Showing 1–50 of 118 results for author: Hu, T

High bandwidth traveling wave electro-optic modulator at 1μm on thin-film lithium tantalate

Authors: Ayed Al Sayem, Shiekh Zia Uddin, Ting-Chen Hu, Alaric Tate, Mark Cappuzzo, Rose Kopf, Mark Earnshaw

Abstract: We present the first experimental demonstration of a high-bandwidth thin-film lithium tantalate (TFLT) electro-optic modulator operating at 1 μm, with a Vπ of 2.4 V, and less than 2 dB electro-optic roll-off up to 50 GHz and stable DC bias operation. We present the first experimental demonstration of a high-bandwidth thin-film lithium tantalate (TFLT) electro-optic modulator operating at 1 μm, with a Vπ of 2.4 V, and less than 2 dB electro-optic roll-off up to 50 GHz and stable DC bias operation. △ Less

Submitted 10 April, 2026; originally announced April 2026.

Comments: 6 pages, 4 figures

Construction and characterization of a muon trigger detector for the PSI muEDM experiment

Authors: Guan Ming Wong, Tianqi Hu, Samip Basnet, Chavdar Dutsov, Siew Yan Hoh, David Höhl, Xingyun Huang, Timothy David Hume, Alexander Johannes Jäger, Kim Siang Khaw, Meng Lyu, Ljiljana Morvaj, Jun Kai Ng, Angela Papa, Diego Alejandro Sanz Becerra, Philipp Schmidt-Wellenburg, Yusuke Takeuchi, Yonghao Zeng

Abstract: We present the upgraded design, construction, and beam test results for the Muon Trigger Detector (MTD) developed for the muon Electric Dipole Moment (muEDM) experiment at the Paul Scherrer Institute (PSI) in Switzerland. This experiment aims to improve the sensitivity of the muon EDM measurement by more than three orders of magnitude beyond the current limit established by the BNL Muon $g-2$ expe… ▽ More We present the upgraded design, construction, and beam test results for the Muon Trigger Detector (MTD) developed for the muon Electric Dipole Moment (muEDM) experiment at the Paul Scherrer Institute (PSI) in Switzerland. This experiment aims to improve the sensitivity of the muon EDM measurement by more than three orders of magnitude beyond the current limit established by the BNL Muon $g-2$ experiment. Precise identification of storable incoming muons at the entrance of the storage solenoid is essential, as the MTD must rapidly trigger a pulsed magnetic kicker to confine muons in the central region of the solenoid, where a weakly focusing magnetic field is maintained. The MTD comprises two subsystems: a \SI{0.1}{mm}-thick plastic scintillator ``gate detector'' read out by four silicon photomultipliers (SiPMs), and a \SI{5}{mm}-thick CNC-machined plastic scintillator ``active aperture detector'' read out by six SiPMs. The geometry of the active aperture detector was optimized through acceptance studies to maximize both storage efficiency and background veto efficiency. Integrated fast electronics generate an LVTTL trigger signal under an anti-coincidence condition -- a muon detected in the gate but not in the aperture -- ensuring selective triggering of storable muon events for the EDM measurement. The system was tested at the PSI $π$E1 beamline using \SI{22.5}{MeV/\textit{c}} muons under scaled-down conditions to characterize detector response and trigger performance. A Geant4 simulation incorporating detailed optical photon transport and SiPM response modeling was developed and reproduces the measured event topologies with ${\sim}97\%$ agreement. These results validate the detector design and demonstrate the MTD's readiness for deployment in the full muEDM Phase-1 setup. △ Less

Submitted 28 March, 2026; originally announced March 2026.

Comments: 36 pages, 19 figures

Energization of Proton via Beam-Driven Ion Bernstein Waves in p11B Plasmas

Authors: Yangchun Liu, Hairong Huang, Dong Wu, Tianxing Hu, Huasheng Xie, Bing Liu, Zhengmao Sheng, Jiaqi Dong, Yueng-Kay Martin Peng

Abstract: Energizing background ions plays a pivotal role in all forms of thermal nuclear fusion, as it can increase the fusion reaction rate without affecting the overall mechanical equilibrium. This is particularly critical for p11B fusion due to its exceptionally high operating temperature and substantial energy losses from bremsstrahlung radiation. Here, we report a nonlinear mechanism that efficiently… ▽ More Energizing background ions plays a pivotal role in all forms of thermal nuclear fusion, as it can increase the fusion reaction rate without affecting the overall mechanical equilibrium. This is particularly critical for p11B fusion due to its exceptionally high operating temperature and substantial energy losses from bremsstrahlung radiation. Here, we report a nonlinear mechanism that efficiently transfers the energy of injected heating beams to background protons in p11B mixed plasmas, via fully kinetic Particle-In-Cell (PIC) simulations. When a proton neutral beam is injected into p11B plasmas, it triggers the excitation of ion Bernstein waves (IBWs) at harmonics of the proton cyclotron frequency. In the initial linear stage, the energy channels to background electrons and protons might be comparable, consistent with theoretical model for the energy transfer. However, in the latter nonlinear stage, the dominant channel transfers to background protons, generating a non-Maxwellian population of energetic protons. This transition is driven by a nonlinear spectral cascade of IBWs toward lower frequencies and longer wavelengths, which strengthens wave proton coupling while suppressing wave electron coupling. △ Less

Submitted 3 March, 2026; originally announced March 2026.

Sustaining high-fidelity quantum logic in neutral-atom circuits via mid-circuit operations

Authors: Rui Lin, You Li, Le-Tian Zheng, Tai-Ran Hu, Si-Yuan Chen, Hong-Ming Wu, Yu-Chen Zhang, Hao-Wen Cheng, Yu-Hao Deng, Zhan Wu, Ming-Cheng Chen, Jun Rui, Chao-Yang Lu, Jian-Wei Pan

Abstract: The realization of fault-tolerant quantum computation hinges on the ability to execute deep quantum circuits while maintaining gate fidelities consistently above error-correction thresholds. Although neutral-atom arrays have recently demonstrated high-fidelity two-qubit gates and early-stage logical quantum processors, sustaining such high performance across deep, repetitive circuits remains a for… ▽ More The realization of fault-tolerant quantum computation hinges on the ability to execute deep quantum circuits while maintaining gate fidelities consistently above error-correction thresholds. Although neutral-atom arrays have recently demonstrated high-fidelity two-qubit gates and early-stage logical quantum processors, sustaining such high performance across deep, repetitive circuits remains a formidable challenge due to cumulative motional heating and atom loss. Here we demonstrate a sustainable neutral-atom framework that overcomes these limitations by integrating a suite of hardware-efficient mid-circuit operations. We report a two-qubit controlled logic gate with a raw fidelity of 99.60(1)%, which is further increased to a fidelity of 99.81(1)% via non-destructive erasure detection. Crucially, by implementing in-circuit Raman sideband cooling and qubit re-initialization, we demonstrate that gate fidelities can be maintained at the ~99.8% level across multiple operational rounds without observable degradation. By actively managing the internal and motional entropy of the system mid-stream, our in-situ refreshable architecture provides a critical pathway for executing the repeated syndrome-extraction cycles required for large-scale, continuous quantum error correction. △ Less

Submitted 2 March, 2026; originally announced March 2026.

High-power handling and bias stability of thin-film Lithium Tantalate microring and coupling resonators

Authors: Ayed Sayem, Shiekh Zia Uddin, Ting-Chen Hu, Alaric Tate, Mark Cappuzzo, Rose Kopf, Mark Earnshaw

Abstract: In this paper, we demonstrate the ultra-high-power handling capability and DC bias stability of optical microring and electro-optic (EO) coupling resonators on the thin-film lithium tantalate (TFLT) platform. We show that, with annealing, oxide-cladded TFLT resonators can handle several watts (4W) of circulating power with minimal frequency shift and no observable photo-refractive effect. Furtherm… ▽ More In this paper, we demonstrate the ultra-high-power handling capability and DC bias stability of optical microring and electro-optic (EO) coupling resonators on the thin-film lithium tantalate (TFLT) platform. We show that, with annealing, oxide-cladded TFLT resonators can handle several watts (4W) of circulating power with minimal frequency shift and no observable photo-refractive effect. Furthermore, we demonstrate a compact 2mm coupling modulator achieving a low Vpi of 3V with stable bias and phase control in the telecom C-band. △ Less

Submitted 5 April, 2026; v1 submitted 31 January, 2026; originally announced February 2026.

Comments: 5 pages, 3 figures

Efficient high-harmonic generation in van der Waals ferroelectric NbOI$_2$ crystals

Authors: Tianchen Hu, Feng Li, Junhan Huang, Chen Qian, Ruoxuan Ding, Hao Wang, Qiaomei Liu, Qiong Wu, Ruifeng Lu, Chunmei Zhang, Nanlin Wang

Abstract: Layered NbOX$_2$ ($X=\mathrm{Cl,\,Br,\,I}$), a member of the van der Waals ferroelectric family, exhibits intrinsic ferroelectricity and pronounced nonlinear optical responses, making it a promising candidate for integrated nanophotonics applications. While previous studies have emphasized the material's strong second-order nonlinear responses, higher-order nonlinear responses are still mostly une… ▽ More Layered NbOX$_2$ ($X=\mathrm{Cl,\,Br,\,I}$), a member of the van der Waals ferroelectric family, exhibits intrinsic ferroelectricity and pronounced nonlinear optical responses, making it a promising candidate for integrated nanophotonics applications. While previous studies have emphasized the material's strong second-order nonlinear responses, higher-order nonlinear responses are still mostly unexplored. This work systematically investigates NbOI$_2$ using high harmonic generation (HHG) spectroscopy. Driven by an intense mid-infrared laser field centered at $\sim4~μ\mathrm{m}$ wavelength, highly anisotropic odd- and even-order harmonics up to the 16th order are generated at a low peak intensity of $0.4~\mathrm{TW\,cm^{-2}}$, extending beyond the material's bandgap. Both bulk and flake forms of NbOI$_2$ display pronounced harmonic emission from the near-infrared to the deep-ultraviolet spectral region, with a notably high overall conversion efficiency compared to other known materials. Polarization-resolved measurements reveal that even-order harmonics remain aligned with the crystal polar axis regardless of the driving-field orientation, whereas odd-order harmonics are dynamically affected. First-principles calculations suggest that the flat valence band associated with Peierls dimerization enhances HHG efficiency through electron correlation. These findings provide fresh perspectives on HHG in van der Waals ferroelectric materials and facilitate the development of compact and tunable quantum light sources. △ Less

Submitted 29 January, 2026; originally announced January 2026.

