Showing 1–50 of 109 results for author: Gu, W

Operation and performance of ProtoDUNE Dual Phase liquid argon time projection chamber

Authors: DUNE Collaboration, S. Abbaslu, F. Abd Alrahman, A. Abed Abud, R. Acciarri, L. P. Accorsi, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, K. Adhikari, C. Adriano, K. Agudelo-Jaramillo, F. Akbar, F. Alemanno, N. S. Alex, L. Aliaga Soplin, A. Alqaisi, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, R. Amarinei , et al. (1341 additional authors not shown)

Abstract: ProtoDUNE-DP was the largest ever built Liquid Argon Time Projection Chamber (LArTPC) operating in Dual-Phase (DP) mode, with a liquid target and charge read-out placed in the gas. It had an active volume of $6\times6\times6$\,m$^3$ corresponding to an active mass of 300\,t (total LAr mass of 720\,t), constructed at the CERN Neutrino Platform and took data from 2019 to 2020 with cosmic muons. In P… ▽ More ProtoDUNE-DP was the largest ever built Liquid Argon Time Projection Chamber (LArTPC) operating in Dual-Phase (DP) mode, with a liquid target and charge read-out placed in the gas. It had an active volume of $6\times6\times6$\,m$^3$ corresponding to an active mass of 300\,t (total LAr mass of 720\,t), constructed at the CERN Neutrino Platform and took data from 2019 to 2020 with cosmic muons. In ProtoDUNE-DP the electric drift field is oriented in the vertical direction, causing the electrons to drift vertically towards the anode at the top. The ionization charge is then extracted into the gaseous argon above the liquid surface, amplified by Townsend avalanches, and collected by the charge readout planes. The detector experienced significant technical problems affecting the long-term operation of the Charge Readout Planes, formed by the Large Electron Multipliers, but other critical segments demonstrated required performance including the delivery of -300 kV to the TPC cathode, verification of replaceable charge read-out electronics, and operation of the photon detection system. ProtoDUNE-DP experience resulted in improved designs of the Vertical Drift LArTPC. △ Less

Submitted 21 July, 2026; v1 submitted 17 July, 2026; originally announced July 2026.

Comments: 103 pages, 66 figures

Report number: FERMILAB-PUB-26-0466-LBNF

Characterizing the energy resolution of the MicroBooNE LArTPC at the MeV scale using monoenergetic features of $^{208}$Tl decays

Authors: MicroBooNE collaboration, P. Abratenko, D. Andrade Aldana, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, A. Barnard, G. Barr, D. Barrow, J. Barrow, V. Basque, J. Bateman, B. Behera, O. Benevides Rodrigues, S. Berkman, A. Bhat, M. Bhattacharya, V. Bhelande, A. Binau, M. Bishai, A. Blake, B. Bogart, T. Bolton, M. B. Brunetti , et al. (167 additional authors not shown)

Abstract: A detailed understanding of the capabilities and fidelity of low-energy reconstruction is crucial for taking advantage of MeV-scale neutrino physics opportunities in liquid argon time projection chambers (LArTPCs). This study presents a measurement of the resolution of reconstructed energy in the MicroBooNE LArTPC at $\approx 1.5$ MeV. The characterization is performed using monoenergetic signals… ▽ More A detailed understanding of the capabilities and fidelity of low-energy reconstruction is crucial for taking advantage of MeV-scale neutrino physics opportunities in liquid argon time projection chambers (LArTPCs). This study presents a measurement of the resolution of reconstructed energy in the MicroBooNE LArTPC at $\approx 1.5$ MeV. The characterization is performed using monoenergetic signals generated by $2.614$ MeV $γ$-rays from $^{208}$Tl decays undergoing pair production in the detector. The resolution is found to be ($7.52 \pm 0.78 \text{(stat)} \pm 0.92 \text{(syst)}$)%. This value is consistent with the MicroBooNE simulation prediction of ($9.70 \pm 0.65 \text{(stat)}$)% at the $1.6 σ$ level. This study represents the first ever measurement of LArTPC energy resolution at the MeV scale and provides a pathway for monoenergetic energy calibrations in future experiments using LArTPC detectors. △ Less

Submitted 17 August, 2026; v1 submitted 28 May, 2026; originally announced May 2026.

Comments: 15 pages, 9 figures, and 2 tables

Report number: FERMILAB-PUB-26-0288

Aurora Hunter: A Two-Stage Framework for Probabilistic Visibility Forecasting

Authors: Zongyuan Ge, Chenwaner Zhang, Haoyang Li, Hantai Zhang, Wei Zhou, Wenxin Gu, Zhaoming Wang

Abstract: Forecasting aurora borealis visibility matters for space weather research and aurora tourism. Visibility at a site and night depends on two distinct factors: (1) whether aurora is physically occurring, driven by solar wind-magnetosphere coupling, and (2) whether observing conditions allow naked-eye detection, mainly cloud cover and lunar illumination. We present Aurora Hunter, a two-stage cascade… ▽ More Forecasting aurora borealis visibility matters for space weather research and aurora tourism. Visibility at a site and night depends on two distinct factors: (1) whether aurora is physically occurring, driven by solar wind-magnetosphere coupling, and (2) whether observing conditions allow naked-eye detection, mainly cloud cover and lunar illumination. We present Aurora Hunter, a two-stage cascade that decouples these factors. Stage 1 predicts P(occurring) with XGBoost using 51 physics-driven features trained on joint Tromso+Kiruna data (about 16,600 hourly samples, 2015-2023) with labels from the Tromso AI all-sky image classifier. Stage 2 predicts P(clear observation given occurring) with logistic regression using 21 cloud-cover and lunar-illumination features trained only on aurora-occurring hours. The cascade P(visible)=P(occurring)*P(clear|occurring) reaches ROC-AUC 0.937 (Tromso test, 2019-2020) and 0.905 (independent Kiruna, 2024), improving a single-stage baseline by +0.087. Held-out Skibotn data (2022-2025) confirm cross-site generalization. SHAP identifies the Kp x nightside interaction, MLT position, and auroral oval distance as dominant predictors (39% combined). Prototype: https://aurora-hunter.onrender.com. △ Less

Submitted 25 May, 2026; v1 submitted 21 May, 2026; originally announced May 2026.

Optimal designs of heterogeneous grid transit networks

Authors: Wenbo Fan, Haoyang Mao, Li Zhen, Weihua Gu

Abstract: A general Continuum Approximation (CA) model is proposed for optimizing transit network designs (TND) in grid cities under spatially heterogeneous demand. While conventional studies often assume rigid geometric line configurations (e.g., unbranched orthogonal grids), our framework allows the grid bus lines to route more flexibly by making lateral movements and to form network configurations with l… ▽ More A general Continuum Approximation (CA) model is proposed for optimizing transit network designs (TND) in grid cities under spatially heterogeneous demand. While conventional studies often assume rigid geometric line configurations (e.g., unbranched orthogonal grids), our framework allows the grid bus lines to route more flexibly by making lateral movements and to form network configurations with line detouring, merging, and diverging. The resulting line and stop densities, as well as service headways, vary continuously across both directions of the city, constrained solely by vehicle flow conservation. By respecting non-uniform demand distributions, our heterogeneous networks substantially enlarge the class of heterogeneous network designs that can be represented and optimized within a tractable CA framework. To efficiently solve the optimization problem, we develop a sequential geometric programming framework that transforms the model into a sequence of standard geometric programming problems. Numerical experiments validate the accuracy of the proposed model and the solution method by comparing system metrics estimated by the CA models against the actual values computed from the discretized network designs. Under representative spatially heterogeneous demand scenarios, comparisons demonstrate that our model effectively reduces generalized costs by over 7% against existing homogeneous and restricted heterogeneous TND models. Key findings indicate that: (i) the proposed framework consistently outperforms these conventional counterparts across all tested scenarios; (ii) the fully heterogeneous structure becomes particularly advantageous when patron demand exhibits strong spatial heterogeneity; and (iii) these flexible designs yield the greatest benefits in high-demand, low-wage, and large-area cities. △ Less

Submitted 22 May, 2026; originally announced May 2026.

