-
Epitaxial SiGeSn alloys for CMOS-compatible thermoelectric devices
Authors:
Patrizio Graziosi,
Damiano Marian,
Andrea Tomadin,
Stefano Roddaro,
Omar Concepción,
Johnny Tiscareño-Ramírez,
Agnieszka Anna Corley-Wiciak,
Dan Buca,
Giovanni Capellini,
Michele Virgilio
Abstract:
The integration of thermoelectric devices into mainstream microelectronic technological platform could be a major breakthrough in various fields within the \emph{so-called} Green-IT realm. In this article, the thermoelectric properties of heteroepitaxial SiGeSn alloys, a novel CMOS compatible material system, are evaluated to assess their possible application in thermoelectric devices. To this pur…
▽ More
The integration of thermoelectric devices into mainstream microelectronic technological platform could be a major breakthrough in various fields within the \emph{so-called} Green-IT realm. In this article, the thermoelectric properties of heteroepitaxial SiGeSn alloys, a novel CMOS compatible material system, are evaluated to assess their possible application in thermoelectric devices. To this purpose, starting from the experimentally low lattice thermal conductivity of SiGeSn/Ge/Si layers of about $\sim$1-2 W/m$\cdot$K assessed by means of 3-$ω$ measurements, the figure of merits are calculated through the use of Boltzmann transport equation, taking into account the relevant inter-valley scattering processes, peculiar of this multi-valley material system. Values for the figure of merit $ZT$ exceeding $1$ have been obtained for both p- and n- type material at operating temperatures within the 300---400 K range, i.e. at a typical On-Chip temperatures. In this interval, the predicted power factor also features very competitive values of the order of 20 $\rm{μW/cm\cdot K^2}$. Our finding indicates that this new class of Si-based materials has extremely good prospects for real-world applications, and can further stimulate scientific investigation in this ambit.
△ Less
Submitted 4 August, 2026;
originally announced August 2026.
-
Hopping transport regimes and dimensionality transition: a unified Monte Carlo Random Resistor Network approach
Authors:
Alejandro Toral-Lopez,
Damiano Marian,
Gianluca Fiori
Abstract:
Hopping transport, characterized by carrier tunneling between localized states, is a key mechanism in disordered materials such as organic semiconductors, perovskites, nitride alloys, and 2D material-based inks. Two main regimes are typically observed: Variable Range Hopping and Nearest Neighbor Hopping, with a transition between them upon temperature variation. Despite numerous experimental obser…
▽ More
Hopping transport, characterized by carrier tunneling between localized states, is a key mechanism in disordered materials such as organic semiconductors, perovskites, nitride alloys, and 2D material-based inks. Two main regimes are typically observed: Variable Range Hopping and Nearest Neighbor Hopping, with a transition between them upon temperature variation. Despite numerous experimental observations, the modeling of this transition remain insufficiently explored and not fully understood. In this work, we present an in-house Monte Carlo Random Resistor Network-based simulator capable of capturing both hopping transport regimes. We demonstrate how material properties that define the network, such as localization length and the spatial and energetic distribution of sites, determine the dominant transport regime. The simulator has been successfully validated against experimental data, showing excellent agreement, reproducing the transition from one regime to the other and accurately capturing 1D, 2D and 3D variable range hopping behavior, providing both a theoretical framework for interpreting experiments and a powerful tool for studying transport mechanisms.
△ Less
Submitted 3 January, 2026;
originally announced January 2026.