Data-Driven Flow Initialization Framework for CFD Acceleration of Underwater Vehicle in Vertical-Plane Oblique Motion

Authors: Tianli Hu, Chengsheng Wu, Jun Ding, Xing Wang, Yu Yang, Jianchun Wang

Abstract: Accurate prediction of flow fields around underwater vehicles undergoing vertical-plane oblique motions is critical for hydrodynamic analysis, but it often requires computationally expensive CFD simulations. This study proposes a Data-Driven Flow Initialization (DDFI) framework that accelerates CFD simulation by integrating deep neural network (DNN) to predict full-domain flow fields. Using the su… ▽ More Accurate prediction of flow fields around underwater vehicles undergoing vertical-plane oblique motions is critical for hydrodynamic analysis, but it often requires computationally expensive CFD simulations. This study proposes a Data-Driven Flow Initialization (DDFI) framework that accelerates CFD simulation by integrating deep neural network (DNN) to predict full-domain flow fields. Using the suboff hull under various inlet velocities and angles of attack as an example, a DNN is trained to predict velocity, pressure, and turbulent quantities based on mesh geometry, operating conditions, and hybrid vectors. The DNN can provide reasonably accurate predictions with a relative error about 3.3%. To enhance numerical accuracy while maintaining physical consistency, the DNN-predicted flow fields are utilized as initial solutions for the CFD solver, achieving up to 3.5-fold and 2.0-fold speedup at residual thresholds of 5*10^(-6)and 5*10^(-8), respectively. This method maintains physical consistency by refining neural network outputs via traditional CFD solvers, balancing computational efficiency and accuracy. Notably, reducing the size of training set does not exert an essential impact on acceleration performance. Besides, this method exhibits cross-mesh generalization capability. In general, this proposed hybrid approach offers a new pathway for high-fidelity and efficient full-domain flow field predictions around complex underwater vehicles. △ Less

Submitted 5 January, 2026; originally announced January 2026.

Simulating surfactant effects in phase-transforming fluids

Authors: Keyu Feng, Saikat Mukherjee, Tianyi Hu, Hector Gomez

Abstract: Surfactants are critical in natural processes and engineering, but measuring their concentrations in non-equilibrium conditions and in the presence of flow is difficult. Therefore, computational methods are a key tool for improving our understanding. Predicting the effect of surfactants on liquid-vapor transformations is particularly challenging due to (1) simultaneous mass transfer, non-equilibri… ▽ More Surfactants are critical in natural processes and engineering, but measuring their concentrations in non-equilibrium conditions and in the presence of flow is difficult. Therefore, computational methods are a key tool for improving our understanding. Predicting the effect of surfactants on liquid-vapor transformations is particularly challenging due to (1) simultaneous mass transfer, non-equilibrium thermodynamics and Marangoni stresses, and (2) the phenomenological assumptions underlying many liquid-vapor phase-change models. Starting from the Navier-Stokes-Korteweg equations, a first-principles approach to liquid-vapor phase transformations, we developed a model of liquid-vapor flows with surfactants. We performed simulations of bubbles under equilibrium and liquid-vapor interface oscillations to demonstrate that the model successfully reproduces surfactant-mediated reductions in surface tension. We also investigated the mechanisms whereby surfactant affects bubble coalescence and condensation. Overall, this work provides a new framework for studying the effect of surfactants on liquid-vapor transformations and suggests multiple areas for future research, including the impact of complex surface chemistries on flow around bubbles and the acoustic response of bubbles with surfactants. △ Less

Submitted 23 March, 2026; v1 submitted 9 December, 2025; originally announced December 2025.

Investigation of the Physical Mechanism behind Retention Loss in FeFETs with MIFIFIS Gate Structure

Authors: Tao Hu, Zeqi Chen, Runhao Han, Xinpei Jia, Jia Yang, Mingkai Bai, Ruoyao Ji, Yajing Ding, Mengwei Zhao, Yuhan Li, Kaiyi Li, Wenbo Fan, Xianzhou Shao, Xiaoqing Sun, Kai Han, Jing Zhang, Yanrong Wang, Junshuai Chai, Hao Xu, Xiaolei Wang, Wenwu Wang, Tianchun Ye

Abstract: A Metal-Gate Blocking Layer (GBL)- Ferroelectric-Tunnel Dielectric Layer (TDL)-Ferroelectric -Channel Insulator (Ch.IL)-Si (MIFIFIS) structure is proposed to achieve a larger MW for applications in Fe-NAND. However, the large retention loss (RL) in the MIFIFIS structure restricts its application. In this work, we vary the physical thickness of the GBL and TDL, and conduct an in-depth analysis of t… ▽ More A Metal-Gate Blocking Layer (GBL)- Ferroelectric-Tunnel Dielectric Layer (TDL)-Ferroelectric -Channel Insulator (Ch.IL)-Si (MIFIFIS) structure is proposed to achieve a larger MW for applications in Fe-NAND. However, the large retention loss (RL) in the MIFIFIS structure restricts its application. In this work, we vary the physical thickness of the GBL and TDL, and conduct an in-depth analysis of the energy bands of the gate structure to investigate the physical mechanism behind the RL in FeFETs with the MIFIFIS structure. The physical origin of the RL is that the electric field direction across the TDL reduces the potential barrier provided by the ferroelectric near the silicon substrate. Based on the above physical mechanism, the RL can be reduced to 12% and 0.2% by redesigning the gate structure or reducing the pulse amplitude, respectively. Our work contributes to a deeper understanding of the physical mechanism behind the RL in FeFETs with the MIFIFIS gate structure. It provides guidance for enhancing the reliability of FeFETs. △ Less

Submitted 4 December, 2025; originally announced December 2025.

Comments: 4 pages, 6 figures

Initial performance results of the JUNO detector

Authors: Angel Abusleme, Thomas Adam, Kai Adamowicz, David Adey, Shakeel Ahmad, Rizwan Ahmed, Timo Ahola, Sebastiano Aiello, Fengpeng An, Guangpeng An, Costas Andreopoulos, Giuseppe Andronico, João Pedro Athayde Marcondes de André, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, Didier Auguste, Margherita Buizza Avanzini, Andrej Babic, Jingzhi Bai, Weidong Bai, Nikita Balashov, Roberto Barbera, Andrea Barresi , et al. (1114 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO) started physics data taking on 26 August 2025. JUNO consists of a 20-kton liquid scintillator central detector, surrounded by a 35 kton water pool serving as a Cherenkov veto, and almost 1000 m$^2$ of plastic scintillator veto on top. The detector is located in a shallow underground laboratory with an overburden of 1800 m.w.e. This paper present… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO) started physics data taking on 26 August 2025. JUNO consists of a 20-kton liquid scintillator central detector, surrounded by a 35 kton water pool serving as a Cherenkov veto, and almost 1000 m$^2$ of plastic scintillator veto on top. The detector is located in a shallow underground laboratory with an overburden of 1800 m.w.e. This paper presents the performance results of the detector, extensively studied during the commissioning of the water phase, the subsequent liquid scintillator filling phase, and the first physics runs. The liquid scintillator achieved an attenuation length of 20.6 m at 430 nm, while the high coverage PMT system and scintillator together yielded about 1785 photoelectrons per MeV of energy deposit at the detector centre, measured using the 2.223 MeV $γ$ from neutron captures on hydrogen with an Am-C calibration source. The reconstructed energy resolution is 3.4% for two 0.511 MeV $γ$ at the detector centre and 2.9% for the 0.93 MeV quenched Po-214 alpha decays from natural radioactive sources. The energy nonlinearity is calibrated to better than 1%. Intrinsic contaminations of U-238 and Th-232 in the liquid scintillator are below 10$^{-16}$ g/g, assuming secular equilibrium. The water Cherenkov detector achieves a muon detection efficiency better than 99.9% for muons traversing the liquid scintillator volume. During the initial science runs, the data acquisition duty cycle exceeded 97.8%, demonstrating the excellent stability and readiness of JUNO for high-precision neutrino physics. △ Less

Submitted 18 November, 2025; originally announced November 2025.

Comments: 38 pages, 23 figures

Prospects for geoneutrino detection with JUNO

Authors: Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Fengpeng An, João Pedro Athayde Marcondes de André, Costas Andreopoulos, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Didier Auguste, Marcel Büchner, Weidong Bai, Nikita Balashov, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Beretta, Antonio Bergnoli, Nikita Bessonov, Daniel Bick, Lukas Bieger, Svetlana Biktemerova, Thilo Birkenfeld, Simon Blyth , et al. (605 additional authors not shown)

Abstract: Geoneutrinos, which are antineutrinos emitted during the decay of long-lived radioactive elements inside Earth, serve as a unique tool for studying the composition and heat budget of our planet. The Jiangmen Underground Neutrino Observatory (JUNO) experiment in China, which has recently completed construction, is expected to collect a sample comparable in size to the entire existing world geoneutr… ▽ More Geoneutrinos, which are antineutrinos emitted during the decay of long-lived radioactive elements inside Earth, serve as a unique tool for studying the composition and heat budget of our planet. The Jiangmen Underground Neutrino Observatory (JUNO) experiment in China, which has recently completed construction, is expected to collect a sample comparable in size to the entire existing world geoneutrino dataset in less than a year. This paper presents an updated estimation of sensitivity to geoneutrinos of JUNO using the best knowledge available to date about the experimental site, the surrounding nuclear reactors, the detector response uncertainties, and the constraints expected from the TAO satellite detector. To facilitate comparison with present and future geological models, our results cover a wide range of predicted signal strengths. Despite the significant background from reactor antineutrinos, the experiment will measure the total geoneutrino flux with a precision comparable to that of existing experiments within its first few years, ultimately achieving a world-leading precision of about 8% over ten years. The large statistics of JUNO will also allow separation of the Uranium-238 and Thorium-232 contributions with unprecedented precision, providing crucial constraints on models of formation and composition of Earth. Observation of the mantle signal above the lithospheric flux will be possible but challenging. For models with the highest predicted mantle concentrations of heat-producing elements, a 3-sigma detection over six years requires knowledge of the lithospheric flux to within 15%. Together with complementary measurements from other locations, the geoneutrino results of JUNO will offer cutting-edge, high-precision insights into the interior of Earth, of fundamental importance to both the geoscience and neutrino physics communities. △ Less

Submitted 10 November, 2025; originally announced November 2025.