Charge readout electronics for the DUNE horizontal drift far detector: design and performance in ProtoDUNE-HD

Authors: DUNE Collaboration, S. Abbaslu, F. Abd Alrahman, A. Abed Abud, R. Acciarri, L. P. Accorsi, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, K. Adhikari, C. Adriano, K. Agudelo-Jaramillo, F. Akbar, F. Alemanno, N. S. Alex, L. Aliaga Soplin, A. Alqaisi, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, R. Amarinei , et al. (1346 additional authors not shown)

Abstract: DUNE (Deep Underground Neutrino Experiment) is a long-baseline neutrino oscillation experiment currently under construction, whose far detectors will be the largest liquid argon time projection chambers ever built. This detector design calls for custom-built cryogenic front-end electronics to meet its performance requirements. This paper describes the charge readout electronics that will be used i… ▽ More DUNE (Deep Underground Neutrino Experiment) is a long-baseline neutrino oscillation experiment currently under construction, whose far detectors will be the largest liquid argon time projection chambers ever built. This detector design calls for custom-built cryogenic front-end electronics to meet its performance requirements. This paper describes the charge readout electronics that will be used in the DUNE horizontal drift (HD) far detector and presents performance results using data from the ProtoDUNE-HD detector, a 770 ton liquid argon time projection chamber operated at the CERN Neutrino Platform in 2024 that served as the final prototype of the DUNE HD design. △ Less

Submitted 12 August, 2026; v1 submitted 26 April, 2026; originally announced April 2026.

Comments: Accepted version

Report number: FERMILAB-PUB-26-0270-LBNF, CERN-EP-2026-128

Journal ref: JINST 21 (2026) P08018

Approximation Models for Shared Mobility Rebalancing Under Structured Spatial Imbalance

Authors: Wenbo Fan, Zhouyun Chen, Weihua Gu

Abstract: Shared mobility systems (e.g., shared cars and ride-hailing services) generate persistent spatial imbalances as vehicles concentrate at popular destinations, leaving trip origins depleted of supply. Operators incur substantial costs in repositioning empty vehicles, and quantifying the theoretical minimum rebalancing distance is practically important. Exact computation requires solving a transporta… ▽ More Shared mobility systems (e.g., shared cars and ride-hailing services) generate persistent spatial imbalances as vehicles concentrate at popular destinations, leaving trip origins depleted of supply. Operators incur substantial costs in repositioning empty vehicles, and quantifying the theoretical minimum rebalancing distance is practically important. Exact computation requires solving a transportation linear program that is challenging at the city scale. Closed-form approximation models are derived for the minimum rebalancing distance in rectangular service regions. Parallel derivations are presented for the Manhattan metric (grid road networks) and the Euclidean metric (unconstrained movement). A scalar spatial imbalance index condenses the full demand pattern into a single interpretable quantity. Both models share a unified structure: the per-vehicle rebalancing distance scales with the square root of service area, the imbalance index, and a shape factor that depends solely on the aspect ratio. Calibration and validation against 500 exact LP solutions per metric confirm the area-scaling exponent to within 2\% of the theoretical prediction, across three demand distribution families. An empirical case study using January 2026 New York City for-hire vehicle trip data across 263 traffic analysis zones confirms that the formula generalizes to real-world, network-constrained demand. The results equip operators and system designers with solver-free, theoretically grounded tools for benchmarking rebalancing performance and optimizing service, rebalancing frequency, and demand-management interventions. △ Less

Submitted 6 April, 2026; originally announced April 2026.

Scintillation light calibrations, systematic uncertainties, and triggering efficiency in the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, A. Barnard, G. Barr, D. Barrow, J. Barrow, V. Basque, J. Bateman, B. Behera, O. Benevides Rodrigues, S. Berkman, A. Bhat, M. Bhattacharya, V. Bhelande, A. Binau, M. Bishai, A. Blake, B. Bogart, T. Bolton , et al. (169 additional authors not shown)

Abstract: Scintillation light, produced alongside ionisation charge from particle interactions, plays a critical role in liquid argon time projection chamber (LArTPC) detectors. A detailed understanding of its production and detection mechanisms is essential for robust calibration, systematic uncertainty evaluation, and physics analysis. This article describes the MicroBooNE light simulation, light-based tr… ▽ More Scintillation light, produced alongside ionisation charge from particle interactions, plays a critical role in liquid argon time projection chamber (LArTPC) detectors. A detailed understanding of its production and detection mechanisms is essential for robust calibration, systematic uncertainty evaluation, and physics analysis. This article describes the MicroBooNE light simulation, light-based triggering schemes, photomultiplier tube gain calibration, light response stability, and light-based systematic uncertainties over the course of five years of data collection. In addition, we present a measurement of scintillation light triggering efficiency, focusing on the lowest-light regime relevant to rare-event searches and low-energy neutrino interactions. Finally, we discuss two notable observations in MicroBooNE's data, both reported here for the first time: an approximately 50% decline in MicroBooNE's light yield over time, concentrated in the first two years of running; and a higher than expected O(200 kHz) rate of single photoelectron noise. The results presented provide an important benchmark of long-term light detection performance in LArTPC neutrino detectors. △ Less

Submitted 24 March, 2026; originally announced March 2026.

Fly-by transit: A novel door-to-door shared mobility with minimal stops

Authors: Wenbo Fan, Weihua Gu

Abstract: This paper introduces fly-by transit (FBT), a novel mobility system that employs modular mini-electric vehicles (mini-EVs) to provide door-to-door shared mobility with minimal stops. Unlike existing modular minibus concepts that rely on in-motion coupling and passenger transfers -- technologies unlikely to mature soon -- FBT lowers the technological barriers by building upon near-term feasible sol… ▽ More This paper introduces fly-by transit (FBT), a novel mobility system that employs modular mini-electric vehicles (mini-EVs) to provide door-to-door shared mobility with minimal stops. Unlike existing modular minibus concepts that rely on in-motion coupling and passenger transfers -- technologies unlikely to mature soon -- FBT lowers the technological barriers by building upon near-term feasible solutions. The system comprises two complementary mini-EV modules: low-cost trailers for on-demand feeder trips and high-performance leaders that guide coupled trailers in high-speed platoons along trunk lines. Trailers operate independently for detour-free feeder services, while stationary coupling at designated hubs enables platoons to achieve economies of scale (EoS). In-motion decoupling of the tail trailer allows stop-less operation without delaying the main convoy. As a proof of concept, a stylized corridor model is developed to analyze optimal FBT design. Results indicate that FBT can substantially reduce travel times relative to conventional buses and lower operating costs compared with e-hailing taxis. Numerical analyses further demonstrate that FBT achieves stronger EoS than both buses and taxis, yielding more than 13\% savings in generalized system costs. By addressing key limitations of existing transit systems, this study establishes FBT as a practical and scalable pathway toward transformative urban mobility and outlines directions for future research. △ Less

Submitted 11 December, 2025; v1 submitted 26 November, 2025; originally announced November 2025.

Operation of a Modular 3D-Pixelated Liquid Argon Time-Projection Chamber in a Neutrino Beam

Authors: DUNE Collaboration, S. Abbaslu, A. Abed Abud, R. Acciarri, L. P. Accorsi, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, C. Adriano, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos, M. Andreotti , et al. (1299 additional authors not shown)

Abstract: The 2x2 Demonstrator, a prototype for the Deep Underground Neutrino Experiment (DUNE) liquid argon (LAr) Near Detector, was exposed to the Neutrinos from the Main Injector (NuMI) neutrino beam at Fermi National Accelerator Laboratory (Fermilab). This detector prototypes a new modular design for a liquid argon time-projection chamber (LArTPC), comprised of a two-by-two array of four modules, each f… ▽ More The 2x2 Demonstrator, a prototype for the Deep Underground Neutrino Experiment (DUNE) liquid argon (LAr) Near Detector, was exposed to the Neutrinos from the Main Injector (NuMI) neutrino beam at Fermi National Accelerator Laboratory (Fermilab). This detector prototypes a new modular design for a liquid argon time-projection chamber (LArTPC), comprised of a two-by-two array of four modules, each further segmented into two optically-isolated LArTPCs. The 2x2 Demonstrator features a number of pioneering technologies, including a low-profile resistive field shell to establish drift fields, native 3D ionization pixelated imaging, and a high-coverage dielectric light readout system. The 2.4 tonne active mass detector is flanked upstream and downstream by supplemental solid-scintillator tracking planes, repurposed from the MINERvA experiment, which track ionizing particles exiting the argon volume. The antineutrino beam data collected by the detector over a 4.5 day period in 2024 include over 30,000 neutrino interactions in the LAr active volume-the first neutrino interactions reported by a DUNE detector prototype. During its physics-quality run, the 2x2 Demonstrator operated at a nominal drift field of 500 V/cm and maintained good LAr purity, with a stable electron lifetime of approximately 1.25 ms. This paper describes the detector and supporting systems, summarizes the installation and commissioning, and presents the initial validation of collected NuMI beam and off-beam self-triggers. In addition, it highlights observed interactions in the detector volume, including candidate muon anti-neutrino events. △ Less

Submitted 17 June, 2026; v1 submitted 6 September, 2025; originally announced September 2025.