-
Optical spin pumping in silicon
Authors:
Stefano Achilli,
Damiano Marian,
Mario Lodari,
Emiliano Bonera,
Giordano Scappucci,
Jacopo Pedrini,
Michele Virgilio,
Fabio Pezzoli
Abstract:
The generation of an out-of-equilibrium population of spin-polarized carriers is a keystone process for quantum technologies and spintronics alike. It can be achieved through the so-called optical spin orientation by exciting the material with circularly polarized light. Although this is an established technique for studying direct band-gap semiconductors, it has been proven limited in materials l…
▽ More
The generation of an out-of-equilibrium population of spin-polarized carriers is a keystone process for quantum technologies and spintronics alike. It can be achieved through the so-called optical spin orientation by exciting the material with circularly polarized light. Although this is an established technique for studying direct band-gap semiconductors, it has been proven limited in materials like Si that possess weak oscillator strengths for the optical transitions. In this study, we address the problem by presenting an all-optical analog of the spin pumping method. This involves the optical creation of a non-equilibrium spin population within an absorber, which subsequently transfers spin-polarized carriers to a nearby indirect gap semiconductor, resulting in polarized emission from the latter. By applying this concept to a Ge-on-Si heterostructure we observe luminescence from Si with an unrivaled polarization degree as high as 9%. The progressive etching of the absorbing layer, assisted by magneto-optic experiments, allows us to ascertain that the polarized emission is determined by effective spin injection aided by the carrier lifetime shortening due to extended defects. These findings can facilitate the use of highly promising spin-dependent phenomena of Si, whose optical exploitation has thus far been hampered by fundamental limitations associated with its peculiar electronic structure.
△ Less
Submitted 11 June, 2025;
originally announced June 2025.
-
Direct Dark Matter searches with Metal Halide Perovskites
Authors:
Davide Baiocco,
Damiano Marian,
Giulio Marino,
Paolo Panci,
Marco Polini,
Alessandro Tredicucci
Abstract:
Polar materials with optical phonons in the meV range are excellent candidates for both dark matter direct detection (via dark photon-mediated scattering) and light dark matter absorption. In this study, we propose, for the first time, the metal halide perovskites MAPbI$_3$, MAPbCl$_3$, and CsPbI$_3$ for these purposes. Our findings reveal that CsPbI$_3$ is the best material, significantly improvi…
▽ More
Polar materials with optical phonons in the meV range are excellent candidates for both dark matter direct detection (via dark photon-mediated scattering) and light dark matter absorption. In this study, we propose, for the first time, the metal halide perovskites MAPbI$_3$, MAPbCl$_3$, and CsPbI$_3$ for these purposes. Our findings reveal that CsPbI$_3$ is the best material, significantly improving exclusion limits compared to other polar materials. For scattering, CsPbI$_3$ can probe dark matter masses down to the keV range. For absorption, it enhances sensitivity to detect dark photon masses below $\sim 10~{\rm meV}$. The only material which has so far been investigated and that could provide competitive bounds is CsI, which, however, is challenging to grow in kilogram-scale sizes due to its considerably lower stability compared to CsPbI$_3$. Moreover, CsI is isotropic while the anisotropic structure of CsPbI$_3$ enables daily modulation analysis, showing that a significant percentage of daily modulation exceeding 1% is achievable for dark matter masses below $40~{\rm keV}$.
△ Less
Submitted 3 February, 2025;
originally announced February 2025.
-
Roadmap on Quantum Magnetic Materials
Authors:
Antonija Grubišić-Čabo,
Marcos H. D. Guimarães,
Dmytro Afanasiev,
Jose H. Garcia Aguilar,
Irene Aguilera,
Mazhar N. Ali,
Semonti Bhattacharyya,
Yaroslav M. Blanter,
Rixt Bosma,
Zhiyuan Cheng,
Zhiying Dan,
Saroj P. Dash,
Joaquín Medina Dueñas,
Joaquín Fernandez-Rossier,
Marco Gibertini,
Sergii Grytsiuk,
Maurits J. A. Houmes,
Anna Isaeva,
Chrystalla Knekna,
Arnold H. Kole,
Samer Kurdi,
Jose Lado,
Samuel Mañas-Valero,
J. Marcelo J. Lopes,
Damiano Marian
, et al. (14 additional authors not shown)
Abstract:
Fundamental research on two-dimensional (2D) magnetic systems based on van der Waals materials has been gaining traction rapidly since their recent discovery. With the increase of recent knowledge, it has become clear that such materials have also a strong potential for applications in devices that combine magnetism with electronics, optics, and nanomechanics. Nonetheless, many challenges still la…
▽ More
Fundamental research on two-dimensional (2D) magnetic systems based on van der Waals materials has been gaining traction rapidly since their recent discovery. With the increase of recent knowledge, it has become clear that such materials have also a strong potential for applications in devices that combine magnetism with electronics, optics, and nanomechanics. Nonetheless, many challenges still lay ahead. Several fundamental aspects of 2D magnetic materials are still unknown or poorly understood, such as their often-complicated electronic structure, optical properties, and magnetization dynamics, and their magnon spectrum. To elucidate their properties and facilitate integration in devices, advanced characterization techniques and theoretical frameworks need to be developed or adapted. Moreover, developing synthesis methods which increase critical temperatures and achieve large-scale, high-quality homogeneous thin films is crucial before these materials can be used for real-world applications. Therefore, the field of 2D magnetic materials provides many challenges and opportunities for the discovery and exploration of new phenomena, as well as the development of new applications. This Roadmap presents the background, challenges, and potential research directions for various relevant topics in the field on the fundamentals, synthesis, characterization, and applications. We hope that this work can provide a strong starting point for young researchers in the field and provide a general overview of the key challenges for more experienced researchers.