Comments: 32 pages, with 13 figures and 5 tables

PGDM: Physically guided diffusion model for land surface temperature downscaling

Authors: Huanyu Zhang, Bo-Hui Tang, Tian Hu, Yun Jiang, Zhao-Liang Li

Abstract: Land surface temperature (LST) is a fundamental parameter in thermal infrared remote sensing, while current LST products are often constrained by the trade-off between spatial and temporal resolutions. To mitigate this limitation, numerous studies have been conducted to enhance the resolutions of LST data, with a particular emphasis on the spatial dimension (commonly known as LST downscaling). Nev… ▽ More Land surface temperature (LST) is a fundamental parameter in thermal infrared remote sensing, while current LST products are often constrained by the trade-off between spatial and temporal resolutions. To mitigate this limitation, numerous studies have been conducted to enhance the resolutions of LST data, with a particular emphasis on the spatial dimension (commonly known as LST downscaling). Nevertheless, a comprehensive benchmark dataset tailored for this task remains scarce. In addition, existing downscaling models face challenges related to accuracy, practical usability, and the capability to self-evaluate their uncertainties. To overcome these challenges, this study first compiled three representative datasets, including one dataset over mainland China containing 22,909 image patches for model training and evaluation, as well as two datasets covering 40 heterogeneous regions worldwide for external evaluation. Subsequently, grounded in the surface energy balance (SEB)-based geophysical reasoning, we proposed the physically guided diffusion model (PGDM) for LST downscaling. In this framework, the downscaling task was formulated as an inference problem, aiming to sample from the posterior distribution of high-spatial-resolution (HR) LST conditioned on low-spatial-resolution (LR) LST observations and a suite of HR geophysical priors. Comprehensive evaluations demonstrate the effectiveness of PGDM, which generates high-quality downscaling results and outperforms existing representative interpolation, kernel-driven, hybrid, and deep learning approaches. Finally, by exploiting the inherent stochasticity of PGDM, the scene-level standard deviation of multiple generations was computed, revealing a strong positive linear correlation with the actual downscaling error... △ Less

Submitted 8 November, 2025; originally announced November 2025.

Phase-Field/Discontinuity Capturing operator for direct van der Waals simulation (DVS)

Authors: Tianyi Hu, Thomas J. R. Hughes, Guglielmo Scovazzi, Hector Gomez

Abstract: Discontinuity capturing (DC) operators are commonly employed to numerically solve problems involving sharp gradients in the solution. Despite their success, the application of DC operators to the direct van der Waals simulation (DVS) remains challenging. The DVS framework models non-equilibrium phase transitions by admitting interfacial regions in which the derivative of pressure with respect to d… ▽ More Discontinuity capturing (DC) operators are commonly employed to numerically solve problems involving sharp gradients in the solution. Despite their success, the application of DC operators to the direct van der Waals simulation (DVS) remains challenging. The DVS framework models non-equilibrium phase transitions by admitting interfacial regions in which the derivative of pressure with respect to density is negative. In these regions, we demonstrate that classical DC operators may violate the free energy dissipation law and produce unphysical wave structures. To address this limitation, we propose the phase-field/discontinuity capturing (PF/DC) operator. Numerical results show that PF/DC yields stable and accurate solutions in both bulk fluids and interfacial regions. Finally, we apply the proposed method to simulate cavitating flow over a three-dimensional bluff body, obtaining excellent agreement with experimental data and significant improvements over results produced using classical DC operators. △ Less

Submitted 23 October, 2025; originally announced October 2025.

Polarization Multiplexed Metalens Array Optical Chip for High-Performance LWIR Polarimetric Camera

Authors: Shichuan Wang, Tie Hu, Zihan Mei, Xuancheng Peng, Bing Yan, Wenhong Zhou, Ming Zhao, Zhenyu Yang

Abstract: Compared with traditional infrared thermal imaging, polarimetric imaging provides additional polarization information, which effectively enhances object contours and image contrast, with broad application in both military and civilian domains. However, the traditional long-wave infrared polarimetric camera suffers from severe thermal noise, low sensitivity and limited detection accuracy. To addres… ▽ More Compared with traditional infrared thermal imaging, polarimetric imaging provides additional polarization information, which effectively enhances object contours and image contrast, with broad application in both military and civilian domains. However, the traditional long-wave infrared polarimetric camera suffers from severe thermal noise, low sensitivity and limited detection accuracy. To address the aforementioned problems, a novel cooled LWIR polarimetric camera based on an achromatic polarization multiplexed germanium-based metalens array optical chip is reported in this paper, enabling high-precision division of focal plane linearly polarimetric imaging. The proposed system demonstrates high-precision linearly polarimetric imaging, with the metalens array achieving an average transmittance of 84.7% across the 8.4~11.6μm band and a polarization extinction ratio exceeding 10. The metasurface-based camera attains an average polarization reconstruction error below 0.981%, markedly surpassing state-of-the-art commercial LWIR polarimetric systems. Additionally, the new camera presents excellent polarimetric imaging capability for complex scenes. To the best of our knowledge, this represents the world's first LWIR polarimetric camera utilizing the metasurface optical chip with performance superior to commercial cameras, promoting the practical development of metasurface-integrated devices. △ Less

Submitted 17 October, 2025; originally announced October 2025.

Unveiling Retention Loss Mechanism in FeFETs with Gate-side Interlayer by Decoupling Trapped Charges and Ferroelectric Polarization

Authors: Runhao Han, Tao Hu, Jia Yang, Saifei Dai, Yajing Ding, Mingkai Bai, Xianzhou Shao, Junshuai Chai, Hao Xu, Qing Luo, Wenwu Wang, Tianchun Ye, Xiaolei Wang

Abstract: We propose a direct experimental extraction technique for trapped charges and quantitative energy band diagrams in the FeFETs with metal-insulator-ferroelectric-insulator-semiconductor (MIFIS) structure, derived from the physical relationship between Vth and gate-side interlayer (G.IL) thickness. By decoupling trapped charges and ferroelectric polarization, we reveal that: (i) The gateinjected cha… ▽ More We propose a direct experimental extraction technique for trapped charges and quantitative energy band diagrams in the FeFETs with metal-insulator-ferroelectric-insulator-semiconductor (MIFIS) structure, derived from the physical relationship between Vth and gate-side interlayer (G.IL) thickness. By decoupling trapped charges and ferroelectric polarization, we reveal that: (i) The gateinjected charges and channel-injected charges are excessive and maintain consistent ratios to ferroelectric polarization (~170% and ~130%, respectively). (ii) Retention loss originates from the detrapping of gate-injected charges rather than ferroelectric depolarization. (iii) As the G.IL thickens, the gate-injected charge de-trapping path transforms from gate-side to channel-side. To address the retention loss, careful material design, optimization, and bandgap engineering in the MIFIS structure are crucial. This work advances the understanding of high retention strategies for MIFIS-FeFETs in 3D FE NAND. △ Less

Submitted 16 October, 2025; originally announced October 2025.

Comments: 5 pages,10 figures

Design, waterproofing, and mass production of the 3-inch PMT frontend system of JUNO

Authors: Jilei Xu, Miao He, Cédric Cerna, Yongbo Huang, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Fengpeng An, Costas Andreopoulos, Giuseppe Andronico, João Pedro Athayde Marcondes de André, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Didier Auguste, Weidong Bai, Nikita Balashov, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Beretta, Antonio Bergnoli, Nikita Bessonov, Daniel Bick, Lukas Bieger , et al. (609 additional authors not shown)

Abstract: Over 25,600 3-inch photomultiplier tubes (PMTs) have been instrumented for the central detector of the Jiangmen Underground Neutrino Observatory. Each PMT is equipped with a high-voltage divider and a frontend cable with waterproof sealing. Groups of sixteen PMTs are connected to the underwater frontend readout electronics via specialized multi-channel waterproof connectors. This paper outlines th… ▽ More Over 25,600 3-inch photomultiplier tubes (PMTs) have been instrumented for the central detector of the Jiangmen Underground Neutrino Observatory. Each PMT is equipped with a high-voltage divider and a frontend cable with waterproof sealing. Groups of sixteen PMTs are connected to the underwater frontend readout electronics via specialized multi-channel waterproof connectors. This paper outlines the design and mass production processes for the high-voltage divider, the cable and connector, as well as the waterproof potting of the PMT bases. The results of the acceptance tests of all the integrated PMTs are also presented. △ Less

Submitted 22 January, 2026; v1 submitted 7 October, 2025; originally announced October 2025.

Conceptual Design Report of Super Tau-Charm Facility: The Accelerator

Authors: Jiancong Bao, Anton Bogomyagkov, Zexin Cao, Mingxuan Chang, Fangzhou Chen, Guanghua Chen, Qi Chen, Qushan Chen, Zhi Chen, Kuanjun Fan, Hailiang Gong, Duan Gu, Hao Guo, Tengjun Guo, Chongchao He, Tianlong He, Kaiwen Hou, Hao Hu, Tongning Hu, Xiaocheng Hu, Dazhang Huang, Pengwei Huang, Ruixuan Huang, Zhicheng Huang, Hangzhou Li , et al. (71 additional authors not shown)

Abstract: Electron-positron colliders operating in the GeV region of center-of-mass energies or the Tau-Charm energy region, have been proven to enable competitive frontier research, due to its several unique features. With the progress of high energy physics in the last two decades, a new-generation Tau-Charm factory, Super Tau Charm Facility (STCF) has been actively promoting by the particle physics commu… ▽ More Electron-positron colliders operating in the GeV region of center-of-mass energies or the Tau-Charm energy region, have been proven to enable competitive frontier research, due to its several unique features. With the progress of high energy physics in the last two decades, a new-generation Tau-Charm factory, Super Tau Charm Facility (STCF) has been actively promoting by the particle physics community in China. STCF holds great potential to address fundamental questions such as the essence of color confinement and the matter-antimatter asymmetry in the universe in the next decades. The main design goals of STCF are with a center-of-mass energy ranging from 2 to 7 GeV and a peak luminosity surpassing 5*10^34 cm^-2s^-1 that is optimized at a center-of-mass energy of 4 GeV, which is about 50 times that of the currently operating Tau-Charm factory - BEPCII. The STCF accelerator is composed of two main parts: a double-ring collider with the crab-waist collision scheme and an injector that provides top-up injections for both electron and positron beams. As a typical third-generation electron-positron circular collider, the STCF accelerator faces many challenges in both accelerator physics and technology. In this paper, the conceptual design of the STCF accelerator complex is presented, including the ongoing efforts and plans for technological R&D, as well as the required infrastructure. The STCF project aims to secure support from the Chinese central government for its construction during the 15th Five-Year Plan (2026-2030) in China. △ Less

Submitted 16 September, 2025; v1 submitted 14 September, 2025; originally announced September 2025.

