first, and a second muon identification system will measure the outgoing emittance. In the 2010 run at RAL the muon beamline and most detectors were fully commissioned and a first measurement of the emittance of the muon beam with particle physics (time-of-flight) detectors was performed. The analysis of these data was recently completed and is discussed in this paper. Future steps for MICE, where beam emittance and emittance reduction (cooling) are to be measured with greater accuracy, are also presented. △ Less

Submitted 30 July, 2013; v1 submitted 9 October, 2011; originally announced October 2011.

Comments: Proceedings of the DPF-2011 Conference, Providence, RI, August 8-13, 2011

Magnetic Field Expansion Out of a Plane: Application to Inverse Cyclotron Muon Cooling

Authors: T. L. Hart, D. J. Summers, K. Paul

Abstract: In studies of the dynamics of charged particles in a cyclotron magnetic field, the specified field is generally B_z in the z = 0 midplane where B_r and B_theta are zero. B_r(r, theta, z) and B_theta(r, theta, z) are simple to determine through a linear expansion which assumes that B_z is independent of z. But, an expansion to only first order may not be sufficient for orbit simulations at large z.… ▽ More In studies of the dynamics of charged particles in a cyclotron magnetic field, the specified field is generally B_z in the z = 0 midplane where B_r and B_theta are zero. B_r(r, theta, z) and B_theta(r, theta, z) are simple to determine through a linear expansion which assumes that B_z is independent of z. But, an expansion to only first order may not be sufficient for orbit simulations at large z. This paper reviews the expansion of a specified B_z(r, theta, z = 0) out of the z = 0 midplane to arbitrary order, and shows simple examples worked out to 4th order. △ Less

Submitted 13 May, 2011; originally announced May 2011.

Recent Developments in Simulations of an Inverse Cyclotron for Intense Muon Beams

Authors: Kevin Paul, Estelle Cormier-Michel, Terrence Hart, Donald Summers

Abstract: A number of recent developments have led to simulations of an inverse cyclotron for cooling intense muon beams for neutrino factories and muon colliders. Such a device could potentially act as a novel beam cooling mechanism for muons, and it would be significantly smaller and cheaper than other cooling channel designs. Realistic designs are still being explored, but the first simulations of partic… ▽ More A number of recent developments have led to simulations of an inverse cyclotron for cooling intense muon beams for neutrino factories and muon colliders. Such a device could potentially act as a novel beam cooling mechanism for muons, and it would be significantly smaller and cheaper than other cooling channel designs. Realistic designs are still being explored, but the first simulations of particle tracking in the inverse cyclotron, with accumulation in the cyclotron core, have been done with electrostatic simulations in the particle-in-cell code VORPAL. We present an overview of the muon inverse cyclotron concept and recent simulation results. △ Less

Submitted 19 August, 2010; originally announced August 2010.

Comments: 6 pages, 3 figures, submitted to the Proceedings for the 2010 Advanced Accelerator Concepts workshop, Annapolis, MD

Journal ref: AIP Conf.Proc.1299:676-681,2010

A Cherenkov Radiation Detector with High Density Aerogels

Authors: Lucien Cremaldi, David A. Sanders, Peter Sonnek, Donald J. Summers, Jim Reidy Jr

Abstract: We have designed a threshold Cherenkov detector at the Rutherford-Appleton Laboratory to identify muons with momenta between 230 and 350 MeV/c. We investigated the properties of three aerogels for the design. The nominal indexes of refraction were n = 1.03, 1.07, 1.12, respectively. Two of the samples are of high density aerogel not commonly used for Cherenkov light detection. We present results… ▽ More We have designed a threshold Cherenkov detector at the Rutherford-Appleton Laboratory to identify muons with momenta between 230 and 350 MeV/c. We investigated the properties of three aerogels for the design. The nominal indexes of refraction were n = 1.03, 1.07, 1.12, respectively. Two of the samples are of high density aerogel not commonly used for Cherenkov light detection. We present results of an examination of some optical properties of the aerogel samples and present basic test beam results. △ Less

Submitted 20 May, 2009; originally announced May 2009.

Comments: LaTeX, 4 pages, 8 figures

Journal ref: IEEE Trans.Nucl.Sci.56:1475-1478,2009

A Complete Scheme of Ionization Cooling for a Muon Collider

Authors: Robert B. Palmer, J. Scott Berg, Richard C. Fernow, Juan Carlos Gallardo, Harold G. Kirk, Yuri Alexahin, David Neuffer, Stephen Alan Kahn, Don Summers

Abstract: A complete scheme for production and cooling a muon beam for three specified muon colliders is presented. Parameters for these muon colliders are given. The scheme starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Emittance exchange cooling in slow helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains… ▽ More A complete scheme for production and cooling a muon beam for three specified muon colliders is presented. Parameters for these muon colliders are given. The scheme starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Emittance exchange cooling in slow helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains into single bunches, one of each sign. Further cooling in all dimensions is applied to the single bunches in further slow helical lattices. Final transverse cooling to the required parameters is achieved in 50 T solenoids using high Tc superconductor at 4 K. Preliminary simulations of each element are presented. △ Less

Submitted 27 November, 2007; originally announced November 2007.

Comments: 3 pages, 6 figures

Report number: BNL-78088-2007-CP

Journal ref: Conf.Proc.C070625:3193,2007