△ Less
Submitted 23 December, 2024;
originally announced December 2024.
-
Strain-induced valley transport in CrBr$_3$/WSe$_2$/CrBr$_3$ van der Waals heterostructure
Authors:
David Soriano,
Damiano Marian,
Prabhat Dubey,
Gianluca Fiori
Abstract:
Two dimensional magnetic materials are at the forefront of the next generation of spintronic devices. The possibility to interface them with other van der Waals materials such as transition metal dichalcogenides has opened new possibilities for the observation of new and exiting physical phenomena. Here, we present a proof-of-concept valleytronic device based on CrBr$_3$-encapsulated WSe$_2$ showi…
▽ More
Two dimensional magnetic materials are at the forefront of the next generation of spintronic devices. The possibility to interface them with other van der Waals materials such as transition metal dichalcogenides has opened new possibilities for the observation of new and exiting physical phenomena. Here, we present a proof-of-concept valleytronic device based on CrBr$_3$-encapsulated WSe$_2$ showing an unprecedented valley splitting of $\sim 100$ meV under compressive strain of the WSe$_2$, able to be tuned by the relative magnetization of the encapsulating layers. Multiscale transport simulations performed on this device show a spin-valley current with a polarization higher than 80$\%$ than is maintained in a range of $\sim$ 0.3 V gate voltage in a field-effect transistor configuration. The impact of the stacking configuration on the valley splitting is also evaluated.
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
CVD Graphene Contacts for Lateral Heterostructure MoS${_2}$ Field Effect Transistors
Authors:
Daniel S. Schneider,
Leonardo Lucchesi,
Eros Reato,
Zhenyu Wang,
Agata Piacentini,
Jens Bolten,
Damiano Marian,
Enrique G. Marin,
Aleksandra Radenovic,
Zhenxing Wang,
Gianluca Fiori,
Andras Kis,
Giuseppe Iannaccone,
Daniel Neumaier,
Max C. Lemme
Abstract:
Intensive research is carried out on two-dimensional materials, in particular molybdenum disulfide, towards high-performance transistors for integrated circuits. Fabricating transistors with ohmic contacts is challenging due to the high Schottky barrier that severely limits the transistors' performance. Graphene-based heterostructures can be used in addition or as a substitute for unsuitable metal…
▽ More
Intensive research is carried out on two-dimensional materials, in particular molybdenum disulfide, towards high-performance transistors for integrated circuits. Fabricating transistors with ohmic contacts is challenging due to the high Schottky barrier that severely limits the transistors' performance. Graphene-based heterostructures can be used in addition or as a substitute for unsuitable metals. We present lateral heterostructure transistors made of scalable chemical vapor-deposited molybdenum disulfide and chemical vapor-deposited graphene with low contact resistances of about 9 k$Ω$$μ$m and high on/off current ratios of 10${^8}$. We also present a theoretical model calibrated on our experiments showing further potential for scaling transistors and contact areas into the few nanometers range and the possibility of a strong performance enhancement by means of layer optimizations that would make transistors promising for use in future logic circuits.
△ Less
Submitted 5 April, 2024; v1 submitted 3 April, 2023;
originally announced April 2023.