Report number: FERMILAB-PUB-25-0537-LBNF

Journal ref: Instruments 2026, 10(1), 18

Spatial and Temporal Evaluations of the Liquid Argon Purity in ProtoDUNE-SP

Authors: DUNE Collaboration, S. Abbaslu, A. Abed Abud, R. Acciarri, L. P. Accorsi, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, C. Adriano, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos, M. Andreotti , et al. (1301 additional authors not shown)

Abstract: Liquid argon time projection chambers (LArTPCs) rely on highly pure argon to ensure that ionization electrons produced by charged particles reach readout arrays. ProtoDUNE Single-Phase (ProtoDUNE-SP) was an approximately 700-ton liquid argon detector intended to prototype the Deep Underground Neutrino Experiment (DUNE) Far Detector Horizontal Drift module. It contains two drift volumes bisected by… ▽ More Liquid argon time projection chambers (LArTPCs) rely on highly pure argon to ensure that ionization electrons produced by charged particles reach readout arrays. ProtoDUNE Single-Phase (ProtoDUNE-SP) was an approximately 700-ton liquid argon detector intended to prototype the Deep Underground Neutrino Experiment (DUNE) Far Detector Horizontal Drift module. It contains two drift volumes bisected by the cathode plane assembly, which is biased to create an almost uniform electric field in both volumes. The DUNE Far Detector modules must have robust cryogenic systems capable of filtering argon and supplying the TPC with clean liquid. This paper will explore comparisons of the argon purity measured by the purity monitors with those measured using muons in the TPC from October 2018 to November 2018. A new method is introduced to measure the liquid argon purity in the TPC using muons crossing both drift volumes of ProtoDUNE-SP. For extended periods on the timescale of weeks, the drift electron lifetime was measured to be above 30 ms using both systems. A particular focus will be placed on the measured purity of argon as a function of position in the detector. △ Less

Submitted 27 August, 2025; v1 submitted 11 July, 2025; originally announced July 2025.

Report number: CERN-EP-2025-157, FERMILAB-PUB-25-0445-V

Journal ref: JINST (2025) 20 P09008

Operation of the Trigger System for the ICARUS Detector at Fermilab

Authors: ICARUS collaboration, F. Abd Alrahman, P. Abratenko, N. Abrego-Martinez, A. Aduszkiewicz, F. Akbar, L. Aliaga Soplin, M. Artero Pons, J. Asaadi, W. F. Badgett, B. Baibussinov, F. Battisti, V. Bellini, R. Benocci, J. Berger, S. Berkman, S. Bertolucci, M. Betancourt, A. Blanchet, F. Boffelli, M. Bonesini, T. Boone, B. Bottino, A. Braggiotti, D. Brailsford , et al. (164 additional authors not shown)

Abstract: The ICARUS liquid argon TPC detector is taking data on the Booster (BNB) and Main Injector (NuMI) Neutrino beam lines at Fermilab with a trigger system based on the scintillation light produced by charged particles in coincidence with the proton beam extraction from the accelerators. The architecture and the deployment of the trigger system in the first two runs for physics are presented, as well… ▽ More The ICARUS liquid argon TPC detector is taking data on the Booster (BNB) and Main Injector (NuMI) Neutrino beam lines at Fermilab with a trigger system based on the scintillation light produced by charged particles in coincidence with the proton beam extraction from the accelerators. The architecture and the deployment of the trigger system in the first two runs for physics are presented, as well as the triggered event rates. The event recognition efficiency has been evaluated as a function of the deposited energy and the position of cosmic muons stopping inside the detector. △ Less

Submitted 5 August, 2025; v1 submitted 25 June, 2025; originally announced June 2025.

Comments: 22 pages, 16 figures

Report number: Fermilab PUB-25-0393-PPD

Journal ref: JINST 20 P10044 (2025)

Assessing the Robustness and Reducibility of Multiplex Networks with Embedding-Aided Interlayer Similarities

Authors: Haoran Nan, Senquan Wang, Chun Ouyang, Yanchen Zhou, Weiwei Gu

Abstract: The study of interlayer similarity of multiplex networks helps to understand the intrinsic structure of complex systems, revealing how changes in one layer can propagate and affect others, thus enabling broad implications for transportation, social, and biological systems. Existing algorithms that measure similarity between network layers typically encode only partial information, which limits the… ▽ More The study of interlayer similarity of multiplex networks helps to understand the intrinsic structure of complex systems, revealing how changes in one layer can propagate and affect others, thus enabling broad implications for transportation, social, and biological systems. Existing algorithms that measure similarity between network layers typically encode only partial information, which limits their effectiveness in capturing the full complexity inherent in multiplex networks. To address this limitation, we propose a novel interlayer similarity measuring approach named Embedding Aided inTerlayer Similarity (EATSim). EATSim concurrently incorporates intralayer structural similarity and cross-layer anchor node alignment consistency, providing a more comprehensive framework for analyzing interconnected systems. Extensive experiments on both synthetic and real-world networks demonstrate that EATSim effectively captures the underlying geometric similarities between interconnected networks, significantly improving the accuracy of interlayer similarity measurement. Moreover, EATSim achieves state-of-the-art performance in two downstream applications: predicting network robustness and network reducibility, showing its great potential in enhancing the understanding and management of complex systems. △ Less

Submitted 11 May, 2025; originally announced May 2025.

Photonic logic tensor computing beyond TOPS per core

Authors: Wenkai Zhang, Bo Wu, Wentao Gu, Hailong Zhou, Weida Hu, Ting He, Liao Chen, Wenchan Dong, Dongmei Huang, Yang Zhao, Wei Wang, Naidi Cui, Qiansheng Wang, Xi Xiao, Jianji Dong, Xinliang Zhang

Abstract: The soaring demand for computing resources has spurred great interest in photonic computing with higher speed and larger computing capacity. Photonic logic gates are of crucial importance due to the fundamental role of Boolean logic in modern digital computing systems. However, most photonic logic schemes struggle to exhibit the capability of massively parallel processing and flexible reconfigurat… ▽ More The soaring demand for computing resources has spurred great interest in photonic computing with higher speed and larger computing capacity. Photonic logic gates are of crucial importance due to the fundamental role of Boolean logic in modern digital computing systems. However, most photonic logic schemes struggle to exhibit the capability of massively parallel processing and flexible reconfiguration, owing to weak and fixed nonlinearity in optical elements. Here, we propose a photonic logic tensor computing architecture for the first time and fabricate the photonic universal logic tensor core (PULTC) with a parallel logic computing capacity beyond TOPS. Ten wavelength channels and four spatial channels are designed in PULTC, where the logic computing speed in each channel can reach 50 Gbit/s. After the nonlinear mapping of microring modulators, arbitrary logic operations can be achieved by configuring the Mach-Zehnder interferometer mesh. Our work offers an innovative route for photonic universal logic computing with high-parallel capability and propels the practical applications of photonic logic computing. △ Less

Submitted 28 April, 2025; originally announced April 2025.

European Contributions to Fermilab Accelerator Upgrades and Facilities for the DUNE Experiment

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase o… ▽ More The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase of the project with a 1.2 MW neutrino beam. Construction of this first phase is well underway. For DUNE Phase II, this will be closely followed by an upgrade of the beam power to > 2 MW, for which the European groups again have a key role and which will require the continued support of the European community for machine aspects of neutrino physics. Beyond the neutrino beam aspects, LBNF is also responsible for providing unique infrastructure to install and operate the DUNE neutrino detectors at FNAL and at the Sanford Underground Research Facility (SURF). The cryostats for the first two Liquid Argon Time Projection Chamber detector modules at SURF, a contribution of CERN to LBNF, are central to the success of the ongoing execution of DUNE Phase I. Likewise, successful and timely procurement of cryostats for two additional detector modules at SURF will be critical to the success of DUNE Phase II and the overall physics program. The DUNE Collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This paper is being submitted to the 'Accelerator technologies' and 'Projects and Large Experiments' streams. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and DUNE software and computing, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

DUNE Software and Computing Research and Development

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing res… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing resources, and successful research and development of software (both infrastructure and algorithmic) in order to achieve these scientific goals. This submission discusses the computing resources projections, infrastructure support, and software development needed for DUNE during the coming decades as an input to the European Strategy for Particle Physics Update for 2026. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Computing' stream focuses on DUNE software and computing. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

The DUNE Phase II Detectors

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the previous European Strategy for Particle Physics. The construction of DUNE Phase I is well underway. DUNE Phase II consists of a third and fourth far detector module, an upgraded near detector complex, and an enhanced > 2 MW beam. The fourth FD module is conceived as a 'Module of Opportunity', aimed at supporting the core DUNE science program while also expanding the physics opportunities with more advanced technologies. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Detector instrumentation' stream focuses on technologies and R&D for the DUNE Phase II detectors. Additional inputs related to the DUNE science program, DUNE software and computing, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 29 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