Comments: 296 pages

A tunable FP Perot coupling interferometer on thin-film lithium niobate

Authors: Ayed Al Sayem, Heqing Huang, Ting-Chen Hu, Alaric Tate, Mark Cappuzzo, Rose Kopf, Mark Earnshaw

Abstract: We experimentally show an electro-optic tunable Fabry-Perot cavity on thin-film lithium niobate (TFLN). Instead of tuning the cavity phase and thus resonant frequency, we demonstrate modulation of the FP cavity by tuning the cavity mirrors via the electro-optic effect in the couplers. We enable full tuning of a low-Q FP cavity with only 3.5 V Vpi and a very short 3.5 mm long Mach-Zehnder interfero… ▽ More We experimentally show an electro-optic tunable Fabry-Perot cavity on thin-film lithium niobate (TFLN). Instead of tuning the cavity phase and thus resonant frequency, we demonstrate modulation of the FP cavity by tuning the cavity mirrors via the electro-optic effect in the couplers. We enable full tuning of a low-Q FP cavity with only 3.5 V Vpi and a very short 3.5 mm long Mach-Zehnder interferometer (MZI) mirror. △ Less

Submitted 9 September, 2025; v1 submitted 6 September, 2025; originally announced September 2025.

Towards Non-Invasive Sediment Monitoring Using Muography: A Pilot Run at the Shanghai Outer Ring Tunnel

Authors: Kim Siang Khaw, Siew Yan Hoh, Tianqi Hu, Xingyun Huang, Jun Kai Ng, Yusuke Takeuchi, Min Yang Tan, Jiangtao Wang, Yinghe Wang, Guan Ming Wong, Mengjie Wu, Ning Yan, Yonghao Zeng, Min Chen, Shunxi Gao, Lei Li, Yujin Shi, Jie Tan, Qinghua Wang, Siping Zeng, Shibin Yao, Yufu Zhang, Gongliang Chen, Houwang Wang, Jinxin Lin , et al. (1 additional authors not shown)

Abstract: This study demonstrates the application of cosmic-ray muography as a non-invasive method for monitoring sediment accumulation and tidal influences in the Shanghai Outer Ring Tunnel, an immersed tube tunnel located beneath the Huangpu River in Shanghai, China. A portable, dual-layer plastic scintillator detector was deployed to conduct muon flux scans along the tunnel's length and to continuously m… ▽ More This study demonstrates the application of cosmic-ray muography as a non-invasive method for monitoring sediment accumulation and tidal influences in the Shanghai Outer Ring Tunnel, an immersed tube tunnel located beneath the Huangpu River in Shanghai, China. A portable, dual-layer plastic scintillator detector was deployed to conduct muon flux scans along the tunnel's length and to continuously monitor muon flux, allowing for the study of tidal effects. Geant4 simulations validated the correlation between muon attenuation and overburden thickness, incorporating sediment, water, and concrete layers. Key findings include a strong anti-correlation between the measured muon flux and the water levels observed at a nearby tide gauge. The results align with geotechnical data and simulations, especially in the region of interest, confirming muography's sensitivity to sediment dynamics. This work establishes muography as a robust tool for long-term, real-time monitoring of submerged infrastructure, offering significant advantages over conventional invasive techniques. The study underscores the potential for integrating muography into civil engineering practices to enhance safety and operational resilience in tidal environments. △ Less

Submitted 18 August, 2025; v1 submitted 1 April, 2025; originally announced April 2025.

Comments: 22 pages, 13 figures, prepared for submission to the Journal of Applied Physics, Special Collection: Muography: Discoveries, Innovations, and Applications

Journal ref: J. Appl. Phys. 138, 114902 (2025)

Bayesian optimization of beam injection and storage in the PSI muEDM Experiment

Authors: Siew Yan Hoh, Yuzhi Shang, Ritwika Chakraborty, Tianqi Hu, Timothy Hume, Kim Siang Khaw, Philipp Schmidt-Wellenburg, Yusuke Takeuchi, Guan Ming Wong

Abstract: The muEDM experiment at the Paul Scherrer Institute aims to measure the electric dipole moment with an unprecedented sensitivity of $6 \times 10^{-23}\,\mathrm{e}\cdot\mathrm{cm}$. A key aspect of this experiment is the injection and storage of the muon beam, which traverses a long, narrow superconducting channel before entering a solenoid magnet. The muon is then kicked by a pulsed magnetic field… ▽ More The muEDM experiment at the Paul Scherrer Institute aims to measure the electric dipole moment with an unprecedented sensitivity of $6 \times 10^{-23}\,\mathrm{e}\cdot\mathrm{cm}$. A key aspect of this experiment is the injection and storage of the muon beam, which traverses a long, narrow superconducting channel before entering a solenoid magnet. The muon is then kicked by a pulsed magnetic field into a stable orbit within the solenoid's central region, where the electric dipole moment is measured. To study the beam injection and storage process, we developed a G4beamline simulation to model the dynamics of beam injection and storage, incorporating all relevant electric and magnetic fields. We subsequently employed a Bayesian optimization technique to improve the muon storage efficiency for Phase I of the muEDM experiment. The optimization is demonstrated using data simulated by G4beamline. We have observed an enhancement in the beam injection and storage efficiency, which increased to 0.556\% through the utilization of Bayesian optimization with Gaussian processes, compared to 0.324\% when employing the polynomial chaos expansion. This approach can be applied to adjust actual experimental parameters, aiding in achieving the desired performance for beam injection and storage in the muEDM experiment. △ Less

Submitted 18 June, 2025; v1 submitted 3 March, 2025; originally announced March 2025.

Comments: 24 pages, 10 figures

Simulation of the Background from $^{13}$C$(α, n)^{16}$O Reaction in the JUNO Scintillator

Authors: JUNO Collaboration, Thomas Adam, Kai Adamowicz, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Fengpeng An, Costas Andreopoulos, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Beretta, Antonio Bergnoli, Nikita Bessonov, Daniel Bick, Lukas Bieger, Svetlana Biktemerova , et al. (608 additional authors not shown)

Abstract: Large-scale organic liquid scintillator detectors are highly efficient in the detection of MeV-scale electron antineutrinos. These signal events can be detected through inverse beta decay on protons, which produce a positron accompanied by a neutron. A noteworthy background for antineutrinos coming from nuclear power reactors and from the depths of the Earth (geoneutrinos) is generated by ($α, n$)… ▽ More Large-scale organic liquid scintillator detectors are highly efficient in the detection of MeV-scale electron antineutrinos. These signal events can be detected through inverse beta decay on protons, which produce a positron accompanied by a neutron. A noteworthy background for antineutrinos coming from nuclear power reactors and from the depths of the Earth (geoneutrinos) is generated by ($α, n$) reactions. In organic liquid scintillator detectors, $α$ particles emitted from intrinsic contaminants such as $^{238}$U, $^{232}$Th, and $^{210}$Pb/$^{210}$Po, can be captured on $^{13}$C nuclei, followed by the emission of a MeV-scale neutron. Three distinct interaction mechanisms can produce prompt energy depositions preceding the delayed neutron capture, leading to a pair of events correlated in space and time within the detector. Thus, ($α, n$) reactions represent an indistinguishable background in liquid scintillator-based antineutrino detectors, where their expected rate and energy spectrum are typically evaluated via Monte Carlo simulations. This work presents results from the open-source SaG4n software, used to calculate the expected energy depositions from the neutron and any associated de-excitation products. Also simulated is a detailed detector response to these interactions, using a dedicated Geant4-based simulation software from the JUNO experiment. An expected measurable $^{13}$C$(α, n)^{16}$O event rate and reconstructed prompt energy spectrum with associated uncertainties, are presented in the context of JUNO, however, the methods and results are applicable and relevant to other organic liquid scintillator neutrino detectors. △ Less

Submitted 2 May, 2025; v1 submitted 2 March, 2025; originally announced March 2025.

Comments: 25 pages, 14 figures, 4 tables

Development of Fast Front-End Electronics for the Muon Trigger Detector in the PSI muEDM Experiment

Authors: Tianqi Hu, Guan Ming Wong, Diego Alejandro Sanz Becerra, Chavdar Dutsov, Siew Yan Hoh, Kim Siang Khaw, Philipp Schmidt-Wellenburg, Yuzhi Shang, Yusuke Takeuchi

Abstract: This paper outlines the design and development of a fast front-end electronic readout board for the muon trigger detector in the muEDM experiment at the Paul Scherrer Institute. The trigger detector, which consists of a gate and aperture detector, is strategically located at the end of the superconducting injection channel to generate trigger signals for a magnetic kicker, which activates upon the… ▽ More This paper outlines the design and development of a fast front-end electronic readout board for the muon trigger detector in the muEDM experiment at the Paul Scherrer Institute. The trigger detector, which consists of a gate and aperture detector, is strategically located at the end of the superconducting injection channel to generate trigger signals for a magnetic kicker, which activates upon the injection of muons into the central region of the storage solenoid. Within the magnetic field of the solenoid, the system configuration is optimized to meet stringent performance specifications, including minimal signal propagation delays, high detection efficiency, non-magnetic properties, and consistent operational stability under varying experimental conditions. Additionally, the design incorporates robust methods for rejecting positron contamination in the muon beamline. The results presented include performance evaluations from both bench testing and actual beam tests, highlighting the effectiveness and reliability of the electronic design. △ Less

Submitted 6 May, 2025; v1 submitted 16 February, 2025; originally announced February 2025.