-
Lateral Heterostructure Field-Effect Transistors Based on 2D-Material Stacks With Varying Thickness and Energy Filtering Source
Authors:
Enrique G. Marin,
Damiano Marian,
Marta Perucchini,
Gianluca Fiori,
Giuseppe Iannaccone
Abstract:
The bandgap dependence on the number of atomic layers of some families of 2D-materials, can be exploited to engineer and use lateral heterostructures (LHs) as high-performance Field-Effect Transistors (FET). This option can provide very good lattice matching as well as high heterointerface quality. More importantly, this bandgap modulation with layer stacking can give rise to steep transitions in…
▽ More
The bandgap dependence on the number of atomic layers of some families of 2D-materials, can be exploited to engineer and use lateral heterostructures (LHs) as high-performance Field-Effect Transistors (FET). This option can provide very good lattice matching as well as high heterointerface quality. More importantly, this bandgap modulation with layer stacking can give rise to steep transitions in the density of states (DOS) of the 2D material, that can eventually be used to achieve sub-60 mV/decade subthreshold swing in LH-FETs thanks to an energy-filtering source. We have observed this effect in the case of a PdS2 LH-FET due to the particular density of states of its bilayer configuration. Our results are based on ab initio and multiscale materials and device modeling, and incite the exploration of the 2D-material design space in order to find more abrupt DOS transitions and better suitable candidates.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Physical insights into the operation of a 1-nm gate length transistor based on MoS2 with metallic carbon nanotube gate
Authors:
Marta Perucchini,
Enrique G. Marin,
Damiano Marian,
Giuseppe Iannaccone,
Gianluca Fiori
Abstract:
Low-dimensional materials such as layered semiconductors or carbon nanotubes (CNTs) have been attracting increasing attention in the last decades due to their inherent scaling properties, which become fundamental to sustain the scaling in electronic devices. Inspired by recent experimental results (S.B. Desai, S.R. Madhvapathy, A.B. Sachid, J.P. Llinas, Q. Wang, G.H. Ahn, G. Pitner, M.J. Kim, J. B…
▽ More
Low-dimensional materials such as layered semiconductors or carbon nanotubes (CNTs) have been attracting increasing attention in the last decades due to their inherent scaling properties, which become fundamental to sustain the scaling in electronic devices. Inspired by recent experimental results (S.B. Desai, S.R. Madhvapathy, A.B. Sachid, J.P. Llinas, Q. Wang, G.H. Ahn, G. Pitner, M.J. Kim, J. Bokor, C. Hu, H.-S. P. Wong, and A. Javey, Science 354, 99 (2016)), in this work we examined the ultimate performance of of MoS$_2$-channel Field Effect Transistors with 1-nm gate length by means of quantum transport simulations based on Poisson equation and Non-equilibrium Green's function formalism. We considered uniformly scaled devices, with channel lengths ranging from 5 to 20 nm controlled by a cylindrical gate with a 1-nm diameter, as would be required in realistic integrated circuits. Moreover, we also evaluated the effect of the finite density of states of a carbon nanotube gate on the loss of device performance. We noticed that the sub-threshold swing for all short-channel structures was greater than the ideal limit of thermionic devices and we attributed this to the presence of tunneling currents and gate-drain interactions. We tailored the transistor architecture in order to improve the gate control. We concluded that the limited CNT-channel capacitive coupling poses severe limitations on the operation and thus exploitation of the device.
△ Less
Submitted 20 April, 2019;
originally announced April 2019.
-
Tunnel-Field-Effect Spin Filter from Two-Dimensional Antiferromagnetic Stanene
Authors:
Enrique G. Marin,
Damiano Marian,
Giuseppe Iannaccone,
Gianluca Fiori
Abstract:
We propose a device concept, based on monolayer stanene, able to provide highly polarized spin currents (up to a $98\%$) with voltage-controlled spin polarization operating at room temperature and with small operating voltage ($0.3$ V). The concept exploits the presence of spin-polarized edge states in a stanene nanoribbon. The spin polarization of the total current can be modulated by a different…
▽ More
We propose a device concept, based on monolayer stanene, able to provide highly polarized spin currents (up to a $98\%$) with voltage-controlled spin polarization operating at room temperature and with small operating voltage ($0.3$ V). The concept exploits the presence of spin-polarized edge states in a stanene nanoribbon. The spin polarization of the total current can be modulated by a differential tuning of the transmission properties, and of the occupation of edge states of different spin, via the application of an in-plane electric field. We demonstrate device operation using ab-initio and quantum transport simulations.