Design, fabrication and test of parallel-coupled slow-wave high-gradient structure for ultrashort input power pulses

Authors: Weihang Gu, Hao Zha, Jiaru Shi, Yuliang Jiang, Jiayang Liu, Xiancai Lin, Focheng Liu, Huaibi Chen

Abstract: Tsinghua University has designed an X-band (11.424 GHz) slow-wave parallel-coupling accelerating structure, and demonstrated the high performance of the over-coupled structure operating with ultrashort pulse. In this study, we redesigned a 40-ns structure with 10 cells, tailored to the specifications of a high-power experimental platform, and provided a detailed analysis of the experimental result… ▽ More Tsinghua University has designed an X-band (11.424 GHz) slow-wave parallel-coupling accelerating structure, and demonstrated the high performance of the over-coupled structure operating with ultrashort pulse. In this study, we redesigned a 40-ns structure with 10 cells, tailored to the specifications of a high-power experimental platform, and provided a detailed analysis of the experimental results. Unexpected bead-pull results were observed during the cold testing, which we attribute to inter-cavity coupling. To explain these results, a multi-cell coupling circuit model was proposed and analyzed. High-power testing was conducted on the TPOT-X platform, and the highest gradient achieved was 130 MV/m after $1.1*10^7$ conditioning pulses. Compared to conventional multi-cavity high-gradient structures, the distributed power feeding system offers a shorter conditioning period and demonstrates the potential to achieve higher accelerating gradients under short-pulse operation. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Observational Properties of Harmonic EMIC waves: Statistical Study

Authors: Shujie Gu, Xu Liu, Lunjin Chen, Maria Usanova, Zhiyang Xia, Wenyao Gu

Abstract: Electromagnetic ion cyclotron (EMIC) waves are discrete electromagnetic emissions separated by multiple ion gyrofrequencies. Harmonic EMIC waves are defined as waves with a strong electric or magnetic field (or both) at the harmonics of the fundamental EMIC mode. In this paper, for the first time, we present a statistical study on harmonic EMIC waves by the Van Allen Probes. The EMIC waves are cat… ▽ More Electromagnetic ion cyclotron (EMIC) waves are discrete electromagnetic emissions separated by multiple ion gyrofrequencies. Harmonic EMIC waves are defined as waves with a strong electric or magnetic field (or both) at the harmonics of the fundamental EMIC mode. In this paper, for the first time, we present a statistical study on harmonic EMIC waves by the Van Allen Probes. The EMIC waves are categorized into three types based on their harmonics: (1) fundamental mode only (without higher harmonics), (2) electrostatic (ES) harmonics, and (3) electromagnetic (EM) harmonics. Our statistical study shows that ES and EM harmonic EMIC waves predominantly occur on the dayside, outside the plasmasphere with $L >5$ and are associated with a low $f_{pe}/f_{ce}$, a high proton $β_H$, and a strong fundamental EMIC mode. The results will advance our understanding of harmonic EMIC waves and their generation mechanisms. △ Less

Submitted 20 December, 2024; originally announced December 2024.

Optical turbulence in the atmospheric surface layer at the Pamir Plateau Muztagh-ata site

Authors: Wenbo Gu, Ali Esamdin, Chunhai Bai, Xuan Zhang, Guojie Feng, Guangxin Pu, Letian Wang, Gaowen Sun, Haozhi Wang, Lixian Shen

Abstract: In this paper, we conducted a detailed analysis of optical turbulence in the Atmospheric Surface Layer (ASL) at Muztagh-ata site during on-site testing. We utilized ultrasonic anemometers positioned on a 30-meter tower to collect and process data at five height levels, obtaining data from October 1, 2021 to the present. We investigated the behavior of optical turbulence parameters (\(C_n^2\) and s… ▽ More In this paper, we conducted a detailed analysis of optical turbulence in the Atmospheric Surface Layer (ASL) at Muztagh-ata site during on-site testing. We utilized ultrasonic anemometers positioned on a 30-meter tower to collect and process data at five height levels, obtaining data from October 1, 2021 to the present. We investigated the behavior of optical turbulence parameters (\(C_n^2\) and seeing \(\varepsilon\)) in the ASL. Nighttime \(C_n^2\) primarily fluctuated in the range of \(10^{-16}\) to \(10^{-14}\), exhibiting an exponential decrease with height. During the day, it showed a \(h^{-0.82}\) dependency, while at night, it displayed a \(h^{-0.48}\) dependency. Additionally, we presented the distribution of seeing across different layers within the ASL, showing a gradual decrease with increasing height, with a median seeing of 0.24 arcseconds at nighttime and 0.48 arcseconds at daytime between 6-30m. We investigated the relationship between surface temperature inversion, seeing in the ASL, and wind speed at the site. Our results show that under temperature inversion conditions, seeing significantly improves and is often accompanied by low to moderate wind speeds, while high wind speeds are usually associated with poorer seeing. Preliminary calculations and observational results, combined with the high altitude and unique geographical location, suggest that Muztagh-ata site has the potential to be an outstanding optical astronomical observatory in the western plateau of china. △ Less

Submitted 4 November, 2024; v1 submitted 28 October, 2024; originally announced October 2024.

Comments: 9 pages,17 figures.Accpeted for publication in MNRAS

The track-length extension fitting algorithm for energy measurement of interacting particles in liquid argon TPCs and its performance with ProtoDUNE-SP data

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, N. S. Alex, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos , et al. (1348 additional authors not shown)

Abstract: This paper introduces a novel track-length extension fitting algorithm for measuring the kinetic energies of inelastically interacting particles in liquid argon time projection chambers (LArTPCs). The algorithm finds the most probable offset in track length for a track-like object by comparing the measured ionization density as a function of position with a theoretical prediction of the energy los… ▽ More This paper introduces a novel track-length extension fitting algorithm for measuring the kinetic energies of inelastically interacting particles in liquid argon time projection chambers (LArTPCs). The algorithm finds the most probable offset in track length for a track-like object by comparing the measured ionization density as a function of position with a theoretical prediction of the energy loss as a function of the energy, including models of electron recombination and detector response. The algorithm can be used to measure the energies of particles that interact before they stop, such as charged pions that are absorbed by argon nuclei. The algorithm's energy measurement resolutions and fractional biases are presented as functions of particle kinetic energy and number of track hits using samples of stopping secondary charged pions in data collected by the ProtoDUNE-SP detector, and also in a detailed simulation. Additional studies describe the impact of the dE/dx model on energy measurement performance. The method described in this paper to characterize the energy measurement performance can be repeated in any LArTPC experiment using stopping secondary charged pions. △ Less

Submitted 26 December, 2024; v1 submitted 26 September, 2024; originally announced September 2024.

Report number: FERMILAB-PUB-24-0561-LBNF-PPD, CERN-EP-2024-256

DUNE Phase II: Scientific Opportunities, Detector Concepts, Technological Solutions

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1347 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the European Strategy for Particle Physics. While the construction of the DUNE Phase I is well underway, this White Paper focuses on DUNE Phase II planning. DUNE Phase-II consists of a third and fourth far detector (FD) module, an upgraded near detector complex, and an enhanced 2.1 MW beam. The fourth FD module is conceived as a "Module of Opportunity", aimed at expanding the physics opportunities, in addition to supporting the core DUNE science program, with more advanced technologies. This document highlights the increased science opportunities offered by the DUNE Phase II near and far detectors, including long-baseline neutrino oscillation physics, neutrino astrophysics, and physics beyond the standard model. It describes the DUNE Phase II near and far detector technologies and detector design concepts that are currently under consideration. A summary of key R&D goals and prototyping phases needed to realize the Phase II detector technical designs is also provided. DUNE's Phase II detectors, along with the increased beam power, will complete the full scope of DUNE, enabling a multi-decadal program of groundbreaking science with neutrinos. △ Less

Submitted 22 August, 2024; originally announced August 2024.