Comments: 9 pages, 10 figures, submitted to IEEE Transactions on Nuclear Science

Journal ref: IEEE Transactions on Nuclear Science, vol. 72, no. 7, pp. 2229-2237, July 2025

A neuromorphic camera for tracking passive and active matter with lower data throughput

Authors: Gabriel Britto Monteiro, Megan Lim, Tiffany Cheow Yuen Tan, Avinash Upadhya, Zhuo Liang, Benjamin Agnew, Tomonori Hu, Benjamin J. Eggleton, Christopher Perrella, Kylie Dunning, Kishan Dholakia

Abstract: We demonstrate the merits of using a neuromorphic, or event-based camera (EBC), for tracking of both passive and active matter. For passive matter, we tracked the Brownian motion of different micro-particles and estimated their diffusion coefficient. For active matter, we explored the case of tracking murine spermatozoa and extracted motility parameters from the motion of cells. This has applicati… ▽ More We demonstrate the merits of using a neuromorphic, or event-based camera (EBC), for tracking of both passive and active matter. For passive matter, we tracked the Brownian motion of different micro-particles and estimated their diffusion coefficient. For active matter, we explored the case of tracking murine spermatozoa and extracted motility parameters from the motion of cells. This has applications in enhancing outcomes for clinical fertility treatments. Using the EBC, we obtain results equivalent to those from an sCMOS camera, yet achieve a reduction in file size of up to two orders of magnitude. This is important in the modern computer era, as it reduces data throughput, and is well-aligned with edge-computing applications. We believe the EBC is an excellent choice, particularly for long-term studies of active matter. △ Less

Submitted 14 January, 2025; v1 submitted 13 January, 2025; originally announced January 2025.

Journal ref: Laser Photonics Rev, e00106, (2025)

Beam test performance of a prototype muon trigger detector for the PSI muEDM experiment

Authors: Tianqi Hu, Jun Kai Ng, Guan Ming Wong, Cheng Chen, Kim Siang Khaw, Meng Lyu, Angela Papa, Philipp Schmidt-Wellenburg, David Staeger, Bastiano Vitali

Abstract: We report on the performance evaluation of a prototype muon trigger detector for the PSI muEDM experiment, conducted as a proof-of-principle test at the $π$E1 beamline of the Paul Scherrer Institute (PSI) using \SI{27.5}{MeV/c} muons. The detector is designed to identify muons within the acceptance phase space of a compact storage solenoid and activate a pulsed magnetic kicker for muon storage; it… ▽ More We report on the performance evaluation of a prototype muon trigger detector for the PSI muEDM experiment, conducted as a proof-of-principle test at the $π$E1 beamline of the Paul Scherrer Institute (PSI) using \SI{27.5}{MeV/c} muons. The detector is designed to identify muons within the acceptance phase space of a compact storage solenoid and activate a pulsed magnetic kicker for muon storage; it was tested without the application of a magnetic field. It comprises a telescope made up of four scintillators in anticoincidence with a gate scintillator, all read out by silicon photomultipliers. The study focused on characterizing the detector's response to various muon trajectories and the light yield of its plastic scintillators. Experimental results demonstrated strong agreement with Geant4 Monte Carlo simulations that incorporate optical photon modeling, confirming the detector's concept and its potential for meeting the stringent requirements of the muEDM experiment. △ Less

Submitted 6 May, 2025; v1 submitted 30 December, 2024; originally announced January 2025.

Comments: 22 pages, 16 figures, submitted to RDTM for review

Journal ref: Radiat Detect Technol Methods (2025)

AI-Enabled Rapid Assembly of Thousands of Defect-Free Neutral Atom Arrays with Constant-time-overhead

Authors: Rui Lin, Han-Sen Zhong, You Li, Zhang-Rui Zhao, Le-Tian Zheng, Tai-Ran Hu, Hong-Ming Wu, Zhan Wu, Wei-Jie Ma, Yan Gao, Yi-Kang Zhu, Zhao-Feng Su, Wan-Li Ouyang, Yu-Chen Zhang, Jun Rui, Ming-Cheng Chen, Chao-Yang Lu, Jian-Wei Pan

Abstract: Assembling increasingly larger-scale defect-free optical tweezer-trapped atom arrays is essential for quantum computation and quantum simulations based on atoms. Here, we propose an AI-enabled, rapid, constant-time-overhead rearrangement protocol, and we experimentally assemble defect-free 2D and 3D atom arrays with up to 2024 atoms with a constant time cost of 60 ms. The AI model calculates the h… ▽ More Assembling increasingly larger-scale defect-free optical tweezer-trapped atom arrays is essential for quantum computation and quantum simulations based on atoms. Here, we propose an AI-enabled, rapid, constant-time-overhead rearrangement protocol, and we experimentally assemble defect-free 2D and 3D atom arrays with up to 2024 atoms with a constant time cost of 60 ms. The AI model calculates the holograms for real-time atom rearrangement. With precise controls over both position and phase, a high-speed spatial light modulator moves all the atoms simultaneously. This protocol can be readily used to generate defect-free arrays of tens of thousands of atoms with current technologies, and become a useful toolbox for quantum error correction. △ Less

Submitted 19 December, 2024; originally announced December 2024.

Journal ref: Phys. Rev. Lett. 135, 060602 (2025)

Acousto-optic modulation based on an AlScN microring resonator for microwave-to-optical conversion

Authors: Kewei Bian, Yushuai Liu, Weilin Rong, Yuan Dong, Qize Zhong, Yang Qiu, Xingyan Zhao, Tao Wu, Shaonan Zheng, Ting Hu

Abstract: Acoustic-optic (AO) modulation is critical for microwave and optical signal processing, computing and networking. Challenges remain to integrate AO devices on-chip using fabrication process compatible with complementary metal-oxide-semiconductor (CMOS) technology. This work presents the demonstration of an AO modulator exploiting a microring resonator (MRR) based on thin-film aluminum scandium nit… ▽ More Acoustic-optic (AO) modulation is critical for microwave and optical signal processing, computing and networking. Challenges remain to integrate AO devices on-chip using fabrication process compatible with complementary metal-oxide-semiconductor (CMOS) technology. This work presents the demonstration of an AO modulator exploiting a microring resonator (MRR) based on thin-film aluminum scandium nitride (AlScN) photonic platform. Leveraging the high piezoelectric properties of AlScN, an MRR is employed with interdigital transducer (IDT) inside to couple microwave signals into acoustic resonant modes, enabling efficient by-directional optical modulation in the MRR. The fabricated MRR exhibits an optical loaded quality factor (Q) of 1.8*e4 at the optical L-band for the TE00 mode. A low effective half-wave voltage Vpi of 1.21 V is achieved, corresponding to a VpiL of 0.0242 Vcm, along with an optomechanical single-photon coupling strength g0 of 0.43 kHz between the 2.11 GHz acoustic mode and the TE00 optical mode. The device shows potential for applications in microwave photonics. △ Less

Submitted 23 November, 2024; originally announced November 2024.

Comments: 11 pages, 5 figures

Harris Dispersion Relation and Bernstein Modes in Dense Magnetized Quantum Plasmas

Authors: T. X. Hu, D. Wu, J. Zhang

Abstract: The Bernstein wave is a well-known electrostatic eigen-mode in magnetized plasmas, and it is of broad connection to multiple disciplines, such as controlled nuclear fusions and astrophysics. In this work, we extend the Bernstein mode from classical to quantum plasmas by means of the quantum kinetic theory in a self-consistent manner, and especially the quantum version of the Harris dispersion rela… ▽ More The Bernstein wave is a well-known electrostatic eigen-mode in magnetized plasmas, and it is of broad connection to multiple disciplines, such as controlled nuclear fusions and astrophysics. In this work, we extend the Bernstein mode from classical to quantum plasmas by means of the quantum kinetic theory in a self-consistent manner, and especially the quantum version of the Harris dispersion relation is derived. The studied quantum effects appear in the form of pseudo-differential operators (\textgreek{Y}DO) in the formula, which are exactly solved using numerical methods. Furthermore, by utilizing the magnetized equilibrium Wigner function, Landau quantization and finite temperature effects are rigorously contained. It is found that behaviours of the quantum Bernstein wave departure significantly from its classical counterpart, especially when $\hbarω_{\mathrm{c}}$ is of the same order of the Fermi energy. △ Less

Submitted 18 November, 2024; originally announced November 2024.

Effect of Top Al$_2$O$_3$ Interlayer Thickness on Memory Window and Reliability of FeFETs With TiN/Al$_2$O$_3$/Hf$_{0.5}$Zr$_{0.5}$O$_2$/SiO$_x$/Si (MIFIS) Gate Structure

Authors: Tao Hu, Xinpei Jia, Runhao Han, Jia Yang, Mingkai Bai, Saifei Dai, Zeqi Chen, Yajing Ding, Shuai Yang, Kai Han, Yanrong Wang, Jing Zhang, Yuanyuan Zhao, Xiaoyu Ke, Xiaoqing Sun, Junshuai Chai, Hao Xu, Xiaolei Wang, Wenwu Wang, Tianchun Ye

Abstract: We investigate the effect of top Al2O3 interlayer thickness on the memory window (MW) of Si channel ferroelectric field-effect transistors (Si-FeFETs) with TiN/Al$_2$O$_3$/Hf$_{0.5}$Zr$_{0.5}$O$_2$/SiO$_x$/Si (MIFIS) gate structure. We find that the MW first increases and then remains almost constant with the increasing thickness of the top Al2O3. The phenomenon is attributed to the lower electric… ▽ More We investigate the effect of top Al2O3 interlayer thickness on the memory window (MW) of Si channel ferroelectric field-effect transistors (Si-FeFETs) with TiN/Al$_2$O$_3$/Hf$_{0.5}$Zr$_{0.5}$O$_2$/SiO$_x$/Si (MIFIS) gate structure. We find that the MW first increases and then remains almost constant with the increasing thickness of the top Al2O3. The phenomenon is attributed to the lower electric field of the ferroelectric Hf$_{0.5}$Zr$_{0.5}$O$_2$ in the MIFIS structure with a thicker top Al2O3 after a program operation. The lower electric field makes the charges trapped at the top Al2O3/Hf0.5Zr0.5O$_2$ interface, which are injected from the metal gate, cannot be retained. Furthermore, we study the effect of the top Al$_2$O$_3$ interlayer thickness on the reliability (endurance characteristics and retention characteristics). We find that the MIFIS structure with a thicker top Al$_2$O$_3$ interlayer has poorer retention and endurance characteristics. Our work is helpful in deeply understanding the effect of top interlayer thickness on the MW and reliability of Si-FeFETs with MIFIS gate stacks. △ Less

Submitted 13 November, 2024; originally announced November 2024.