△ Less
Submitted 19 April, 2019;
originally announced April 2019.
-
Laser-beam patterned topological insulating states on thin semiconducting MoS2
Authors:
H. Mine,
A. Kobayashi,
T. Nakamura,
T. Inoue,
S. Pakdel,
E. Z. Marin,
D. Marian,
E. Gonzalez-Marin,
S. Maruyama,
S. Katsumoto,
A. Fortunelli,
J. J. Palacios,
J. Haruyama
Abstract:
Identifying the two-dimensional (2D) topological insulating (TI) state in new materials and its control are crucial aspects towards the development of voltage-controlled spintronic devices with low power dissipation. Members of the 2D transition metal dichalcogenides (TMDCs) have been recently predicted and experimentally reported as a new class of 2D TI materials, but in most cases edge conductio…
▽ More
Identifying the two-dimensional (2D) topological insulating (TI) state in new materials and its control are crucial aspects towards the development of voltage-controlled spintronic devices with low power dissipation. Members of the 2D transition metal dichalcogenides (TMDCs) have been recently predicted and experimentally reported as a new class of 2D TI materials, but in most cases edge conduction seems fragile and limited to the monolayer phase fabricated on specified substrates. Here, we realize the controlled patterning of the 1T'-phase embedded into the 2H-phase of thin semiconducting molybdenum-disulfide (MoS2) by laser beam irradiation. Integer fractions of the quantum of resistance, the dependence on laser-irradiation conditions, magnetic field, and temperature, as well as the bulk gap observation by scanning tunneling spectroscopy and theoretical calculations indicate the presence of the quantum spin Hall phase in our patterned 1T' phases.
△ Less
Submitted 2 September, 2019; v1 submitted 13 July, 2018;
originally announced July 2018.
-
First principle investigation of Tunnel FET based on nanoribbons from topological two-dimensional material
Authors:
Enrique G. Marin,
Damiano Marian,
Giuseppe Iannaccone,
Gianluca Fiori
Abstract:
We explore nanoribbons from topological two-dimensional stanene as channel material in tunnel field effect transistors. This novel technological option offers the possibility to build pure one-dimensional (1D) channel devices (comprised of a 1D chain of atoms) due to localized states in correspondence of the nanoribbon edges. The investigation is based on first-principle calculations and multi-sca…
▽ More
We explore nanoribbons from topological two-dimensional stanene as channel material in tunnel field effect transistors. This novel technological option offers the possibility to build pure one-dimensional (1D) channel devices (comprised of a 1D chain of atoms) due to localized states in correspondence of the nanoribbon edges. The investigation is based on first-principle calculations and multi-scale transport simulations to assess devices performance against industry requirements and their robustness with respect to technological issues like line edge roughness, detrimental for nanoribbons. We will show that edges states are robust with respect to the presence of non-idealities (e.g., atoms vacancies at the edges), and that 1D-channel TFETs exhibit interesting potential for digital applications and room for optimization in order to improve the Ion/Ioff at the levels required by the ITRS, while opening a path for the exploration of new device concepts at the ultimate scaling limits.
△ Less
Submitted 10 April, 2018;
originally announced April 2018.