Report number: FERMILAB-TM-2833-LBNF

Characterization of 3D printed micro-blades for cutting tissue-embedding material

Authors: Saisneha Koppaka, David Doan, Wei Cai, Wendy Gu, Sindy K. Y. Tang

Abstract: Cutting soft materials on the microscale has emerging applications in single-cell studies, tissue microdissection for organoid culture, drug screens, and other analyses. However, the cutting process is complex and remains incompletely understood. Furthermore, precise control over blade geometries, such as the blade tip radius, has been difficult to achieve. In this work, we use the Nanoscribe 3D p… ▽ More Cutting soft materials on the microscale has emerging applications in single-cell studies, tissue microdissection for organoid culture, drug screens, and other analyses. However, the cutting process is complex and remains incompletely understood. Furthermore, precise control over blade geometries, such as the blade tip radius, has been difficult to achieve. In this work, we use the Nanoscribe 3D printer to precisely fabricate micro-blades (i.e., blades <1 mm in length) and blade grid geometries. This fabrication method enables a systematic study of the effect of blade geometry on the indentation cutting of paraffin wax, a common tissue-embedding material. First, we print straight micro-blades with tip radius ranging from ~100 nm to 10 um. The micro-blades are mounted in a custom nanoindentation setup to measure the cutting energy during indentation cutting of paraffin. Cutting energy, measured as the difference in dissipated energy between the first and second loading cycles, decreases as blade tip radius decreases, until ~357 nm when the cutting energy plateaus despite further decrease in tip radius. Second, we expand our method to blades printed in unconventional configurations, including parallel blade structures and blades arranged in a square grid. Under the conditions tested, the cutting energy scales approximately linearly with the total length of the blades comprising the blade structure. The experimental platform described can be extended to investigate other blade geometries and guide the design of microscale cutting of soft materials. △ Less

Submitted 3 August, 2024; originally announced August 2024.

Comments: 15 pages, 3 figures, 7 supplementary figures

First Measurement of the Total Inelastic Cross-Section of Positively-Charged Kaons on Argon at Energies Between 5.0 and 7.5 GeV

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1341 additional authors not shown)

Abstract: ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each… ▽ More ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380$\pm$26 mbarns for the 6 GeV/$c$ setting and 379$\pm$35 mbarns for the 7 GeV/$c$ setting. △ Less

Submitted 1 August, 2024; originally announced August 2024.

Report number: CERN-EP-2024-211, FERMILAB-PUB-24-0216-V

Journal ref: Phys. Rev. D 110, (2024) 092011

Angular dependent measurement of electron-ion recombination in liquid argon for ionization calorimetry in the ICARUS liquid argon time projection chamber

Authors: ICARUS collaboration, P. Abratenko, N. Abrego-Martinez, A. Aduszkiewic, F. Akbar, L. Aliaga Soplin, M. Artero Pons, J. Asaadi, W. F. Badgett, B. Baibussinov, B. Behera, V. Bellini, R. Benocci, J. Berger, S. Berkman, S. Bertolucci, M. Betancourt, M. Bonesini, T. Boone, B. Bottino, A. Braggiotti, D. Brailsford, S. J. Brice, V. Brio, C. Brizzolari , et al. (156 additional authors not shown)

Abstract: This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are us… ▽ More This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are used for the calorimetric energy scale calibration of the ICARUS TPC, which is also presented. The impact of the EMB model is studied on calorimetric particle identification, as well as muon and proton energy measurements. Accounting for the angular dependence in EMB recombination improves the accuracy and precision of these measurements. △ Less

Submitted 9 August, 2024; v1 submitted 17 July, 2024; originally announced July 2024.

Report number: FERMILAB-PUB-24-0332-PPD

Journal ref: JINST 20 P01033 (2025)

Calibration and simulation of ionization signal and electronics noise in the ICARUS liquid argon time projection chamber

Authors: ICARUS collaboration, P. Abratenko, N. Abrego-Martinez, A. Aduszkiewic, F. Akbar, L. Aliaga Soplin, M. Artero Pons, J. Asaadi, W. F. Badgett, B. Baibussinov, B. Behera, V. Bellini, R. Benocci, J. Berger, S. Berkman, S. Bertolucci, M. Betancourt, M. Bonesini, T. Boone, B. Bottino, A. Braggiotti, D. Brailsford, S. J. Brice, V. Brio, C. Brizzolari , et al. (156 additional authors not shown)

Abstract: The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedu… ▽ More The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedure removes non-uniformities in the ICARUS TPC response to charge in space and time. This work leverages the copious number of cosmic ray muons available to ICARUS at the surface. The ionization signal shape simulation applies a novel procedure that tunes the simulation to match what is measured in data. The end result of the equalization procedure and simulation tuning allows for a comparison of charge measurements in ICARUS between Monte Carlo simulation and data, showing good performance with minimal residual bias between the two. △ Less

Submitted 5 August, 2024; v1 submitted 16 July, 2024; originally announced July 2024.

Report number: FERMILAB-PUB-24-0330-PPD

Supernova Pointing Capabilities of DUNE

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr… ▽ More The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on 40Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage. △ Less

Submitted 24 December, 2025; v1 submitted 14 July, 2024; originally announced July 2024.

Comments: 26 pages, 17 figures

Report number: FERMILAB-PUB-24-0319-LBNF

Journal ref: Phys. Rev. D 111, 092006 (Published 12 May, 2025)

Improving neutrino energy estimation of charged-current interaction events with recurrent neural networks in MicroBooNE

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, A. Barnard, G. Barr, D. Barrow, J. Barrow, V. Basque, J. Bateman, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book , et al. (164 additional authors not shown)

Abstract: We present a deep learning-based method for estimating the neutrino energy of charged-current neutrino-argon interactions. We employ a recurrent neural network (RNN) architecture for neutrino energy estimation in the MicroBooNE experiment, utilizing liquid argon time projection chamber (LArTPC) detector technology. Traditional energy estimation approaches in LArTPCs, which largely rely on reconstr… ▽ More We present a deep learning-based method for estimating the neutrino energy of charged-current neutrino-argon interactions. We employ a recurrent neural network (RNN) architecture for neutrino energy estimation in the MicroBooNE experiment, utilizing liquid argon time projection chamber (LArTPC) detector technology. Traditional energy estimation approaches in LArTPCs, which largely rely on reconstructing and summing visible energies, often experience sizable biases and resolution smearing because of the complex nature of neutrino interactions and the detector response. The estimation of neutrino energy can be improved after considering the kinematics information of reconstructed final-state particles. Utilizing kinematic information of reconstructed particles, the deep learning-based approach shows improved resolution and reduced bias for the muon neutrino Monte Carlo simulation sample compared to the traditional approach. In order to address the common concern about the effectiveness of this method on experimental data, the RNN-based energy estimator is further examined and validated with dedicated data-simulation consistency tests using MicroBooNE data. We also assess its potential impact on a neutrino oscillation study after accounting for all statistical and systematic uncertainties and show that it enhances physics sensitivity. This method has good potential to improve the performance of other physics analyses. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Report number: FERMILAB-PUB-24-0287

Measurement of the differential cross section for neutral pion production in charged-current muon neutrino interactions on argon with the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, D. Barrow, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, M. B. Brunetti, L. Camilleri , et al. (163 additional authors not shown)

Abstract: We present a measurement of neutral pion production in charged-current interactions using data recorded with the MicroBooNE detector exposed to Fermilab's booster neutrino beam. The signal comprises one muon, one neutral pion, any number of nucleons, and no charged pions. Studying neutral pion production in the MicroBooNE detector provides an opportunity to better understand neutrino-argon interac… ▽ More We present a measurement of neutral pion production in charged-current interactions using data recorded with the MicroBooNE detector exposed to Fermilab's booster neutrino beam. The signal comprises one muon, one neutral pion, any number of nucleons, and no charged pions. Studying neutral pion production in the MicroBooNE detector provides an opportunity to better understand neutrino-argon interactions, and is crucial for future accelerator-based neutrino oscillation experiments. Using a dataset corresponding to $6.86 \times 10^{20}$ protons on target, we present single-differential cross sections in muon and neutral pion momenta, scattering angles with respect to the beam for the outgoing muon and neutral pion, as well as the opening angle between the muon and neutral pion. Data extracted cross sections are compared to generator predictions. We report good agreement between the data and the models for scattering angles, except for an over-prediction by generators at muon forward angles. Similarly, the agreement between data and the models as a function of momentum is good, except for an underprediction by generators in the medium momentum ranges, $200-400$ MeV for muons and $100-200$ MeV for pions. △ Less