Comments: 7 pages, 12 figures

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Impact of the Top SiO2 Interlayer Thickness on Memory Window of Si Channel FeFET with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) Gate Structure

Authors: Tao Hu, Xianzhou Shao, Mingkai Bai, Xinpei Jia, Saifei Dai, Xiaoqing Sun, Runhao Han, Jia Yang, Xiaoyu Ke, Fengbin Tian, Shuai Yang, Junshuai Chai, Hao Xu, Xiaolei Wang, Wenwu Wang, Tianchun Ye

Abstract: We study the impact of top SiO2 interlayer thickness on the memory window (MW) of Si channel ferroelectric field-effect transistor (FeFET) with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) gate structure. We find that the MW increases with the increasing thickness of the top SiO2 interlayer, and such an increase exhibits a two-stage linear dependence. The physical origin is the presence of the different… ▽ More We study the impact of top SiO2 interlayer thickness on the memory window (MW) of Si channel ferroelectric field-effect transistor (FeFET) with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) gate structure. We find that the MW increases with the increasing thickness of the top SiO2 interlayer, and such an increase exhibits a two-stage linear dependence. The physical origin is the presence of the different interfacial charges trapped at the top SiO2/Hf0.5Zr0.5O2 interface. Moreover, we investigate the dependence of endurance characteristics on initial MW. We find that the endurance characteristic degrades with increasing the initial MW. By inserting a 3.4 nm SiO2 dielectric interlayer between the gate metal TiN and the ferroelectric Hf0.5Zr0.5O2, we achieve a MW of 6.3 V and retention over 10 years. Our work is helpful in the device design of FeFET. △ Less

Submitted 16 June, 2024; originally announced June 2024.

Comments: 6 pages, 12 figures. arXiv admin note: substantial text overlap with arXiv:2404.15825

Silicon-integrated scandium-doped aluminum nitride electro-optic modulator

Authors: Tianqi Xu, Yushuai Liu, Yuanmao Pu, Yongxiang Yang, Qize Zhong, Xingyan Zhao, Yang Qiu, Yuan Dong, Tao Wu, Shaonan Zheng, Ting Hu

Abstract: Scandium-doped aluminum nitride (AlScN) with an asymmetric hexagonal wurtzite structure exhibits enhanced second-order nonlinear and piezoelectric properties compared to aluminum nitride (AlN), while maintaining a relatively large bandgap. It provides a promising platform for photonic integration and facilitates the seamless integration of passive and active functional devices. Here, we present th… ▽ More Scandium-doped aluminum nitride (AlScN) with an asymmetric hexagonal wurtzite structure exhibits enhanced second-order nonlinear and piezoelectric properties compared to aluminum nitride (AlN), while maintaining a relatively large bandgap. It provides a promising platform for photonic integration and facilitates the seamless integration of passive and active functional devices. Here, we present the design, fabrication, and characterization of AlScN EO micro-ring modulators, introducing active functionalities to the chip-scale AlScN platform. These waveguide-integrated EO modulators employ sputtered AlScN thin films as the light-guiding medium, and the entire fabrication process is compatible with complementary metal oxide semiconductor (CMOS) technology. We characterize the high-frequency performance of an AlScN modulator for the first time, extracting a maximum in-device effective EO coefficient of 2.86 pm/V at 12 GHz. The devices show a minimum half-wave voltage-length product of 3.12 V*cm and a 3-dB modulation bandwidth of approximately 22 GHz. Our work provides a promising modulation scheme for cost-effective silicon-integrated photonics systems. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Prediction of Energy Resolution in the JUNO Experiment

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Kai Adamowicz, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta, Antonio Bergnoli, Daniel Bick , et al. (629 additional authors not shown)

Abstract: This paper presents an energy resolution study of the JUNO experiment, incorporating the latest knowledge acquired during the detector construction phase. The determination of neutrino mass ordering in JUNO requires an exceptional energy resolution better than 3\% at 1~MeV. To achieve this ambitious goal, significant efforts have been undertaken in the design and production of the key components o… ▽ More This paper presents an energy resolution study of the JUNO experiment, incorporating the latest knowledge acquired during the detector construction phase. The determination of neutrino mass ordering in JUNO requires an exceptional energy resolution better than 3\% at 1~MeV. To achieve this ambitious goal, significant efforts have been undertaken in the design and production of the key components of the JUNO detector. Various factors affecting the detection of inverse beta decay signals have an impact on the energy resolution, extending beyond the statistical fluctuations of the detected number of photons, such as the properties of the liquid scintillator, performance of photomultiplier tubes, and the energy reconstruction algorithm. To account for these effects, a full JUNO simulation and reconstruction approach is employed. This enables the modeling of all relevant effects and the evaluation of associated inputs to accurately estimate the energy resolution. The results of study reveal an energy resolution of 2.95\% at 1~MeV. Furthermore, this study assesses the contribution of major effects to the overall energy resolution budget. This analysis serves as a reference for interpreting future measurements of energy resolution during JUNO data collection. Moreover, it provides a guideline for comprehending the energy resolution characteristics of liquid scintillator-based detectors. △ Less

Submitted 9 January, 2025; v1 submitted 28 May, 2024; originally announced May 2024.

Journal ref: Chinese Phys. C 49 013003 (2025)

A practical approach of measuring $^{238}$U and $^{232}$Th in liquid scintillator to sub-ppq level using ICP-MS

Authors: Yuanxia Li, Jie Zhao, Yayun Ding, Tao Hu, Jiaxuan Ye, Jian Fang, Liangjian Wen

Abstract: Liquid scintillator (LS) is commonly utilized in experiments seeking rare events due to its high light yield, transparency, and radiopurity. The concentration of $^{238}$U and $^{232}$Th in LS consistently remains below 1 ppq (10$^{-15}$ g/g), and the current screening result is based on a minimum 20-ton detector. Inductively coupled plasma mass (ICP-MS) spectroscopy is well-regarded for its high… ▽ More Liquid scintillator (LS) is commonly utilized in experiments seeking rare events due to its high light yield, transparency, and radiopurity. The concentration of $^{238}$U and $^{232}$Th in LS consistently remains below 1 ppq (10$^{-15}$ g/g), and the current screening result is based on a minimum 20-ton detector. Inductively coupled plasma mass (ICP-MS) spectroscopy is well-regarded for its high sensitivity to trace $^{238}$U and $^{232}$Th. This study outlines a method for detecting $^{238}$U and $^{232}$Th in LS at the sub-ppq level using ICP-MS, involving the enrichment of $^{238}$U/$^{232}$Th from the LS through acid extraction. With meticulous cleanliness control, $^{238}$U/$^{232}$Th in approximately 2 kg of LS is concentrated by acid extraction with 0.4 (0.3) pg $^{238}$U ($^{232}$Th) contamination. Three standard adding methods are employed to assess recovery efficiency, including radon daughter, 2,5-diphenyloxazole (PPO), and natural non-existent $^{233}$U/$^{229}$Th. The method detection limit at a 99% confidence level of this approach can reach approximately 0.2-0.3 ppq for $^{238}$U/$^{232}$Th with nearly 100% recovery efficiency. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Journal ref: Radiation Physics and Chemistry 230 (2025) 112579

Impact of Top SiO2 interlayer Thickness on Memory Window of Si Channel FeFET with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) Gate Structure

Authors: Tao Hu, Xianzhou Shao, Mingkai Bai, Xinpei Jia, Saifei Dai, Xiaoqing Sun, Runhao Han, Jia Yang, Xiaoyu Ke, Fengbin Tian, Shuai Yang, Junshuai Chai, Hao Xu, Xiaolei Wang, Wenwu Wang, Tianchun Ye

Abstract: We study the impact of top SiO2 interlayer thickness on memory window of Si channel FeFET with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) gate structure. The memory window increases with thicker top SiO2. We realize the memory window of 6.3 V for 3.4 nm top SiO2. Moreover, we find that the endurance characteristic degrades with increasing the initial memory window. We study the impact of top SiO2 interlayer thickness on memory window of Si channel FeFET with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) gate structure. The memory window increases with thicker top SiO2. We realize the memory window of 6.3 V for 3.4 nm top SiO2. Moreover, we find that the endurance characteristic degrades with increasing the initial memory window. △ Less

Submitted 24 April, 2024; originally announced April 2024.

Comments: 4 page 7 figures

Ion Kinetics and Neutron Generation Associated with Electromagnetic Turbulence in Laboratory-scale Counter-streaming Plasmas

Authors: P. Liu, D. Wu, T. X. Hu, D. W. Yuan, G. Zhao, Z. M. Sheng, X. T. He, J. Zhang

Abstract: Electromagnetic turbulence and ion kinetics in counter-streaming plasmas hold great significance in laboratory astrophysics, such as turbulence field amplification and particle energization. Here, we quantitatively demonstrate for the first time how electromagnetic turbulence affects ion kinetics under achievable laboratory conditions (millimeter-scale interpenetrating plasmas with initial velocit… ▽ More Electromagnetic turbulence and ion kinetics in counter-streaming plasmas hold great significance in laboratory astrophysics, such as turbulence field amplification and particle energization. Here, we quantitatively demonstrate for the first time how electromagnetic turbulence affects ion kinetics under achievable laboratory conditions (millimeter-scale interpenetrating plasmas with initial velocity of $2000\ \mathrm{km/s}$, density of $4 \times 10^{19}\ \mathrm{cm}^{-3}$, and temperature of $100\ \mathrm{eV}$) utilizing a recently developed high-order implicit particle-in-cell code without scaling transformation. It is found that the electromagnetic turbulence is driven by ion two-stream and filamentation instabilities. For the magnetized scenarios where an applied magnetic field of tens of Tesla is perpendicular to plasma flows, the growth rates of instabilities increase with the strengthening of applied magnetic field, which therefore leads to a significant enhancement of turbulence fields. Under the competition between the stochastic acceleration due to electromagnetic turbulence and collisional thermalization, ion distribution function shows a distinct super-Gaussian shape, and the ion kinetics are manifested in neutron yields and spectra. Our results have well explained the recent unmagnetized experimental observations, and the findings of magnetized scenario can be verified by current astrophysical experiments. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Comments: Accepted by Phys. Rev. Lett. on 12 Mar

Extended Time-Dependent Density Functional Theory for Multi-Body Densities

Authors: Jiong-Hang Liang, Tian-Xing Hu, D. Wu, Zheng-Mao Sheng, J. Zhang

Abstract: Time-dependent density functional theory (TDDFT) is widely used for understanding and predicting properties and behaviors of matter. As one of the fundamental theorems in TDDFT, van Leeuwen's theorem [Phys. Rev. Lett. 82, 3863 (1999)] guarantees how to construct a unique potential with the same one-body density evolution. Here we extend van Leeuwen's theorem by exploring truncation criteria in BBG… ▽ More Time-dependent density functional theory (TDDFT) is widely used for understanding and predicting properties and behaviors of matter. As one of the fundamental theorems in TDDFT, van Leeuwen's theorem [Phys. Rev. Lett. 82, 3863 (1999)] guarantees how to construct a unique potential with the same one-body density evolution. Here we extend van Leeuwen's theorem by exploring truncation criteria in BBGKY-hierarchy. Our generalized theorem demonstrates the existence of a unique non-local potential to accurately reconstruct the multi-body density evolution in binary interacting systems. Under non-stringent conditions, truncation of the BBGKY-hierarchy equations aligns with the behavior of multi-body density evolution, and maintains consistency in the reduced equations. As one of applications within the extended TDDFT supported by our theorem, multiple excitation energy can be typically solved as the eigenvalue of a generalized Casida's equation. The extended TDDFT provides an accurate and first-principle framework capable of describing the kinetic processes of correlated system, including strongly coupled particle transport, multiple excitation and ionization processes. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Exact Normal Modes of Quantum Plasmas