-
Transistor concepts based on lateral heterostructures of metallic and semiconducting phases of MoS$_2$
Authors:
Damiano Marian,
Elias Dib,
Teresa Cusati,
Enrique G. Marin,
Alessandro Fortunelli,
Giuseppe Iannaccone,
Gianluca Fiori
Abstract:
In this paper we propose two transistor concepts based on lateral heterostructures of monolayer MoS$_2$, composed of adjacent regions of 1T (metallic) and 2H (semiconducting) phases, inspired by recent research showing the possibility to obtain such heterostructures by electron beam irradiation. The first concept, the lateral heterostructure field-effect transistor, exhibits potential of better pe…
▽ More
In this paper we propose two transistor concepts based on lateral heterostructures of monolayer MoS$_2$, composed of adjacent regions of 1T (metallic) and 2H (semiconducting) phases, inspired by recent research showing the possibility to obtain such heterostructures by electron beam irradiation. The first concept, the lateral heterostructure field-effect transistor, exhibits potential of better performance with respect to the foreseen evolution of CMOS technology, both for high performance and low power applications. Performance potential has been evaluated by means of detailed multi-scale materials and device simulations. The second concept, the planar barristor, also exhibits potential competitive performance with CMOS, and an improvement of orders of magnitude in terms of the main figures of merit with respect to the recently proposed vertical barristor.
△ Less
Submitted 31 March, 2018;
originally announced April 2018.
-
BITLLES: Electron Transport Simulation with Quantum Trajectories
Authors:
Guillermo Albareda,
Damiano Marian,
Abdelilah Benali,
Alfonso Alarcón,
Simeon Moises,
Xavier Oriols
Abstract:
After the seminal work of R. Landauer in 1957 relating the electrical resistance of a conductor to its scattering properties, much progress has been made in our ability to predict the performance of electron devices in the DC (stationary) regime. Computational tools to describe their dynamical behavior (including the AC, transient and noise performance), however, are far from being as trustworthy…
▽ More
After the seminal work of R. Landauer in 1957 relating the electrical resistance of a conductor to its scattering properties, much progress has been made in our ability to predict the performance of electron devices in the DC (stationary) regime. Computational tools to describe their dynamical behavior (including the AC, transient and noise performance), however, are far from being as trustworthy as would be desired by the electronic industry. While there is no fundamental limitation to correctly modeling the high-frequency quantum transport and its fluctuations, certainly more careful attention must be paid to delicate issues such as overall charge neutrality, total current conservation, or the back action of the measuring apparatus. In this review, we will show how the core ideas behind the Bohmian formulation of quantum mechanics can be exploited to design an efficient Monte Carlo algorithm that provides a quantitative description of electron transport in open quantum systems. By making the most of trajectory-based and wave function methods, the BITLLES simulator, a free software developed by the authors, extends the capabilities that the semi-classical Monte Carlo simulation technique has offered for decades (DC, AC, noise, transients) to the quantum regime.
△ Less
Submitted 21 September, 2016;
originally announced September 2016.
-
On the noise induced by the measurement of the THz electrical current in quantum devices
Authors:
Damiano Marian,
Nino Zanghì,
Xavier Oriols
Abstract:
From a quantum point of view, it is mandatory to include the measurement process when predicting the time-evolution of a quantum system. In this paper, a model to treat the measurement of the (TeraHertz) THz electrical current in quantum devices is presented. The explicit interaction of a quantum system with an external measuring apparatus is analyzed through the unambiguous notion of the Bohmian…
▽ More
From a quantum point of view, it is mandatory to include the measurement process when predicting the time-evolution of a quantum system. In this paper, a model to treat the measurement of the (TeraHertz) THz electrical current in quantum devices is presented. The explicit interaction of a quantum system with an external measuring apparatus is analyzed through the unambiguous notion of the Bohmian conditional wave function, the wave function of a subsystem. It it shown that such THz quantum measurement process can be modeled as a weak measurement: The systems suffers a small perturbation due to the apparatus, but the current is measured with a great uncertainty. This uncertainty implies that a new source of noise appears at THz frequencies. Numerical (quantum Monte Carlo) experiments are performed confirming the weak character of this measurement. This work also indicates that at low frequencies this noise is negligible and it can be ignored. From a classical point of view, the origin of this noise due to the measurement at THz frequencies can be attributed to the plasmonic effect of those electrons at the contacts (by interpreting the contacts themselves as part of the measuring apparatus).
△ Less
Submitted 21 February, 2016;
originally announced February 2016.