Submitted 6 May, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

Report number: FERMILAB-PUB-24-0142-CSAID-PPD

Optimal design of ride-pooling as on-demand feeder services

Authors: Wenbo Fan, Weihua Gu, Meng Xu

Abstract: The technology-enabled ride-pooling (RP) is designed as an on-demand feeder service to connect remote areas to transit terminals (or activity centers). We propose the so-called ``hold-dispatch'' operation strategy, which imposes a target number of shared rides (termed the ride-pooling size) for each vehicle to enhance RP's transportation efficiency. Analytical models are formulated at the planning… ▽ More The technology-enabled ride-pooling (RP) is designed as an on-demand feeder service to connect remote areas to transit terminals (or activity centers). We propose the so-called ``hold-dispatch'' operation strategy, which imposes a target number of shared rides (termed the ride-pooling size) for each vehicle to enhance RP's transportation efficiency. Analytical models are formulated at the planning level to estimate the costs of the RP operator and the patrons. Accordingly, the design problem is constructed to minimize the total system cost concerning the system layout (i.e., in terms of service zone partitioning), resource deployment (i.e., fleet size), and operational decision (i.e., ride-pooling size). The proposed models admit spatial heterogeneity arising from the non-uniformity of demand distributions and service locations, and can furnish heterogeneous designs. Closed-form formulas for the optimal zoning and fleet size are developed, which unveil fundamental insights regarding the impacts of key operating factors (e.g., demand density and distance to the terminal). Extensive numerical experiments demonstrate (i) the effectiveness of heterogeneous service designs and (ii) the advantage of the proposed RP service with hold-dispatch strategy over alternative designs studied in the literature, i.e., RP with a ``quick-dispatch'' strategy and flexible-route transit, in a wide range of operating scenarios. These findings can assist transportation network companies and transit agencies in successfully integrating RP and transit services. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1297 additional authors not shown)

Abstract: Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 720 t of total liquid argon mass with 410 t of fiducial mass. A 5.4 ppm nitrogen contamination was present during the xenon doping campaign. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 2 August, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 36 pages, 20 figures. Corrected author list; corrected typos across paper and polished text

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

Journal ref: JINST 19 P08005 (2024)

High Absorptivity Nanotextured Powders for Additive Manufacturing

Authors: Ottman A. Tertuliano, Philip J. DePond, Andrew C. Lee, Jiho Hong, David Doan, Luc Capaldi, Mark Brongersma, X. Wendy Gu, Manyalibo J. Matthews, Wei Cai, Adrian J. Lew

Abstract: The widespread application of metal additive manufacturing (AM) is limited by the ability to control the complex interactions between the energy source and the feedstock material. Here we develop a generalizable process to introduce nanoscale grooves to the surface of metal powders which increases the powder absorptivity by up to 70% during laser powder bed fusion. Absorptivity enhancements in cop… ▽ More The widespread application of metal additive manufacturing (AM) is limited by the ability to control the complex interactions between the energy source and the feedstock material. Here we develop a generalizable process to introduce nanoscale grooves to the surface of metal powders which increases the powder absorptivity by up to 70% during laser powder bed fusion. Absorptivity enhancements in copper, copper-silver, and tungsten enables energy efficient manufacturing, with printing of pure copper at relative densities up to 92% using laser energy densities as low as 82 J/mm^3. Simulations show the enhanced powder absorptivity results from plasmon-enabled light concentration in nanoscale grooves combined with multiple scattering events. The approach taken here demonstrates a general method to enhance the absorptivity and printability of reflective and refractory metal powders by changing the surface morphology of the feedstock without altering its composition. △ Less

Submitted 8 December, 2023; originally announced December 2023.

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Search for heavy neutral leptons in electron-positron and neutral-pion final states with the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, D. Barrow, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, M. B. Brunetti, L. Camilleri , et al. (163 additional authors not shown)

Abstract: We present the first search for heavy neutral leptons (HNL) decaying into $νe^+e^-$ or $νπ^0$ final states in a liquid-argon time projection chamber using data collected with the MicroBooNE detector. The data were recorded synchronously with the NuMI neutrino beam from Fermilab's Main Injector corresponding to a total exposure of $7.01 \times 10^{20}$ protons on target. We set upper limits at the… ▽ More We present the first search for heavy neutral leptons (HNL) decaying into $νe^+e^-$ or $νπ^0$ final states in a liquid-argon time projection chamber using data collected with the MicroBooNE detector. The data were recorded synchronously with the NuMI neutrino beam from Fermilab's Main Injector corresponding to a total exposure of $7.01 \times 10^{20}$ protons on target. We set upper limits at the $90\%$ confidence level on the mixing parameter $\lvert U_{μ4}\rvert^2$ in the mass ranges $10\le m_{\rm HNL}\le 150$ MeV for the $νe^+e^-$ channel and $150\le m_{\rm HNL}\le 245$ MeV for the $νπ^0$ channel, assuming $\lvert U_{e 4}\rvert^2 = \lvert U_{τ4}\rvert^2 = 0$. These limits represent the most stringent constraints in the mass range $35<m_{\rm HNL}<175$ MeV and the first constraints from a direct search for $νπ^0$ decays. △ Less

Submitted 12 January, 2024; v1 submitted 11 October, 2023; originally announced October 2023.

Comments: Version as accepted by Physical Review Letters, some presentational changes and updated references, no changes to results

Report number: FERMILAB-PUB-23-574-ND

Measurement of three-dimensional inclusive muon-neutrino charged-current cross sections on argon with the MicroBooNE detector

Authors: MicroBooNE Collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, D. Barrow, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, Y. Cao , et al. (165 additional authors not shown)

Abstract: We report the measurement of the differential cross section $d^{2}σ(E_ν)/ d\cos(θ_μ) dP_μ$ for inclusive muon-neutrino charged-current scattering on argon. This measurement utilizes data from 6.4$\times10^{20}$ protons on target of exposure collected using the MicroBooNE liquid argon time projection chamber located along the Fermilab Booster Neutrino Beam with a mean neutrino energy of approximate… ▽ More We report the measurement of the differential cross section $d^{2}σ(E_ν)/ d\cos(θ_μ) dP_μ$ for inclusive muon-neutrino charged-current scattering on argon. This measurement utilizes data from 6.4$\times10^{20}$ protons on target of exposure collected using the MicroBooNE liquid argon time projection chamber located along the Fermilab Booster Neutrino Beam with a mean neutrino energy of approximately 0.8~GeV. The mapping from reconstructed kinematics to truth quantities, particularly from reconstructed to true neutrino energy, is validated within uncertainties by comparing the distribution of reconstructed hadronic energy in data to that of the model prediction in different muon scattering angle bins after applying a conditional constraint from the muon momentum distribution in data. The success of this validation gives confidence that the missing energy in the MicroBooNE detector is well-modeled within uncertainties in simulation, enabling the unfolding to a three-dimensional measurement over muon momentum, muon scattering angle, and neutrino energy. The unfolded measurement covers an extensive phase space, providing a wealth of information useful for future liquid argon time projection chamber experiments measuring neutrino oscillations. Comparisons against a number of commonly used model predictions are included and their performance in different parts of the available phase-space is discussed. △ Less

Submitted 26 November, 2025; v1 submitted 12 July, 2023; originally announced July 2023.

Report number: FERMILAB-PUB-23-368-ND

Journal ref: Volume 870, November 2025, 139939

Measurement of ambient radon progeny decay rates and energy spectra in liquid argon using the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, D. Barrow, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, Y. Cao , et al. (166 additional authors not shown)

Abstract: We report measurements of radon progeny in liquid argon within the MicroBooNE time projection chamber (LArTPC). The presence of specific radon daughters in MicroBooNE's 85 metric tons of active liquid argon bulk is probed with newly developed charge-based low-energy reconstruction tools and analysis techniques to detect correlated $^{214}$Bi-$^{214}$Po radioactive decays. Special datasets taken du… ▽ More We report measurements of radon progeny in liquid argon within the MicroBooNE time projection chamber (LArTPC). The presence of specific radon daughters in MicroBooNE's 85 metric tons of active liquid argon bulk is probed with newly developed charge-based low-energy reconstruction tools and analysis techniques to detect correlated $^{214}$Bi-$^{214}$Po radioactive decays. Special datasets taken during periods of active radon doping enable new demonstrations of the calorimetric capabilities of single-phase neutrino LArTPCs for $β$ and $α$ particles with electron-equivalent energies ranging from 0.1 to 3.0 MeV. By applying $^{214}$Bi-$^{214}$Po detection algorithms to data recorded over a 46-day period, no statistically significant presence of radioactive $^{214}$Bi is detected, and a limit on the activity is placed at $<0.35$ mBq/kg at the 95% confidence level. This bulk $^{214}$Bi radiopurity limit -- the first ever reported for a liquid argon detector incorporating liquid-phase purification -- is then further discussed in relation to the targeted upper limit of 1 mBq/kg on bulk $^{222}$Rn activity for the DUNE neutrino detector. △ Less

Submitted 22 March, 2024; v1 submitted 6 July, 2023; originally announced July 2023.