Authors: Tian-Xing Hu, Dong Wu, Z. M. Sheng, J. Zhang

Abstract: The normal modes, i.e., the eigen solutions to the dispersion relation equation, are the most fundamental properties of a plasma, which also of key importance to many nonlinear effects such as parametric and two-plasmon decay, and Raman scattering. The real part indicates the intrinsic oscillation frequency while the imaginary part the Landau damping rate. In most of the literatures, the normal mo… ▽ More The normal modes, i.e., the eigen solutions to the dispersion relation equation, are the most fundamental properties of a plasma, which also of key importance to many nonlinear effects such as parametric and two-plasmon decay, and Raman scattering. The real part indicates the intrinsic oscillation frequency while the imaginary part the Landau damping rate. In most of the literatures, the normal modes of quantum plasmas are obtained by means of small damping approximation (SDA), which is invalid for high-$k$ modes. In this paper, we solve the exact dispersion relations via the analytical continuation (AC) scheme, and, due to the multi-value nature of the Fermi-Dirac distribution, reformation of the complex Riemann surface is required. It is found that the change of the topological shape of the root locus in quantum plasmas is quite different from classical plasmas, in which both real and imaginary frequencies of high-$k$ modes increase with $k$ in a steeper way than the typical linear behaviour as appears in classical plasmas. As a result, the temporal evolution of a high-$k$ perturbation in quantum plasmas is dominated by the ballistic modes. △ Less

Submitted 22 January, 2024; originally announced January 2024.

Validation of Classical Transport Cross Section for Ion-Ion Interactions Under Repulsive Yukawa Potential

Authors: Tian-Xing Hu, Dong Wu, C. L. Lin, Z. M. Sheng, B. He, J. Zhang

Abstract: Value of cross section is a fundamental parameter to depict the transport of charged particles in matters. Due to masses of orders of magnitude higher than electrons and convenience of realistic calculation, the cross section of elastic nuclei-nuclei collision is usually treated via classical mechanics. The famous Bohr criterion was firstly proposed to judge whether the treatment via classical mec… ▽ More Value of cross section is a fundamental parameter to depict the transport of charged particles in matters. Due to masses of orders of magnitude higher than electrons and convenience of realistic calculation, the cross section of elastic nuclei-nuclei collision is usually treated via classical mechanics. The famous Bohr criterion was firstly proposed to judge whether the treatment via classical mechanics is reliable or not. Later, Lindhard generalized the results of Coulomb to screening potentials. Considering the increasing importance of detailed ion-ion interactions under modern simulation codes in inertial confinement fusion (ICF) researches, the validation of classical transport cross section for ion-ion interactions in a big range of parameter space is certainly required. In this work, the transport cross sections via classical mechanics under repulsive Yukawa potential are compared with those via quantum mechanics. Differences of differential cross sections are found with respect to scattering angles and velocities. Our results generally indicate that the classical picture fails at the cases of both low and high velocities, which represent a significant extension of the famous Bohr criterion and its generalized variations. Furthermore, the precise validation zones of classical picture is also analysed in this work. This work is of significant importance for benchmarking the modern ion-kinetic simulation codes in ICF researches, concerning the stopping power of $α$ particles in DT fuels, ion-ion friction and viscous effects in the formation of kinetic shocks. △ Less

Submitted 22 January, 2024; originally announced January 2024.

Enlargement of Memory Window of Si Channel FeFET by Inserting Al2O3 Interlayer on Ferroelectric Hf0.5Zr0.5O2

Authors: Tao Hu, Xiaoqing Sun, Mingkai Bai, Xinpei Jia, Saifei Dai, Tingting Li, Runhao Han, Yajing Ding, Hongyang Fan, Yuanyuan Zhao, Junshuai Chai, Hao Xu, Mengwei Si, Xiaolei Wang, Wenwu Wang

Abstract: In this work, we demonstrate the enlargement of the memory window of Si channel FeFET with ferroelectric Hf0.5Zr0.5O2 by gate-side dielectric interlayer engineering. By inserting an Al2O3 dielectric interlayer between TiN gate metal and ferroelectric Hf0.5Zr0.5O2, we achieve a memory window of 3.2 V with endurance of ~105 cycles and retention over 10 years. The physical origin of memory window enl… ▽ More In this work, we demonstrate the enlargement of the memory window of Si channel FeFET with ferroelectric Hf0.5Zr0.5O2 by gate-side dielectric interlayer engineering. By inserting an Al2O3 dielectric interlayer between TiN gate metal and ferroelectric Hf0.5Zr0.5O2, we achieve a memory window of 3.2 V with endurance of ~105 cycles and retention over 10 years. The physical origin of memory window enlargement is clarified to be charge trapping at the Al2O3/Hf0.5Zr0.5O2 interface, which has an opposite charge polarity to the trapped charges at the Hf0.5Zr0.5O2/SiOx interface. △ Less

Submitted 28 December, 2023; originally announced December 2023.

Comments: 3 pages,6 figures;

Unveiling the origins of quasi-phase matching spectral imperfections in thin-film lithium niobate frequency doublers

Authors: Jie Zhao, Xiaoting Li, Ting-Chen Hu, Ayed Al Sayem, Haochuan Li, Al Tate, Kwangwoong Kim, Rose Kopf, Pouria Sanjari, Mark Earnshaw, Nicolas K. Fontaine, Cheng Wang, Andrea Blanco-Redondo

Abstract: Thin-film lithium niobate (TFLN) based frequency doublers have been widely recognized as essential components for both classical and quantum optical communications. Nonetheless, the efficiency of these devices is hindered by imperfections present in the quasi-phase matching (QPM) spectrum. In this study, we present a thorough analysis of the spectral imperfections in TFLN frequency doublers with v… ▽ More Thin-film lithium niobate (TFLN) based frequency doublers have been widely recognized as essential components for both classical and quantum optical communications. Nonetheless, the efficiency of these devices is hindered by imperfections present in the quasi-phase matching (QPM) spectrum. In this study, we present a thorough analysis of the spectral imperfections in TFLN frequency doublers with varying lengths, ranging from 5 mm to 15 mm. Employing a non-destructive diagnostic method based on scattered light imaging, we identify the sources and waveguide sections that contribute to the imperfections in the QPM spectrum. Furthermore, by mapping the TFLN film thickness across the entire waveguiding regions, we successfully reproduce the QPM spectra numerically, thus confirming the prominent influence of film thickness variations on the observed spectral imperfections. This comprehensive investigation provides valuable insights into the identification and mitigation of spectral imperfections in TFLN-based frequency doublers, paving the way toward the realization of nonlinear optical devices with enhanced efficiency and improved spectral fidelity. △ Less

Submitted 13 July, 2023; originally announced July 2023.

Design of a vector multi-foci metalens for full stokes imaging polarimetry

Authors: Shuyi Wang, Tie Hu, Shichuan Wang, Ming Zhao, Zhenyu Yang

Abstract: Imaging polarimetry based on dielectric metasurface is well-known for its ultra-compactness and high integration. However, previous works suffer from low energy efficiency, limited restrictions on choice of target polarization states, or inability to focus light. Here, by inverse design, we numerically demonstrate a multi-foci metalens-based polarimetry that can simultaneously separate and focus t… ▽ More Imaging polarimetry based on dielectric metasurface is well-known for its ultra-compactness and high integration. However, previous works suffer from low energy efficiency, limited restrictions on choice of target polarization states, or inability to focus light. Here, by inverse design, we numerically demonstrate a multi-foci metalens-based polarimetry that can simultaneously separate and focus the four free-chosen elliptical polarization states at the wavelength of 10.6 μm. Such a full-stokes polarimetry features an average absolute efficiency up to 54.63%, and an average relative error as low as 0.00137%. This spatial-multiplexing-free full stokes polarimetry exceeds the theoretical maximum efficiency of traditional polarization-filtering counterparts, and resolves the restriction faced by the orthogonal polarization-multiplexed method. △ Less

Submitted 4 July, 2023; originally announced July 2023.

Status of the muEDM experiment at PSI

Authors: Kim Siang Khaw, Cheng Chen, Massimo Giovannozzi, Tianqi Hu, Meng Lv, Jun Kai Ng, Angela Papa, Philipp Schmidt-Wellenburg, Bastiano Vitali, Guan Ming Wong

Abstract: Permanent electric dipole moments (EDMs) are excellent probes of physics beyond the Standard Model, especially on new sources of CP violation. The muon EDM has recently attracted significant attention due to discrepancies in the magnetic anomaly of the muon, as well as potential violations of lepton-flavor universality in B-meson decays. At the Paul Scherrer Institute in Switzerland, we have propo… ▽ More Permanent electric dipole moments (EDMs) are excellent probes of physics beyond the Standard Model, especially on new sources of CP violation. The muon EDM has recently attracted significant attention due to discrepancies in the magnetic anomaly of the muon, as well as potential violations of lepton-flavor universality in B-meson decays. At the Paul Scherrer Institute in Switzerland, we have proposed a muon EDM search experiment employing the frozen-spin technique, where a radial electric field is exerted within a storage solenoid to cancel the muon's anomalous spin precession. Consequently, the EDM signal can be inferred from the upstream-downstream asymmetry of the decay positron count versus time. The experiment is planned to take place in two phases, anticipating an annual statistical sensitivity of $3\times10^{-21}$ $e\cdot$cm for Phase~I, and $6\times10^{-23}$ $e\cdot$cm for Phase~II. Going beyond $10^{-21}$ $e\cdot$cm will enable us to probe various Standard Model extensions. △ Less

Submitted 4 July, 2023; originally announced July 2023.