-
Time-dependent simulation of particle and displacement currents in THz graphene transistors
Authors:
Z. Zhan,
E. Colomès,
A. Benali,
D. Marian,
X. Oriols
Abstract:
Although time-independent models provide very useful dynamical information with a reduced computational burden, going beyond the quasi-static approximation provides enriched information when dealing with TeraHertz (THz) frequencies. In this work, the THz noise of dual-gate graphene transistors with DC polarization is analyzed from a careful simulation of the time-dependent particle and displacemen…
▽ More
Although time-independent models provide very useful dynamical information with a reduced computational burden, going beyond the quasi-static approximation provides enriched information when dealing with TeraHertz (THz) frequencies. In this work, the THz noise of dual-gate graphene transistors with DC polarization is analyzed from a careful simulation of the time-dependent particle and displacement currents. From such currents, the power spectral density (PSD) of the total current fluctuations are computed at the source, drain and gate contacts. The role of the lateral dimensions of the transistors, the Klein tunneling and the positive-negative energy injection on the PSD are analyzed carefully. Through the comparison of the PSD with and without Band-to-Band tunneling and graphene injection, it is shown that the unavoidable Klein tunneling and positive-negative energy injection in graphene structures imply an increment of noise without similar increment on the current, degrading the (either low or high frequency) signal-to-noise ratio. Finally, it is shown that the shorter the vertical height (in comparison with the length of the active region in the transport direction), the larger the maximum frequency of the PSD. As a byproduct of this result, an alternative strategy (without length scaling) to optimize the intrinsic cut-off frequency of graphene transistors is envisioned.
△ Less
Submitted 11 December, 2015; v1 submitted 16 November, 2015;
originally announced November 2015.
-
Weak Values from Displacement Currents in Multiterminal Electron Devices
Authors:
Damiano Marian,
Nino Zanghì,
Xavier Oriols
Abstract:
Weak values allow the measurement of observables associated with noncommuting operators. Up to now, position-momentum weak values have been mainly developed for (relativistic) photons. In this Letter, a proposal for the measurement of such weak values in typical electronic devices is presented. Inspired by the Ramo-Shockley-Pellegrini theorem that provides a relation between current and electron v…
▽ More
Weak values allow the measurement of observables associated with noncommuting operators. Up to now, position-momentum weak values have been mainly developed for (relativistic) photons. In this Letter, a proposal for the measurement of such weak values in typical electronic devices is presented. Inspired by the Ramo-Shockley-Pellegrini theorem that provides a relation between current and electron velocity, it is shown that the displacement current measured in multiterminal configurations can provide either a weak measurement of the momentum or strong measurement of position. This proposal opens new opportunities for fundamental and applied physics with state-of-the-art electronic technology. As an example, a setup for the measurement of the Bohmian velocity of (nonrelativistic) electrons is presented and tested with numerical experiments.
△ Less
Submitted 2 June, 2016; v1 submitted 2 August, 2015;
originally announced August 2015.
-
Quantum Noise from a Bohmian perspective: fundamental understanding and practical computation in electron devices
Authors:
Damiano Marian,
Enrique Colomés,
Zhen Zhan,
Xavier Oriols
Abstract:
In the literature, the study of electron transport in quantum devices is mainly devoted to DC properties. The fluctuations of the electrical current around these DC values, the so-called quantum noise, are much less analyzed. The computation of quantum noise is intrinsically linked (by temporal correlations) to our ability to understand/compute the time-evolution of a quantum system that is measur…
▽ More
In the literature, the study of electron transport in quantum devices is mainly devoted to DC properties. The fluctuations of the electrical current around these DC values, the so-called quantum noise, are much less analyzed. The computation of quantum noise is intrinsically linked (by temporal correlations) to our ability to understand/compute the time-evolution of a quantum system that is measured several times. There are several quantum theories that provide different (but empirically equivalent) ways of understanding/computing the perturbation of the wave function when it is measured. In this work, quantum noise associated to an electron impinging upon a semitransparent barrier is explained using Bohmian mechanics (which deals with wave functions and point-like particles). From this result, the fundamental understanding and practical computation of quantum noise with Bohmian trajectories are discussed. Numerical simulations of low and high frequency features of quantum shot noise in a resonant tunneling diode are presented (through the BITLLES simulator), showing the usefulness of the Bohmian approach.
△ Less
Submitted 10 March, 2015; v1 submitted 2 October, 2014;
originally announced October 2014.