Report number: FERMILAB-PUB-23-352-ND

Journal ref: Phys. Rev. D 109, 052007 (2024)

First measurement of $η$ production in neutrino interactions on argon with MicroBooNE

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, Y. Cao , et al. (164 additional authors not shown)

Abstract: We present a measurement of $η$ production from neutrino interactions on argon with the MicroBooNE detector. The modeling of resonant neutrino interactions on argon is a critical aspect of the neutrino oscillation physics program being carried out by the DUNE and Short Baseline Neutrino programs. $η$ production in neutrino interactions provides a powerful new probe of resonant interactions, comple… ▽ More We present a measurement of $η$ production from neutrino interactions on argon with the MicroBooNE detector. The modeling of resonant neutrino interactions on argon is a critical aspect of the neutrino oscillation physics program being carried out by the DUNE and Short Baseline Neutrino programs. $η$ production in neutrino interactions provides a powerful new probe of resonant interactions, complementary to pion channels, and is particularly suited to the study of higher-order resonances beyond the $Δ(1232)$. We measure a flux-integrated cross section for neutrino-induced $η$ production on argon of $3.22 \pm 0.84 \; \textrm{(stat.)} \pm 0.86 \; \textrm{(syst.)}$ $10^{-41}{\textrm{cm}}^{2}$/nucleon. By demonstrating the successful reconstruction of the two photons resulting from $η$ production, this analysis enables a novel calibration technique for electromagnetic showers in GeV accelerator neutrino experiments. △ Less

Submitted 4 May, 2024; v1 submitted 25 May, 2023; originally announced May 2023.

Report number: FERMILAB-PUB-23-249-ND

Journal ref: Phys. Rev. Lett. 132, 151801 Published 10 April 2024

First demonstration of $\mathcal{O}(1\,\text{ns})$ timing resolution in the MicroBooNE liquid argon time projection chamber

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, G. Barr, J. Barrow, V. Basque, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book, L. Camilleri, Y. Cao, D. Caratelli , et al. (163 additional authors not shown)

Abstract: MicroBooNE is a neutrino experiment located in the Booster Neutrino Beamline (BNB) at Fermilab, which collected data from 2015 to 2021. MicroBooNE's liquid argon time projection chamber (LArTPC) is accompanied by a photon detection system consisting of 32 photomultiplier tubes used to measure the argon scintillation light and determine the timing of neutrino interactions. Analysis techniques combi… ▽ More MicroBooNE is a neutrino experiment located in the Booster Neutrino Beamline (BNB) at Fermilab, which collected data from 2015 to 2021. MicroBooNE's liquid argon time projection chamber (LArTPC) is accompanied by a photon detection system consisting of 32 photomultiplier tubes used to measure the argon scintillation light and determine the timing of neutrino interactions. Analysis techniques combining light signals and reconstructed tracks are applied to achieve a neutrino interaction time resolution of $\mathcal{O}(1\,\text{ns})$. The result obtained allows MicroBooNE to access the ns neutrino pulse structure of the BNB for the first time. The timing resolution achieved will enable significant enhancement of cosmic background rejection for all neutrino analyses. Furthermore, the ns timing resolution opens new avenues to search for long-lived-particles such as heavy neutral leptons in MicroBooNE, as well as in future large LArTPC experiments, namely the SBN program and DUNE. △ Less

Submitted 29 August, 2023; v1 submitted 4 April, 2023; originally announced April 2023.

A Hybrid 3D/2D Field Response Calculation for Liquid Argon Detectors with PCB Based Anode Plane

Authors: S. Martynenko, F. Pietropaolo, B. Viren, X. Qian, H. Chen, S. Gao, W. Gu, J. Jo, S. Kettell, Y. Li, H. Liu, N. Nayak, B. Yu, H. Yu, C. Zhang, U. Kose, F. Resnati, S. Tufanli, F. Boran, F. Dolek

Abstract: Liquid Argon Time Projection Chamber (LArTPC) technology is commonly utilized in neutrino detector designs. It enables detailed reconstruction of neutrino events with high spatial precision and low energy threshold. Its field response (FR) model describes the time-dependent electric currents induced in the anode-plane electrodes when ionization electrons drift nearby. An accurate and precise FR is… ▽ More Liquid Argon Time Projection Chamber (LArTPC) technology is commonly utilized in neutrino detector designs. It enables detailed reconstruction of neutrino events with high spatial precision and low energy threshold. Its field response (FR) model describes the time-dependent electric currents induced in the anode-plane electrodes when ionization electrons drift nearby. An accurate and precise FR is a crucial input to LArTPC detector simulations and charge reconstruction. Established LArTPC designs have been based on parallel wire planes. It allows accurate and computationally economic two-dimensional (2D) FR models utilizing the translational symmetry along the direction of the wires. Recently, novel LArTPC designs utilize electrodes formed on printed circuit board (PCB) in the shape of strips with through holes. The translational symmetry is no longer a good approximation near the electrodes and a new FR calculation that employs regions with three dimensions (3D) has been developed. Extending the 2D models to 3D would be computationally expensive. Fortuitously, the nature of strips with through holes allows for a computationally economic approach based on the finite-difference method (FDM). In this paper, we present a new software package "pochoir" that calculates LArTPC field response for these new strip-based anode designs. This package combines 3D calculations in the volume near the electrodes with 2D far-field solutions to achieve fast and precise field response computation. We apply the resulting FR to simulate and reconstruct samples of cosmic-ray muons and $^{39}$Ar decays from a Vertical Drift (VD) detector prototype operated at CERN. We find the difference between real and simulated data within 5 %. Current state-of-the-art LArTPC software requires a 2D FR which we provide by averaging over one dimension and estimate that variations lost in this average are smaller than 7 %. △ Less

Submitted 17 March, 2023; originally announced March 2023.

Comments: 16 pages, 12 figures

Highly-parallelized simulation of a pixelated LArTPC on a GPU

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1282 additional authors not shown)

Abstract: The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr… ▽ More The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype. △ Less

Submitted 28 February, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 26 pages, 15 figures

Report number: FERMILAB-PUB-22-926-LBNF

Journal ref: JINST 2023 18 P04034

Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1235 additional authors not shown)

Abstract: Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is… ▽ More Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons. △ Less

Submitted 31 May, 2023; v1 submitted 2 November, 2022; originally announced November 2022.

Comments: 19 pages, 10 figures

Report number: FERMILAB-PUB-22-784, CERN-EP-DRAFT-MISC-2022-008

Journal ref: Phys. Rev. D 107, 092012 (2023)

Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, B. Ali-Mohammadzadeh, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo , et al. (1203 additional authors not shown)

Abstract: The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char… ▽ More The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation. △ Less

Submitted 17 July, 2023; v1 submitted 29 June, 2022; originally announced June 2022.

Comments: 39 pages, 20 figures. Accepted version. Published version available in Eur. Phys. J. C 83, 618 (2023) https://doi.org/10.1140/epjc/s10052-023-11733-2

Report number: FERMILAB-PUB-22-488-AD-ESH-LBNF-ND-SCD, CERN-EP-DRAFT-MISC-2022-007

Journal ref: Eur. Phys. J. C 83, 618 (2023)

Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1204 additional authors not shown)

Abstract: Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det… ▽ More Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation. △ Less

Submitted 30 June, 2022; v1 submitted 31 March, 2022; originally announced March 2022.

Comments: 31 pages, 15 figures

Report number: FERMILAB-PUB-22-240-AD-ESH-LBNF-ND-SCD, CERN-EP-2022-077

Journal ref: Eur.Phys.J.C 82 (2022) 10, 903

Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1202 additional authors not shown)

Abstract: DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and… ▽ More DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties △ Less

Submitted 3 June, 2022; v1 submitted 30 March, 2022; originally announced March 2022.

Comments: 31 pages, 29 figures

Report number: CERN-EP-DRAFT-MISC-2022-003; FERMILAB-PUB-22-242-LBNF

Observation of Radon Mitigation in MicroBooNE by a Liquid Argon Filtration System

Authors: MicroBooNE collaboration, P. Abratenko, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, C. Barnes, G. Barr, J. Barrow, V. Basque, L. Bathe-Peters, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, T. Bolton, J. Y. Book, L. Camilleri, D. Caratelli, I. Caro Terrazas , et al. (168 additional authors not shown)

Abstract: The MicroBooNE liquid argon time projection chamber (LArTPC) maintains a high level of liquid argon purity through the use of a filtration system that removes electronegative contaminants in continuously-circulated liquid, recondensed boil off, and externally supplied argon gas. We use the MicroBooNE LArTPC to reconstruct MeV-scale radiological decays. Using this technique we measure the liquid ar… ▽ More The MicroBooNE liquid argon time projection chamber (LArTPC) maintains a high level of liquid argon purity through the use of a filtration system that removes electronegative contaminants in continuously-circulated liquid, recondensed boil off, and externally supplied argon gas. We use the MicroBooNE LArTPC to reconstruct MeV-scale radiological decays. Using this technique we measure the liquid argon filtration system's efficacy at removing radon. This is studied by placing a 500 kBq $^{222}$Rn source upstream of the filters and searching for a time-dependent increase in the number of radiological decays in the LArTPC. In the context of two models for radon mitigation via a liquid argon filtration system, a slowing mechanism and a trapping mechanism, MicroBooNE data supports a radon reduction factor of greater than 99.999% or 97%, respectively. Furthermore, a radiological survey of the filters found that the copper-based filter material was the primary medium that removed the $^{222}$Rn. This is the first observation of radon mitigation in liquid argon with a large-scale copper-based filter and could offer a radon mitigation solution for future large LArTPCs. △ Less

Submitted 26 October, 2022; v1 submitted 18 March, 2022; originally announced March 2022.