Comments: 7 pages, 2 figures, The 23rd International Workshop on Neutrinos from Accelerators (NuFact 2022)

A surface-normal photodetector as nonlinear activation function in diffractive optical neural networks

Authors: Farshid Ashtiani, Mohamad Hossein Idjadi, Ting-Chen Hu, Stefano Grillanda, David Neilson, Mark Earnshaw, Mark Cappuzzo, Rose Kopf, Alaric Tate, Andrea Blanco-Redondo

Abstract: Optical neural networks (ONNs) enable high speed parallel and energy efficient processing compared to conventional digital electronic counterparts. However, realizing large scale systems is an open problem. Among various integrated and non-integrated ONNs, free-space diffractive ONNs benefit from a large number of pixels of spatial light modulators to realize millions of neurons. However, a signif… ▽ More Optical neural networks (ONNs) enable high speed parallel and energy efficient processing compared to conventional digital electronic counterparts. However, realizing large scale systems is an open problem. Among various integrated and non-integrated ONNs, free-space diffractive ONNs benefit from a large number of pixels of spatial light modulators to realize millions of neurons. However, a significant fraction of computation time and energy is consumed by the nonlinear activation function that is typically implemented using a camera sensor. Here, we propose a novel surface-normal photodetector (SNPD) with a nonlinear response to replace the camera sensor that enables about three orders of magnitude faster (5.7 us response time) and more energy efficient (less than 10 nW/pixel) response. Direct efficient vertical optical coupling, polarization insensitivity, inherent nonlinearity with no control electronics, low optical power requirements, and the possibility of implementing large scale arrays make the SNPD a promising nonlinear activation function for diffractive ONNs. To show the applicability, successful classification simulation of MNIST and Fashion MNIST datasets using the measured response of SNPD with accuracy comparable to that of an ideal ReLU function are demonstrated. △ Less

Submitted 5 May, 2023; originally announced May 2023.

A high-efficiency proton-boron fusion scheme taking into account the effects of quantum degeneracy

Authors: S. J. Liu, D. Wu, T. X. Hu, T. Y. Liang, X. C. Ning, J. H. Liang, Y. C. Liu, P. Liu, X. Liu, Z. M. Sheng, Y. T. Zhao, D. H. H. Hoffmann, X. T. He, J. Zhang

Abstract: The proton-boron (p-$^{11}$B) reaction is regarded as the holy grail of advanced fusion fuels, since the primary reaction produces three $α$ particles with few neutrons and induced radio-activities from second order reactions. Compared to the Deuterium-Tritium reaction a much higher reaction temperature is required. Moreover, bremsstrahlung energy losses due to the high nuclear charge of boron dee… ▽ More The proton-boron (p-$^{11}$B) reaction is regarded as the holy grail of advanced fusion fuels, since the primary reaction produces three $α$ particles with few neutrons and induced radio-activities from second order reactions. Compared to the Deuterium-Tritium reaction a much higher reaction temperature is required. Moreover, bremsstrahlung energy losses due to the high nuclear charge of boron deem it seemingly apparent than a fusion reactor based on Deuterium-Tritium plasma in equilibrium is to say the least very difficult.It is becoming more appealing to collide intense laser beams or accelerated proton beams with a boron target to produce p-$^{11}$B reactions. The fusion yield of p-$^{11}$B reactions is closely related to proton beam parameters and boron target conditions such as density, temperature, and ingredients. Quantum degeneracy will increase fusion yields by reducing the stopping power of injected protons. In this work, we suggest a high-efficiency scheme for beam-target p-$^{11}$B fusions via injecting a MeV proton beam into a highly compressed quantum degenerated boron target. Such a boron target can be achieved via quasi-isentropic compression of solid boron by using precisely shaped laser pulses. Our results indicate that for densities ranging from $10^3$ to $10^4ρ_s$, where $ρ_s$ is the density of solid boron, contributions of bound and free electrons to the stopping of protons can be completely disregarded and dramatically reduced respectively. The result is an increase in fusion yield by orders of magnitude. Furthermore, in order to achieve multiplication factor $F$ greater than one, with $F$ defined as the ratio of output fusion energy to the energy of injected protons, it is found there exits a minimum possible density of boron target, which is $2.15 \times 10^4 ρ_s$ when the kinetic energy of injected protons is $0.8$ MeV. △ Less

Submitted 17 April, 2023; originally announced April 2023.

The JUNO experiment Top Tracker

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato , et al. (592 additional authors not shown)

Abstract: The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector… ▽ More The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: 20 pages

Journal ref: Nucl.Instrum.Meth.A 1057 (2023) 168680

JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta , et al. (592 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Solving High-Dimensional PDEs with Latent Spectral Models

Authors: Haixu Wu, Tengge Hu, Huakun Luo, Jianmin Wang, Mingsheng Long

Abstract: Deep models have achieved impressive progress in solving partial differential equations (PDEs). A burgeoning paradigm is learning neural operators to approximate the input-output mappings of PDEs. While previous deep models have explored the multiscale architectures and various operator designs, they are limited to learning the operators as a whole in the coordinate space. In real physical science… ▽ More Deep models have achieved impressive progress in solving partial differential equations (PDEs). A burgeoning paradigm is learning neural operators to approximate the input-output mappings of PDEs. While previous deep models have explored the multiscale architectures and various operator designs, they are limited to learning the operators as a whole in the coordinate space. In real physical science problems, PDEs are complex coupled equations with numerical solvers relying on discretization into high-dimensional coordinate space, which cannot be precisely approximated by a single operator nor efficiently learned due to the curse of dimensionality. We present Latent Spectral Models (LSM) toward an efficient and precise solver for high-dimensional PDEs. Going beyond the coordinate space, LSM enables an attention-based hierarchical projection network to reduce the high-dimensional data into a compact latent space in linear time. Inspired by classical spectral methods in numerical analysis, we design a neural spectral block to solve PDEs in the latent space that approximates complex input-output mappings via learning multiple basis operators, enjoying nice theoretical guarantees for convergence and approximation. Experimentally, LSM achieves consistent state-of-the-art and yields a relative gain of 11.5% averaged on seven benchmarks covering both solid and fluid physics. Code is available at https://github.com/thuml/Latent-Spectral-Models. △ Less

Submitted 29 May, 2023; v1 submitted 29 January, 2023; originally announced January 2023.

Direct van der Waals simulation (DVS) of phase-transforming fluids

Authors: Tianyi Hu, Hao Wang, Hector Gomez

Abstract: We present the method of Direct van der Waals simulation (DVS) to study computationally flows with liquid-vapor phase transformations. Our approach is based on a novel discretization of the Navier-Stokes-Korteweg equations, that couple flow dynamics with van der Waals' non-equilibrium thermodynamic theory of phase transformations, and opens an opportunity for first-principles simulation of a wide… ▽ More We present the method of Direct van der Waals simulation (DVS) to study computationally flows with liquid-vapor phase transformations. Our approach is based on a novel discretization of the Navier-Stokes-Korteweg equations, that couple flow dynamics with van der Waals' non-equilibrium thermodynamic theory of phase transformations, and opens an opportunity for first-principles simulation of a wide range of boiling and cavitating flows. The proposed algorithm enables unprecedented simulations of the Navier-Stokes-Korteweg equations involving cavitating flows at strongly under-critical conditions and $\mathcal{O}(10^5)$ Reynolds number. The proposed technique provides a pathway for fundamental understanding of phase-transforming flows with multiple applications in science, engineering, and medicine. △ Less

Submitted 4 December, 2022; originally announced December 2022.

A centimeter-scale achromatic hybrid metalens with polarization-insensitivity in the visible

Authors: Tie Hu, Shengqi Wang, Yunxuan Wei, Liqing Wen, Xing Feng, Ming Zhao, Zhenyu Yang

Abstract: Metalenses, featuring ultra-compactness and CMOS compatibility, are limited by the compromise between the diameter, numerical aperture, and working waveband. To address this problem, we propose and numerically demonstrate a centimeter-scale metasurface-refractive hybrid metalens working in the band of 440 - 700 nm. Revisiting the general Snell law, we present the phase profile of a chromatic aberr… ▽ More Metalenses, featuring ultra-compactness and CMOS compatibility, are limited by the compromise between the diameter, numerical aperture, and working waveband. To address this problem, we propose and numerically demonstrate a centimeter-scale metasurface-refractive hybrid metalens working in the band of 440 - 700 nm. Revisiting the general Snell law, we present the phase profile of a chromatic aberration correction metasurface that can apply to a plano-convex refractive lens of an arbitrary surface type. Simulated by our semi-vector method, the designed achromatic hybrid metalens achieves 81% chromatic aberration suppression and polarization insensitivity. Broadband imaging results of the hybrid metalens are further provided, verifying the achromatism of the designed hybrid metalens. It can find applications in camera lenses and other optical systems that need compact, high-performance lenses. △ Less

Submitted 31 October, 2022; originally announced October 2022.

Comments: 10 pages, 5 figures,

Unveiling the spontaneous conversion of layered MAX phases to 2D MXenes

Authors: Tao Hu, Shihao Zhu, Zhaojin Li, Da Li, Hongyang Liu, Chao Zhang, Xiaohui Wang

Abstract: Topochemically transforming layered non-van der Waals solid into two dimensional (2D) materials involves selective etching reactions with atomic precision. The element-specific, structure-sensitive etching at nanoscale urgently requires in-depth understanding. Here, by means of density functional theory calculations and a laboratory-made operando reaction monitoring platform, the mechanism of inst… ▽ More Topochemically transforming layered non-van der Waals solid into two dimensional (2D) materials involves selective etching reactions with atomic precision. The element-specific, structure-sensitive etching at nanoscale urgently requires in-depth understanding. Here, by means of density functional theory calculations and a laboratory-made operando reaction monitoring platform, the mechanism of instantaneous transforming MAX phase into MXenes is unraveled. The overall etching kinetics exhibits a sigmoidal curve, following self-accelerating reaction character with a small activation energy of ca. 60 kJ/mol. Interestingly, this activation energy corresponds to the Al transport through Ti3C2 slits. Therefore the reaction of Al with hydrofluoric acid solution in the confined interlayer space is recognized as the rate-determining step. Last but not the least, we found that the match of A element and etchants to form stable products is critical for the etching reaction, and reaction energy derived from the thermodynamics provides an easy yet effective descriptor for screening efficient etchants. △ Less

Submitted 18 May, 2025; v1 submitted 5 August, 2022; originally announced August 2022.

Comments: The gas volumes presented in Figures 4 and 5 appear to correlate with the extent of material reaction; however, the sample volume and mass data are unavailable