Comments: 14 pages, 7 figures, accepted by the Journal of Instrumentation

Report number: FERMILAB-PUB-22-203-ND

Journal ref: JINST 17 P11022 (2022)

Novel Approach for Evaluating Detector-Related Uncertainties in a LArTPC Using MicroBooNE Data

Authors: MicroBooNE collaboration, P. Abratenko, R. An, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, C. Barnes, G. Barr, V. Basque, L. Bathe-Peters, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bishai, A. Blake, T. Bolton, J. Y. Book, L. Camilleri, D. Caratelli, I. Caro Terrazas, F. Cavanna , et al. (161 additional authors not shown)

Abstract: Primary challenges for current and future precision neutrino experiments using liquid argon time projection chambers (LArTPCs) include understanding detector effects and quantifying the associated systematic uncertainties. This paper presents a novel technique for assessing and propagating LArTPC detector-related systematic uncertainties. The technique makes modifications to simulation waveforms b… ▽ More Primary challenges for current and future precision neutrino experiments using liquid argon time projection chambers (LArTPCs) include understanding detector effects and quantifying the associated systematic uncertainties. This paper presents a novel technique for assessing and propagating LArTPC detector-related systematic uncertainties. The technique makes modifications to simulation waveforms based on a parameterization of observed differences in ionization signals from the TPC between data and simulation, while remaining insensitive to the details of the detector model. The modifications are then used to quantify the systematic differences in low- and high-level reconstructed quantities. This approach could be applied to future LArTPC detectors, such as those used in SBN and DUNE. △ Less

Submitted 16 June, 2022; v1 submitted 5 November, 2021; originally announced November 2021.

Comments: 14 pages, 12 figures, version accepted by EPJ C

Report number: FERMILAB-PUB-21-501-ND-SCD

Journal ref: Eur. Phys. J. C 82, 454 (2022)

Wire-Cell 3D Pattern Recognition Techniques for Neutrino Event Reconstruction in Large LArTPCs: Algorithm Description and Quantitative Evaluation with MicroBooNE Simulation

Authors: MicroBooNE collaboration, P. Abratenko, R. An, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, C. Barnes, G. Barr, V. Basque, L. Bathe-Peters, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bishai, A. Blake, T. Bolton, J. Y. Book, L. Camilleri, D. Caratelli, I. Caro Terrazas, R. Castillo Fernandez , et al. (163 additional authors not shown)

Abstract: Wire-Cell is a 3D event reconstruction package for liquid argon time projection chambers. Through geometry, time, and drifted charge from multiple readout wire planes, 3D space points with associated charge are reconstructed prior to the pattern recognition stage. Pattern recognition techniques, including track trajectory and $dQ/dx$ (ionization charge per unit length) fitting, 3D neutrino vertex… ▽ More Wire-Cell is a 3D event reconstruction package for liquid argon time projection chambers. Through geometry, time, and drifted charge from multiple readout wire planes, 3D space points with associated charge are reconstructed prior to the pattern recognition stage. Pattern recognition techniques, including track trajectory and $dQ/dx$ (ionization charge per unit length) fitting, 3D neutrino vertex fitting, track and shower separation, particle-level clustering, and particle identification are then applied on these 3D space points as well as the original 2D projection measurements. A deep neural network is developed to enhance the reconstruction of the neutrino interaction vertex. Compared to traditional algorithms, the deep neural network boosts the vertex efficiency by a relative 30\% for charged-current $ν_e$ interactions. This pattern recognition achieves 80-90\% reconstruction efficiencies for primary leptons, after a 65.8\% (72.9\%) vertex efficiency for charged-current $ν_e$ ($ν_μ$) interactions. Based on the resulting reconstructed particles and their kinematics, we also achieve 15-20\% energy reconstruction resolutions for charged-current neutrino interactions. △ Less

Submitted 26 December, 2021; v1 submitted 26 October, 2021; originally announced October 2021.

Report number: FERMILAB-PUB-21-509-ND

First Measurement of Inclusive Electron-Neutrino and Antineutrino Charged Current Differential Cross Sections in Charged Lepton Energy on Argon in MicroBooNE

Authors: MicroBooNE collaboration, P. Abratenko, R. An, J. Anthony, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, C. Barnes, G. Barr, V. Basque, L. Bathe-Peters, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bishai, A. Blake, T. Bolton, J. Y. Book, L. Camilleri, D. Caratelli, I. Caro Terrazas, R. Castillo Fernandez , et al. (163 additional authors not shown)

Abstract: We present the first measurement of the single-differential $ν_e + \barν_e$ charged-current inclusive cross sections on argon in electron or positron energy and in electron or positron scattering cosine over the full angular range. Data were collected using the MicroBooNE liquid argon time projection chamber located off-axis from the Fermilab Neutrinos at the Main Injector beam over an exposure of… ▽ More We present the first measurement of the single-differential $ν_e + \barν_e$ charged-current inclusive cross sections on argon in electron or positron energy and in electron or positron scattering cosine over the full angular range. Data were collected using the MicroBooNE liquid argon time projection chamber located off-axis from the Fermilab Neutrinos at the Main Injector beam over an exposure of $2.0\times10^{20}$ protons on target. The signal definition includes a 60 MeV threshold on the $ν_e$ or $\barν_e$ energy and a 120 MeV threshold on the electron or positron energy. The measured total and differential cross sections are found to be in agreement with the GENIE, NuWro, and GiBUU neutrino generators. △ Less

Submitted 3 February, 2022; v1 submitted 14 September, 2021; originally announced September 2021.

Comments: 7 Pages, 2 figures. Supplemental materials include cross section values, efficiencies, purity, flux, fractional uncertainties, additional smearing matrices, and unfolded covariance matrices

Report number: FERMILAB-PUB-21-443-ND

Journal ref: Phys. Rev. D 105, L051102 (2022)

Calorimetric classification of track-like signatures in liquid argon TPCs using MicroBooNE data

Authors: MicroBooNE collaboration, P. Abratenko, R. An, J. Anthony, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, C. Barnes, G. Barr, V. Basque, L. Bathe-Peters, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bishai, A. Blake, T. Bolton, L. Camilleri, D. Caratelli, I. Caro Terrazas, R. Castillo Fernandez, F. Cavanna, G. Cerati , et al. (157 additional authors not shown)

Abstract: The MicroBooNE liquid argon time projection chamber located at Fermilab is a neutrino experiment dedicated to the study of short-baseline oscillations, the measurements of neutrino cross sections in liquid argon, and to the research and development of this novel detector technology. Accurate and precise measurements of calorimetry are essential to the event reconstruction and are achieved by lever… ▽ More The MicroBooNE liquid argon time projection chamber located at Fermilab is a neutrino experiment dedicated to the study of short-baseline oscillations, the measurements of neutrino cross sections in liquid argon, and to the research and development of this novel detector technology. Accurate and precise measurements of calorimetry are essential to the event reconstruction and are achieved by leveraging the TPC to measure deposited energy per unit length along the particle trajectory, with mm resolution. We describe the non-uniform calorimetric reconstruction performance in the detector, showing dependence on the angle of the particle trajectory. Such non-uniform reconstruction directly affects the performance of the particle identification algorithms which infer particle type from calorimetric measurements. This work presents a new particle identification method which accounts for and effectively addresses such non-uniformity. The newly developed method shows improved performance compared to previous algorithms, illustrated by a 94% proton selection efficiency and a 10% muon mis-identification rate, with a fairly loose selection of tracks performed on beam data. The performance is further demonstrated by identifying exclusive final states in $ν_μ CC$ interactions. While developed using MicroBooNE data and simulation, this method is easily applicable to future LArTPC experiments, such as SBND, ICARUS, and DUNE. △ Less

Submitted 4 January, 2022; v1 submitted 31 August, 2021; originally announced September 2021.

Comments: 17 pages, 9 figures The updated version contains a clearer fig 1, some better quantification of physics reach in section 6.3, while several typos have been fixed

Report number: FERMILAB-PUB-21-356-E

Journal ref: Journal of High Energy Physics volume 2021, Article number: 153 (2021)

Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1132 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t… ▽ More The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Report number: FERMILAB-PUB-21-391-ND